Failed
gprs:trx-umtrx.cs_paging_gprs_active.py (from gprs_trx-umtrx)
Stacktrace
osmo-stp_10.42.42.5(pid=4594): Process ended prematurely: osmo-stp_10.42.42.5(pid=4594) [trial-2374↪gprs:trx-umtrx↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4594)]
Standard Output
---------------------------------------------- trial-2374 gprs:trx-umtrx cs_paging_gprs_active.py ---------------------------------------------- 11:54:36.448899 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:54:36.459414 tst gprs:trx-umtrx: Using 1 x bts (candidates: 1) 11:54:36.593491 tst cs_paging_gprs_active.py: using LAC 28217 11:54:36.709601 tst cs_paging_gprs_active.py: using RAC 167 11:54:36.826673 tst cs_paging_gprs_active.py: using CellId 28217 11:54:36.943167 tst cs_paging_gprs_active.py: using BVCI 28218 11:54:36.966187 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:54:36.976625 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:54:36.986862 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:54:36.997451 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:54:37.007959 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:54:37.018451 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:54:37.029082 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:54:37.039509 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:54:37.050094 tst gprs:trx-umtrx: Using 1 x modem (candidates: 4) 11:54:37.165984 tst gprs:trx-umtrx: Using 1 x modem (candidates: 4) 11:54:37.459761 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:54:37.595036 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:54:37.928792 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4584): Launched 11:54:38.206211 run iperf3-srv_10.42.42.10(pid=4585): Launched 11:54:38.404485 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:54:38.538985 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:54:38.871985 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4586): Launched 11:54:39.149064 run iperf3-srv_10.42.42.10(pid=4587): Launched 11:54:39.346793 tst cs_paging_gprs_active.py:38: start network... 11:54:39.481484 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:54:39.999303 run create_hlr_db(pid=4588): Launched 11:54:40.186214 bus /sierra_2: Setting Powered False 11:54:41.207739 run create_hlr_db(pid=4588): Terminated: ok {rc=0} 11:54:41.614486 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4590): Launched 11:54:41.916679 run osmo-hlr_10.42.42.2(pid=4591): Launched 11:54:42.027343 run osmo-stp_10.42.42.5: Starting osmo-stp 11:54:42.548602 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4593): Launched 11:54:42.849585 run osmo-stp_10.42.42.5(pid=4594): Launched 11:54:42.959067 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:54:43.483264 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4596): Launched 11:54:43.590096 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:54:43.851959 run patchelf(pid=4597): Launched 11:54:44.028317 run osmo-stp_10.42.42.5(pid=4594): ERR: Terminated: ERROR {rc=1} [trial-2374↪gprs:trx-umtrx↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4594)] 11:54:44.157367 run osmo-stp_10.42.42.5(pid=4594): stdout: | (launched: 2022-12-10_11:54:42.701157) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:54:44.286980 run osmo-stp_10.42.42.5(pid=4594): stderr: | �[0;m�[38;5;43m20221210115442870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210115442870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210115442871 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210115442871 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210115442871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210115442872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210115442872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:54:44.412248 run osmo-stp_10.42.42.5(pid=4594): stdout: | (launched: 2022-12-10_11:54:42.701157) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:54:44.535932 run osmo-stp_10.42.42.5(pid=4594): stderr: | �[0;m�[38;5;43m20221210115442870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210115442870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210115442871 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210115442871 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210115442871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210115442872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210115442872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:54:44.679423 run patchelf(pid=4597): Terminating (SIGINT) 11:54:44.848806 run patchelf(pid=4597): Terminated: ok {rc=0} 11:54:44.879947 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4594): Process ended prematurely: osmo-stp_10.42.42.5(pid=4594) [trial-2374↪gprs:trx-umtrx↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4594)] [trial-2374↪gprs:trx-umtrx↪cs_paging_gprs_active.py:38] 11:54:44.889146 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 11:54:44.949043 run osmo-hlr_10.42.42.2(pid=4591): ERR: Terminated: ERROR {rc=237} [trial-2374↪gprs:trx-umtrx↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4591)] 11:54:44.997397 run osmo-hlr_10.42.42.2(pid=4591): stdout: | (launched: 2022-12-10_11:54:41.767674) 11:54:45.046500 run osmo-hlr_10.42.42.2(pid=4591): stderr: | �[0;m�[1;31m20221210115441942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210115441942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210115441942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210115441942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210115441942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210115441942 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210115441959 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-umtrx/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210115441970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210115441970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210115441970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:54:45.088019 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4584): Terminating (SIGTERM) 11:54:45.127608 run iperf3-srv_10.42.42.10(pid=4585): Terminating (SIGTERM) 11:54:45.167228 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4586): Terminating (SIGTERM) 11:54:45.206591 run iperf3-srv_10.42.42.10(pid=4587): Terminating (SIGTERM) 11:54:45.245959 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4590): Terminating (SIGTERM) 11:54:45.285291 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4593): Terminating (SIGTERM) 11:54:45.324706 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4596): Terminating (SIGTERM) 11:54:45.334088 --- ParallelTerminationStrategy: PID 4584 died... 11:54:45.387142 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4584): Terminated: ok {rc=0} 11:54:45.396616 --- ParallelTerminationStrategy: PID 4585 died... 11:54:45.449245 run iperf3-srv_10.42.42.10(pid=4585): Terminated {rc=256} 11:54:45.458674 --- ParallelTerminationStrategy: PID 4586 died... 11:54:45.511242 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4586): Terminated: ok {rc=0} 11:54:45.520726 --- ParallelTerminationStrategy: PID 4587 died... 11:54:45.573414 run iperf3-srv_10.42.42.10(pid=4587): Terminated {rc=256} 11:54:45.582927 --- ParallelTerminationStrategy: PID 4590 died... 11:54:45.635735 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4590): Terminated: ok {rc=0} 11:54:45.645303 --- ParallelTerminationStrategy: PID 4593 died... 11:54:45.697960 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4593): Terminated: ok {rc=0} 11:54:45.707539 --- ParallelTerminationStrategy: PID 4596 died... 11:54:45.760354 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4596): Terminated: ok {rc=0} 11:54:45.847933 bus /gobi_0: Setting Powered False 11:54:46.965084 bus /gobi_0: Setting Powered False 11:54:48.074985 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4594): Process ended prematurely: osmo-stp_10.42.42.5(pid=4594) [trial-2374↪gprs:trx-umtrx↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4594)]