Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=6821): Process ended prematurely: osmo-stp_10.42.42.5(pid=6821) [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6821)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 12:14:16.571119 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:14:16.585264 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 12:14:16.750297 tst cs_paging_gprs_active.py: using LAC 28321 12:14:16.866401 tst cs_paging_gprs_active.py: using RAC 16 12:14:16.982918 tst cs_paging_gprs_active.py: using CellId 28321 12:14:17.098024 tst cs_paging_gprs_active.py: using BVCI 28322 12:14:17.121470 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:14:17.132811 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:14:17.144404 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:14:17.156202 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:14:17.167496 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:14:17.179019 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:14:17.190408 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:14:17.201552 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:14:17.212800 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:14:17.334394 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:14:17.610266 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:14:17.735235 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:14:18.042570 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6811): Launched 12:14:18.297833 run iperf3-srv_10.42.42.10(pid=6812): Launched 12:14:18.479228 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:14:18.602268 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:14:18.909323 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6813): Launched 12:14:19.163421 run iperf3-srv_10.42.42.10(pid=6814): Launched 12:14:19.343950 tst cs_paging_gprs_active.py:38: start network... 12:14:19.466901 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:14:19.941410 run create_hlr_db(pid=6815): Launched 12:14:20.111575 bus /gobi_6: Setting Powered False 12:14:21.134005 run create_hlr_db(pid=6815): Terminated: ok {rc=0} 12:14:21.529570 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6817): Launched 12:14:21.825785 run osmo-hlr_10.42.42.2(pid=6818): Launched 12:14:21.934290 run osmo-stp_10.42.42.5: Starting osmo-stp 12:14:22.447312 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6820): Launched 12:14:22.743909 run osmo-stp_10.42.42.5(pid=6821): Launched 12:14:22.852026 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:14:23.367586 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6823): Launched 12:14:23.472401 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:14:23.736917 run patchelf(pid=6824): Launched 12:14:23.910755 run osmo-stp_10.42.42.5(pid=6821): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6821)] 12:14:24.037655 run osmo-stp_10.42.42.5(pid=6821): stdout: | (launched: 2022-12-10_12:14:22.598127) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:14:24.165259 run osmo-stp_10.42.42.5(pid=6821): stderr: | �[0;m�[38;5;43m20221210121422773 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210121422773 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210121422773 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210121422774 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210121422774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210121422774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210121422774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:14:24.287591 run osmo-stp_10.42.42.5(pid=6821): stdout: | (launched: 2022-12-10_12:14:22.598127) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:14:24.408903 run osmo-stp_10.42.42.5(pid=6821): stderr: | �[0;m�[38;5;43m20221210121422773 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210121422773 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210121422773 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210121422774 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210121422774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210121422774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210121422774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:14:24.551582 run patchelf(pid=6824): Terminating (SIGINT) 12:14:24.718413 run patchelf(pid=6824): Terminated: ok {rc=0} 12:14:24.749201 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6821): Process ended prematurely: osmo-stp_10.42.42.5(pid=6821) [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6821)] [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 12:14:24.758347 tst cs_paging_gprs_active.py:38: Test FAILED (8.2 sec) 12:14:24.817345 run osmo-hlr_10.42.42.2(pid=6818): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6818)] 12:14:24.865346 run osmo-hlr_10.42.42.2(pid=6818): stdout: | (launched: 2022-12-10_12:14:21.679947) 12:14:24.914473 run osmo-hlr_10.42.42.2(pid=6818): stderr: | �[0;m�[1;31m20221210121421855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210121421855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210121421855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210121421855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210121421855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210121421855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210121421867 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210121421878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210121421878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210121421878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:14:24.955819 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6811): Terminating (SIGTERM) 12:14:24.994697 run iperf3-srv_10.42.42.10(pid=6812): Terminating (SIGTERM) 12:14:25.033568 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6813): Terminating (SIGTERM) 12:14:25.072284 run iperf3-srv_10.42.42.10(pid=6814): Terminating (SIGTERM) 12:14:25.111207 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6817): Terminating (SIGTERM) 12:14:25.149959 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6820): Terminating (SIGTERM) 12:14:25.188800 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6823): Terminating (SIGTERM) 12:14:25.197548 --- ParallelTerminationStrategy: PID 6811 died... 12:14:25.249587 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6811): Terminated: ok {rc=0} 12:14:25.258947 --- ParallelTerminationStrategy: PID 6812 died... 12:14:25.310897 run iperf3-srv_10.42.42.10(pid=6812): Terminated {rc=256} 12:14:25.320238 --- ParallelTerminationStrategy: PID 6813 died... 12:14:25.372109 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6813): Terminated: ok {rc=0} 12:14:25.381594 --- ParallelTerminationStrategy: PID 6814 died... 12:14:25.433454 run iperf3-srv_10.42.42.10(pid=6814): Terminated {rc=256} 12:14:25.442802 --- ParallelTerminationStrategy: PID 6817 died... 12:14:25.494690 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6817): Terminated: ok {rc=0} 12:14:25.504039 --- ParallelTerminationStrategy: PID 6820 died... 12:14:25.555988 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6820): Terminated: ok {rc=0} 12:14:25.565758 --- ParallelTerminationStrategy: PID 6823 died... 12:14:25.618216 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6823): Terminated: ok {rc=0} 12:14:25.705483 bus /gobi_0: Setting Powered False 12:14:26.811115 bus /gobi_0: Setting Powered False 12:14:27.917729 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6821): Process ended prematurely: osmo-stp_10.42.42.5(pid=6821) [trial-2374↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6821)]