Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=23491): Process ended prematurely: osmo-stp_10.42.42.5(pid=23491) [trial-2376↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23491)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 16:18:15.996792 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:16.008554 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 16:18:16.180355 tst cs_paging_gprs_active.py: using LAC 29149 16:18:16.315505 tst cs_paging_gprs_active.py: using RAC 79 16:18:16.438208 tst cs_paging_gprs_active.py: using CellId 29149 16:18:16.563554 tst cs_paging_gprs_active.py: using BVCI 29150 16:18:16.589573 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:16.601506 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:16.613519 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:16.626235 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:16.638350 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:16.650538 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:16.664126 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:16.676812 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:18:16.689090 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:18:16.815376 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:18:17.133097 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:18:17.261275 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:18:17.573552 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23481): Launched 16:18:17.830189 run iperf3-srv_10.42.42.10(pid=23482): Launched 16:18:18.012825 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:18:18.137158 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:18:18.446199 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23483): Launched 16:18:18.702857 run iperf3-srv_10.42.42.10(pid=23484): Launched 16:18:18.885444 tst cs_paging_gprs_active.py:38: start network... 16:18:19.009804 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:18:19.476614 run create_hlr_db(pid=23485): Launched 16:18:19.647875 bus /gobi_6: Setting Powered False 16:18:20.670528 run create_hlr_db(pid=23485): Terminated: ok {rc=0} 16:18:21.095265 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23487): Launched 16:18:21.414359 run osmo-hlr_10.42.42.2(pid=23488): Launched 16:18:21.533626 run osmo-stp_10.42.42.5: Starting osmo-stp 16:18:22.088629 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23490): Launched 16:18:22.406874 run osmo-stp_10.42.42.5(pid=23491): Launched 16:18:22.522364 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:18:23.080597 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23493): Launched 16:18:23.194828 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:18:23.481584 run patchelf(pid=23494): Launched 16:18:23.669832 run osmo-stp_10.42.42.5(pid=23491): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23491)] 16:18:23.807448 run osmo-stp_10.42.42.5(pid=23491): stdout: | (launched: 2022-12-10_16:18:22.250904) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:18:23.946426 run osmo-stp_10.42.42.5(pid=23491): stderr: | �[0;m�[38;5;43m20221210161822440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210161822440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210161822440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210161822441 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210161822441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210161822441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210161822441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:18:24.079542 run osmo-stp_10.42.42.5(pid=23491): stdout: | (launched: 2022-12-10_16:18:22.250904) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:18:24.211374 run osmo-stp_10.42.42.5(pid=23491): stderr: | �[0;m�[38;5;43m20221210161822440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210161822440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210161822440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210161822441 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210161822441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210161822441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210161822441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:18:24.364811 run patchelf(pid=23494): Terminating (SIGINT) 16:18:24.545188 run patchelf(pid=23494): Terminated: ok {rc=0} 16:18:24.578242 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23491): Process ended prematurely: osmo-stp_10.42.42.5(pid=23491) [trial-2376↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23491)] [trial-2376↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 16:18:24.588003 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 16:18:24.650989 run osmo-hlr_10.42.42.2(pid=23488): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23488)] 16:18:24.702905 run osmo-hlr_10.42.42.2(pid=23488): stdout: | (launched: 2022-12-10_16:18:21.258234) 16:18:24.755320 run osmo-hlr_10.42.42.2(pid=23488): stderr: | �[0;m�[1;31m20221210161821455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210161821455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210161821455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210161821455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210161821455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210161821455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210161821468 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210161821476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210161821476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210161821477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:18:24.800007 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23481): Terminating (SIGTERM) 16:18:24.842568 run iperf3-srv_10.42.42.10(pid=23482): Terminating (SIGTERM) 16:18:24.884869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23483): Terminating (SIGTERM) 16:18:24.926986 run iperf3-srv_10.42.42.10(pid=23484): Terminating (SIGTERM) 16:18:24.969285 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23487): Terminating (SIGTERM) 16:18:25.011649 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23490): Terminating (SIGTERM) 16:18:25.053928 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23493): Terminating (SIGTERM) 16:18:25.063991 --- ParallelTerminationStrategy: PID 23481 died... 16:18:25.120710 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23481): Terminated: ok {rc=0} 16:18:25.131168 --- ParallelTerminationStrategy: PID 23482 died... 16:18:25.187082 run iperf3-srv_10.42.42.10(pid=23482): Terminated {rc=256} 16:18:25.197606 --- ParallelTerminationStrategy: PID 23483 died... 16:18:25.253723 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23483): Terminated: ok {rc=0} 16:18:25.264084 --- ParallelTerminationStrategy: PID 23484 died... 16:18:25.320080 run iperf3-srv_10.42.42.10(pid=23484): Terminated {rc=256} 16:18:25.330349 --- ParallelTerminationStrategy: PID 23487 died... 16:18:25.386922 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23487): Terminated: ok {rc=0} 16:18:25.397379 --- ParallelTerminationStrategy: PID 23490 died... 16:18:25.453225 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23490): Terminated: ok {rc=0} 16:18:25.463567 --- ParallelTerminationStrategy: PID 23493 died... 16:18:25.519967 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23493): Terminated: ok {rc=0} 16:18:25.607200 bus /gobi_0: Setting Powered False 16:18:26.715567 bus /gobi_0: Setting Powered False 16:18:27.824669 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23491): Process ended prematurely: osmo-stp_10.42.42.5(pid=23491) [trial-2376↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23491)]