Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20185): Process ended prematurely: osmo-stp_10.42.42.5(pid=20185) [trial-2376↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20185)]
Standard Output
---------------------------------------------- trial-2376 gprs:sysmo+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 15:46:45.617610 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:45.629549 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 15:46:45.780667 tst ping_idle_ping.py: using LAC 28979 15:46:45.931481 tst ping_idle_ping.py: using RAC 164 15:46:46.068063 tst ping_idle_ping.py: using CellId 28979 15:46:46.191002 tst ping_idle_ping.py: using BVCI 28980 15:46:46.216057 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:46.228217 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:46.240116 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:46.251874 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:46.263797 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:46.275710 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:46.287901 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:46:46.299719 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:46:46.587838 tst ping_idle_ping.py:24: start network... 15:46:46.722176 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:46:47.225062 run create_hlr_db(pid=20179): Launched 15:46:47.394279 bus /gobi_6: Setting Powered False 15:46:48.415872 run create_hlr_db(pid=20179): Terminated: ok {rc=0} 15:46:48.831047 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20181): Launched 15:46:49.122209 run osmo-hlr_10.42.42.2(pid=20182): Launched 15:46:49.232463 run osmo-stp_10.42.42.5: Starting osmo-stp 15:46:49.743167 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20184): Launched 15:46:50.034984 run osmo-stp_10.42.42.5(pid=20185): Launched 15:46:50.142047 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:46:50.651551 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20187): Launched 15:46:50.755617 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:46:51.010834 run patchelf(pid=20188): Launched 15:46:51.182537 run osmo-stp_10.42.42.5(pid=20185): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20185)] 15:46:51.308171 run osmo-stp_10.42.42.5(pid=20185): stdout: | (launched: 2022-12-10_15:46:49.891211) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:46:51.434411 run osmo-stp_10.42.42.5(pid=20185): stderr: | �[0;m�[38;5;43m20221210154650060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210154650060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210154650061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210154650061 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210154650062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210154650062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210154650062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:46:51.555483 run osmo-stp_10.42.42.5(pid=20185): stdout: | (launched: 2022-12-10_15:46:49.891211) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:46:51.675771 run osmo-stp_10.42.42.5(pid=20185): stderr: | �[0;m�[38;5;43m20221210154650060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210154650060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210154650061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210154650061 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210154650062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210154650062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210154650062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:46:51.816125 run patchelf(pid=20188): Terminating (SIGINT) 15:46:51.980371 run patchelf(pid=20188): Terminated: ok {rc=0} 15:46:52.010329 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=20185): Process ended prematurely: osmo-stp_10.42.42.5(pid=20185) [trial-2376↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20185)] [trial-2376↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 15:46:52.018833 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 15:46:52.078421 run osmo-hlr_10.42.42.2(pid=20182): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20182)] 15:46:52.128799 run osmo-hlr_10.42.42.2(pid=20182): stdout: | (launched: 2022-12-10_15:46:48.979013) 15:46:52.178949 run osmo-hlr_10.42.42.2(pid=20182): stderr: | �[0;m�[1;31m20221210154649151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210154649151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210154649151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210154649151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210154649151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210154649151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210154649164 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:sysmo+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210154649173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210154649173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210154649173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:46:52.221803 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20181): Terminating (SIGTERM) 15:46:52.261513 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20184): Terminating (SIGTERM) 15:46:52.301866 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20187): Terminating (SIGTERM) 15:46:52.311152 --- ParallelTerminationStrategy: PID 20181 died... 15:46:52.364832 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20181): Terminated: ok {rc=0} 15:46:52.374629 --- ParallelTerminationStrategy: PID 20184 died... 15:46:52.427729 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20184): Terminated: ok {rc=0} 15:46:52.437916 --- ParallelTerminationStrategy: PID 20187 died... 15:46:52.491045 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20187): Terminated: ok {rc=0} 15:46:52.574531 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20185): Process ended prematurely: osmo-stp_10.42.42.5(pid=20185) [trial-2376↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20185)]