Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 45 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=9514): Process ended prematurely: osmo-stp_10.42.42.5(pid=9514) [trial-2375↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9514)]

Standard Output

----------------------------------------------
trial-2375 gprs:sysmo ping.py
----------------------------------------------
12:48:36.704059 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:48:36.715942 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
12:48:36.849536 tst                          ping.py: using LAC 28502
12:48:36.979983 tst                          ping.py: using RAC 197
12:48:37.109002 tst                          ping.py: using CellId 28502
12:48:37.237736 tst                          ping.py: using BVCI 28503
12:48:37.263259 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:48:37.274407 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:48:37.285353 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:48:37.296179 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:48:37.306984 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:48:37.317709 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:48:37.328689 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:48:37.339604 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
12:48:37.625447 tst                       ping.py:19: start network...
12:48:37.755268 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:48:38.248671 run          create_hlr_db(pid=9508): Launched
12:48:38.427847 bus                          /gobi_6: Setting Powered False
12:48:39.449100 run          create_hlr_db(pid=9508): Terminated: ok {rc=0}
12:48:39.872021 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9510): Launched
12:48:40.185631 run    osmo-hlr_10.42.42.2(pid=9511): Launched
12:48:40.307135 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:48:40.861051 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9513): Launched
12:48:41.172935 run    osmo-stp_10.42.42.5(pid=9514): Launched
12:48:41.286740 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:48:41.832090 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9516): Launched
12:48:41.942518 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:48:42.217168 run               patchelf(pid=9517): Launched
12:48:42.399773 run    osmo-stp_10.42.42.5(pid=9514): ERR: Terminated: ERROR {rc=1}  [trial-2375↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9514)]
12:48:42.532640 run    osmo-stp_10.42.42.5(pid=9514): stdout: 
| (launched: 2022-12-10_12:48:41.018215)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:48:42.666171 run    osmo-stp_10.42.42.5(pid=9514): stderr: 
| �[0;m�[38;5;43m20221210124841192 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210124841193 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210124841193 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210124841193 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210124841195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210124841196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210124841196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:48:42.794966 run    osmo-stp_10.42.42.5(pid=9514): stdout: 
| (launched: 2022-12-10_12:48:41.018215)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:48:42.923714 run    osmo-stp_10.42.42.5(pid=9514): stderr: 
| �[0;m�[38;5;43m20221210124841192 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210124841193 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210124841193 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210124841193 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210124841195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210124841196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210124841196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:48:43.072704 run               patchelf(pid=9517): Terminating (SIGINT)
12:48:43.247597 run               patchelf(pid=9517): Terminated: ok {rc=0}
12:48:43.278997 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=9514): Process ended prematurely: osmo-stp_10.42.42.5(pid=9514) [trial-2375↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9514)]  [trial-2375↪gprs:sysmo↪ping.py:22]
12:48:43.287638 tst                       ping.py:22: Test FAILED (6.6 sec)
12:48:43.350082 run    osmo-hlr_10.42.42.2(pid=9511): ERR: Terminated: ERROR {rc=237}  [trial-2375↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9511)]
12:48:43.399915 run    osmo-hlr_10.42.42.2(pid=9511): stdout: 
| (launched: 2022-12-10_12:48:40.030081) 
12:48:43.450510 run    osmo-hlr_10.42.42.2(pid=9511): stderr: 
| �[0;m�[1;31m20221210124840208 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210124840208 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210124840208 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210124840208 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210124840208 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210124840208 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210124840220 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210124840228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210124840228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210124840228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
12:48:43.493645 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9510): Terminating (SIGTERM)
12:48:43.534568 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9513): Terminating (SIGTERM)
12:48:43.575511 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9516): Terminating (SIGTERM)
12:48:43.585208 ---      ParallelTerminationStrategy: PID 9510 died...
12:48:43.639492 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9510): Terminated: ok {rc=0}
12:48:43.649505 ---      ParallelTerminationStrategy: PID 9513 died...
12:48:43.703875 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9513): Terminated: ok {rc=0}
12:48:43.713735 ---      ParallelTerminationStrategy: PID 9516 died...
12:48:43.768422 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9516): Terminated: ok {rc=0}
12:48:43.857721 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9514): Process ended prematurely: osmo-stp_10.42.42.5(pid=9514) [trial-2375↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9514)]