Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=12418): Process ended prematurely: osmo-stp_10.42.42.5(pid=12418) [trial-2375↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12418)]
Standard Output
---------------------------------------------- trial-2375 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:14:08.200748 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:14:08.211679 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:14:08.350115 tst cs_paging_gprs_active.py: using LAC 28639 13:14:08.468505 tst cs_paging_gprs_active.py: using RAC 79 13:14:08.593673 tst cs_paging_gprs_active.py: using CellId 28639 13:14:08.719010 tst cs_paging_gprs_active.py: using BVCI 28640 13:14:08.743662 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:14:08.754885 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:14:08.765906 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:14:08.776904 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:14:08.787862 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:14:08.799025 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:14:08.810130 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:14:08.821009 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:14:08.832075 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:14:08.947340 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:14:09.224384 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:14:09.349601 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:14:09.659324 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12407): Launched 13:14:09.917278 run iperf3-srv_10.42.42.10(pid=12408): Launched 13:14:10.099564 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:14:10.224719 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:14:10.534464 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12409): Launched 13:14:10.792800 run iperf3-srv_10.42.42.10(pid=12410): Launched 13:14:10.977082 tst cs_paging_gprs_active.py:38: start network... 13:14:11.102837 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:14:11.576585 run create_hlr_db(pid=12411): Launched 13:14:11.749488 bus /gobi_6: Setting Powered False 13:14:12.770405 run create_hlr_db(pid=12411): Terminated: ok {rc=0} 13:14:13.195621 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12414): Launched 13:14:13.518278 run osmo-hlr_10.42.42.2(pid=12415): Launched 13:14:13.640767 run osmo-stp_10.42.42.5: Starting osmo-stp 13:14:14.195956 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12417): Launched 13:14:14.516231 run osmo-stp_10.42.42.5(pid=12418): Launched 13:14:14.633974 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:14:15.192665 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12420): Launched 13:14:15.307057 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:14:15.584304 run patchelf(pid=12421): Launched 13:14:15.770949 run osmo-stp_10.42.42.5(pid=12418): ERR: Terminated: ERROR {rc=1} [trial-2375↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12418)] 13:14:15.914867 run osmo-stp_10.42.42.5(pid=12418): stdout: | (launched: 2022-12-10_13:14:14.359578) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:14:16.047817 run osmo-stp_10.42.42.5(pid=12418): stderr: | �[0;m�[38;5;43m20221210131414550 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210131414550 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210131414550 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210131414551 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210131414553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210131414553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210131414553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:14:16.178481 run osmo-stp_10.42.42.5(pid=12418): stdout: | (launched: 2022-12-10_13:14:14.359578) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:14:16.307573 run osmo-stp_10.42.42.5(pid=12418): stderr: | �[0;m�[38;5;43m20221210131414550 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210131414550 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210131414550 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210131414551 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210131414553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210131414553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210131414553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:14:16.456800 run patchelf(pid=12421): Terminating (SIGINT) 13:14:16.631596 run patchelf(pid=12421): Terminated: ok {rc=0} 13:14:16.664700 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12418): Process ended prematurely: osmo-stp_10.42.42.5(pid=12418) [trial-2375↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12418)] [trial-2375↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:14:16.675567 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 13:14:16.741255 run osmo-hlr_10.42.42.2(pid=12415): ERR: Terminated: ERROR {rc=237} [trial-2375↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12415)] 13:14:16.793189 run osmo-hlr_10.42.42.2(pid=12415): stdout: | (launched: 2022-12-10_13:14:13.359062) 13:14:16.845567 run osmo-hlr_10.42.42.2(pid=12415): stderr: | �[0;m�[1;31m20221210131413554 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210131413554 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210131413555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210131413555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210131413555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210131413555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210131413566 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210131413575 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210131413575 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210131413575 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:14:16.890537 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12407): Terminating (SIGTERM) 13:14:16.935169 run iperf3-srv_10.42.42.10(pid=12408): Terminating (SIGTERM) 13:14:16.977265 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12409): Terminating (SIGTERM) 13:14:17.018721 run iperf3-srv_10.42.42.10(pid=12410): Terminating (SIGTERM) 13:14:17.060642 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12414): Terminating (SIGTERM) 13:14:17.106111 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12417): Terminating (SIGTERM) 13:14:17.149187 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12420): Terminating (SIGTERM) 13:14:17.160376 --- ParallelTerminationStrategy: PID 12407 died... 13:14:17.218258 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12407): Terminated: ok {rc=0} 13:14:17.228681 --- ParallelTerminationStrategy: PID 12408 died... 13:14:17.283125 run iperf3-srv_10.42.42.10(pid=12408): Terminated {rc=256} 13:14:17.293012 --- ParallelTerminationStrategy: PID 12409 died... 13:14:17.346599 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12409): Terminated: ok {rc=0} 13:14:17.356260 --- ParallelTerminationStrategy: PID 12410 died... 13:14:17.409227 run iperf3-srv_10.42.42.10(pid=12410): Terminated {rc=256} 13:14:17.419493 --- ParallelTerminationStrategy: PID 12414 died... 13:14:17.473497 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12414): Terminated: ok {rc=0} 13:14:17.483020 --- ParallelTerminationStrategy: PID 12417 died... 13:14:17.536555 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12417): Terminated: ok {rc=0} 13:14:17.546094 --- ParallelTerminationStrategy: PID 12420 died... 13:14:17.599668 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12420): Terminated: ok {rc=0} 13:14:17.686568 bus /gobi_0: Setting Powered False 13:14:18.791850 bus /gobi_0: Setting Powered False 13:14:19.901508 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12418): Process ended prematurely: osmo-stp_10.42.42.5(pid=12418) [trial-2375↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12418)]