Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21779): Process ended prematurely: osmo-stp_10.42.42.5(pid=21779) [trial-2376↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21779)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:00:14.525563 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:14.536913 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:00:14.692664 tst cs_paging_gprs_active.py: using LAC 29053 16:00:14.824867 tst cs_paging_gprs_active.py: using RAC 238 16:00:14.965753 tst cs_paging_gprs_active.py: using CellId 29053 16:00:15.093204 tst cs_paging_gprs_active.py: using BVCI 29054 16:00:15.116859 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:15.128788 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:15.140824 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:15.152413 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:15.164645 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:15.177584 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:15.189365 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:15.201505 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:00:15.214643 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:00:15.339782 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:00:15.643552 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:00:15.777805 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:00:16.143103 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21769): Launched 16:00:16.440312 run iperf3-srv_10.42.42.10(pid=21770): Launched 16:00:16.640133 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:00:16.775885 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:00:17.124694 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21771): Launched 16:00:17.397424 run iperf3-srv_10.42.42.10(pid=21772): Launched 16:00:17.592349 tst cs_paging_gprs_active.py:38: start network... 16:00:17.725387 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:00:18.231381 run create_hlr_db(pid=21773): Launched 16:00:18.415491 bus /gobi_6: Setting Powered False 16:00:19.437083 run create_hlr_db(pid=21773): Terminated: ok {rc=0} 16:00:19.835176 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21775): Launched 16:00:20.129887 run osmo-hlr_10.42.42.2(pid=21776): Launched 16:00:20.238029 run osmo-stp_10.42.42.5: Starting osmo-stp 16:00:20.751052 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21778): Launched 16:00:21.046292 run osmo-stp_10.42.42.5(pid=21779): Launched 16:00:21.154426 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:00:21.669555 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21781): Launched 16:00:21.775398 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:00:22.034153 run patchelf(pid=21782): Launched 16:00:22.208190 run osmo-stp_10.42.42.5(pid=21779): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21779)] 16:00:22.335912 run osmo-stp_10.42.42.5(pid=21779): stdout: | (launched: 2022-12-10_16:00:20.901443) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:00:22.464003 run osmo-stp_10.42.42.5(pid=21779): stderr: | �[0;m�[38;5;43m20221210160021068 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210160021068 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210160021068 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210160021069 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210160021069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210160021069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210160021069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:00:22.587134 run osmo-stp_10.42.42.5(pid=21779): stdout: | (launched: 2022-12-10_16:00:20.901443) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:00:22.709038 run osmo-stp_10.42.42.5(pid=21779): stderr: | �[0;m�[38;5;43m20221210160021068 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210160021068 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210160021068 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210160021069 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210160021069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210160021069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210160021069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:00:22.851631 run patchelf(pid=21782): Terminating (SIGINT) 16:00:23.019066 run patchelf(pid=21782): Terminated: ok {rc=0} 16:00:23.050126 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21779): Process ended prematurely: osmo-stp_10.42.42.5(pid=21779) [trial-2376↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21779)] [trial-2376↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:00:23.059244 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 16:00:23.119980 run osmo-hlr_10.42.42.2(pid=21776): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21776)] 16:00:23.169474 run osmo-hlr_10.42.42.2(pid=21776): stdout: | (launched: 2022-12-10_16:00:19.985546) 16:00:23.219121 run osmo-hlr_10.42.42.2(pid=21776): stderr: | �[0;m�[1;31m20221210160020159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210160020159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210160020159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210160020159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210160020159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210160020159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210160020171 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210160020180 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210160020180 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210160020180 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:00:23.261429 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21769): Terminating (SIGTERM) 16:00:23.301862 run iperf3-srv_10.42.42.10(pid=21770): Terminating (SIGTERM) 16:00:23.342504 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21771): Terminating (SIGTERM) 16:00:23.384561 run iperf3-srv_10.42.42.10(pid=21772): Terminating (SIGTERM) 16:00:23.425942 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21775): Terminating (SIGTERM) 16:00:23.466899 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21778): Terminating (SIGTERM) 16:00:23.509241 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21781): Terminating (SIGTERM) 16:00:23.519015 --- ParallelTerminationStrategy: PID 21769 died... 16:00:23.574796 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21769): Terminated: ok {rc=0} 16:00:23.585356 --- ParallelTerminationStrategy: PID 21770 died... 16:00:23.641345 run iperf3-srv_10.42.42.10(pid=21770): Terminated {rc=256} 16:00:23.651699 --- ParallelTerminationStrategy: PID 21771 died... 16:00:23.707683 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21771): Terminated: ok {rc=0} 16:00:23.718095 --- ParallelTerminationStrategy: PID 21772 died... 16:00:23.773944 run iperf3-srv_10.42.42.10(pid=21772): Terminated {rc=256} 16:00:23.784480 --- ParallelTerminationStrategy: PID 21775 died... 16:00:23.839894 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21775): Terminated: ok {rc=0} 16:00:23.850486 --- ParallelTerminationStrategy: PID 21778 died... 16:00:23.905447 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21778): Terminated: ok {rc=0} 16:00:23.916599 --- ParallelTerminationStrategy: PID 21781 died... 16:00:23.971239 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21781): Terminated: ok {rc=0} 16:00:24.055439 bus /gobi_0: Setting Powered False 16:00:25.160902 bus /gobi_0: Setting Powered False 16:00:26.276448 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21779): Process ended prematurely: osmo-stp_10.42.42.5(pid=21779) [trial-2376↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21779)]