Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)

Failing for the past 238 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=24830): Process ended prematurely: osmo-stp_10.42.42.5(pid=24830) [trial-2376↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24830)]

Standard Output

----------------------------------------------
trial-2376 gprs:trx-lms-limenet-micro ping.py
----------------------------------------------
16:33:36.778801 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
16:33:36.790402 tst       gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
16:33:36.920554 tst                          ping.py: using LAC 29231
16:33:37.034119 tst                          ping.py: using RAC 161
16:33:37.150101 tst                          ping.py: using CellId 29231
16:33:37.271805 tst                          ping.py: using BVCI 29232
16:33:37.295754 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
16:33:37.307144 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
16:33:37.318466 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
16:33:37.330323 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
16:33:37.341975 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
16:33:37.353718 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
16:33:37.365506 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
16:33:37.377087 tst       gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
16:33:37.646525 tst                       ping.py:19: start network...
16:33:37.766158 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
16:33:38.219881 run         create_hlr_db(pid=24824): Launched
16:33:38.386854 bus                          /gobi_6: Setting Powered False
16:33:39.408059 run         create_hlr_db(pid=24824): Terminated: ok {rc=0}
16:33:39.817284 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24826): Launched
16:33:40.126472 run   osmo-hlr_10.42.42.2(pid=24827): Launched
16:33:40.242378 run              osmo-stp_10.42.42.5: Starting osmo-stp
16:33:40.779950 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24829): Launched
16:33:41.088712 run   osmo-stp_10.42.42.5(pid=24830): Launched
16:33:41.201209 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
16:33:41.740090 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24832): Launched
16:33:41.849767 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
16:33:42.117964 run              patchelf(pid=24833): Launched
16:33:42.298419 run   osmo-stp_10.42.42.5(pid=24830): ERR: Terminated: ERROR {rc=1}  [trial-2376↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24830)]
16:33:42.430341 run   osmo-stp_10.42.42.5(pid=24830): stdout: 
| (launched: 2022-12-10_16:33:40.936740)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:33:42.562950 run   osmo-stp_10.42.42.5(pid=24830): stderr: 
| �[0;m�[38;5;43m20221210163341126 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210163341126 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210163341126 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210163341127 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210163341129 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210163341129 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210163341129 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:33:42.690559 run   osmo-stp_10.42.42.5(pid=24830): stdout: 
| (launched: 2022-12-10_16:33:40.936740)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:33:42.816929 run   osmo-stp_10.42.42.5(pid=24830): stderr: 
| �[0;m�[38;5;43m20221210163341126 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210163341126 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210163341126 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210163341127 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210163341129 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210163341129 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210163341129 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:33:42.964120 run              patchelf(pid=24833): Terminating (SIGINT)
16:33:43.136833 run              patchelf(pid=24833): Terminated: ok {rc=0}
16:33:43.168558 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=24830): Process ended prematurely: osmo-stp_10.42.42.5(pid=24830) [trial-2376↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24830)]  [trial-2376↪gprs:trx-lms-limenet-micro↪ping.py:22]
16:33:43.177658 tst                       ping.py:22: Test FAILED (6.4 sec)
16:33:43.239597 run   osmo-hlr_10.42.42.2(pid=24827): ERR: Terminated: ERROR {rc=237}  [trial-2376↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24827)]
16:33:43.290852 run   osmo-hlr_10.42.42.2(pid=24827): stdout: 
| (launched: 2022-12-10_16:33:39.975615) 
16:33:43.342584 run   osmo-hlr_10.42.42.2(pid=24827): stderr: 
| �[0;m�[1;31m20221210163340173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210163340173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210163340173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210163340173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210163340173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210163340173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210163340185 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210163340193 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210163340194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210163340194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
16:33:43.386644 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24826): Terminating (SIGTERM)
16:33:43.428286 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24829): Terminating (SIGTERM)
16:33:43.470475 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24832): Terminating (SIGTERM)
16:33:43.480253 ---      ParallelTerminationStrategy: PID 24826 died...
16:33:43.536027 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24826): Terminated: ok {rc=0}
16:33:43.546097 ---      ParallelTerminationStrategy: PID 24829 died...
16:33:43.601147 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24829): Terminated: ok {rc=0}
16:33:43.611145 ---      ParallelTerminationStrategy: PID 24832 died...
16:33:43.666325 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24832): Terminated: ok {rc=0}
16:33:43.752039 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24830): Process ended prematurely: osmo-stp_10.42.42.5(pid=24830) [trial-2376↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24830)]