Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=22022): Process ended prematurely: osmo-stp_10.42.42.5(pid=22022) [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22022)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 16:01:14.597662 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:14.608940 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 16:01:14.774479 tst cs_paging_gprs_active.py: using LAC 29058 16:01:14.900084 tst cs_paging_gprs_active.py: using RAC 243 16:01:15.027229 tst cs_paging_gprs_active.py: using CellId 29058 16:01:15.152126 tst cs_paging_gprs_active.py: using BVCI 29059 16:01:15.176895 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:15.188321 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:15.199471 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:15.210837 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:15.221981 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:15.233137 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:15.244338 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:15.255407 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:01:15.266700 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:01:15.381435 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:01:15.675830 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:01:15.811747 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:01:16.184872 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22012): Launched 16:01:16.540073 run iperf3-srv_10.42.42.10(pid=22013): Launched 16:01:16.743035 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:01:16.881278 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:01:17.235537 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22014): Launched 16:01:17.514630 run iperf3-srv_10.42.42.10(pid=22015): Launched 16:01:17.714208 tst cs_paging_gprs_active.py:38: start network... 16:01:17.849769 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:01:18.366802 run create_hlr_db(pid=22016): Launched 16:01:18.554803 bus /gobi_6: Setting Powered False 16:01:19.575734 run create_hlr_db(pid=22016): Terminated: ok {rc=0} 16:01:19.984021 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22018): Launched 16:01:20.287971 run osmo-hlr_10.42.42.2(pid=22019): Launched 16:01:20.407903 run osmo-stp_10.42.42.5: Starting osmo-stp 16:01:20.948187 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22021): Launched 16:01:21.272372 run osmo-stp_10.42.42.5(pid=22022): Launched 16:01:21.391411 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:01:21.954799 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22024): Launched 16:01:22.070262 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:01:22.352865 run patchelf(pid=22025): Launched 16:01:22.541827 run osmo-stp_10.42.42.5(pid=22022): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22022)] 16:01:22.681137 run osmo-stp_10.42.42.5(pid=22022): stdout: | (launched: 2022-12-10_16:01:21.113381) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:01:22.819628 run osmo-stp_10.42.42.5(pid=22022): stderr: | �[0;m�[38;5;43m20221210160121304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210160121304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210160121304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210160121305 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210160121305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210160121305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210160121305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:01:22.953257 run osmo-stp_10.42.42.5(pid=22022): stdout: | (launched: 2022-12-10_16:01:21.113381) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:01:23.086092 run osmo-stp_10.42.42.5(pid=22022): stderr: | �[0;m�[38;5;43m20221210160121304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210160121304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210160121304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210160121305 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210160121305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210160121305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210160121305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:01:23.241314 run patchelf(pid=22025): Terminating (SIGINT) 16:01:23.423703 run patchelf(pid=22025): Terminated: ok {rc=0} 16:01:23.457059 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22022): Process ended prematurely: osmo-stp_10.42.42.5(pid=22022) [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22022)] [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 16:01:23.466772 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 16:01:23.529318 run osmo-hlr_10.42.42.2(pid=22019): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22019)] 16:01:23.580520 run osmo-hlr_10.42.42.2(pid=22019): stdout: | (launched: 2022-12-10_16:01:20.138599) 16:01:23.632345 run osmo-hlr_10.42.42.2(pid=22019): stderr: | �[0;m�[1;31m20221210160120316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210160120316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210160120316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210160120316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210160120316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210160120316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210160120329 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210160120337 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210160120338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210160120338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:01:23.676987 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22012): Terminating (SIGTERM) 16:01:23.718974 run iperf3-srv_10.42.42.10(pid=22013): Terminating (SIGTERM) 16:01:23.760901 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22014): Terminating (SIGTERM) 16:01:23.802801 run iperf3-srv_10.42.42.10(pid=22015): Terminating (SIGTERM) 16:01:23.844547 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22018): Terminating (SIGTERM) 16:01:23.886419 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22021): Terminating (SIGTERM) 16:01:23.928253 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22024): Terminating (SIGTERM) 16:01:23.937917 --- ParallelTerminationStrategy: PID 22012 died... 16:01:23.993908 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22012): Terminated: ok {rc=0} 16:01:24.004072 --- ParallelTerminationStrategy: PID 22013 died... 16:01:24.059536 run iperf3-srv_10.42.42.10(pid=22013): Terminated {rc=256} 16:01:24.069606 --- ParallelTerminationStrategy: PID 22014 died... 16:01:24.124938 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22014): Terminated: ok {rc=0} 16:01:24.134982 --- ParallelTerminationStrategy: PID 22015 died... 16:01:24.190200 run iperf3-srv_10.42.42.10(pid=22015): Terminated {rc=256} 16:01:24.200249 --- ParallelTerminationStrategy: PID 22018 died... 16:01:24.255360 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22018): Terminated: ok {rc=0} 16:01:24.265342 --- ParallelTerminationStrategy: PID 22021 died... 16:01:24.321345 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22021): Terminated: ok {rc=0} 16:01:24.331371 --- ParallelTerminationStrategy: PID 22024 died... 16:01:24.387148 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22024): Terminated: ok {rc=0} 16:01:24.474359 bus /gobi_0: Setting Powered False 16:01:25.578466 bus /gobi_0: Setting Powered False 16:01:26.689376 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22022): Process ended prematurely: osmo-stp_10.42.42.5(pid=22022) [trial-2376↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22022)]