Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=23541): Process ended prematurely: osmo-stp_10.42.42.5(pid=23541) [trial-2376↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23541)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-umtrx+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 16:19:06.206318 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:19:06.218280 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 16:19:06.374386 tst ping_idle_ping.py: using LAC 29153 16:19:06.499155 tst ping_idle_ping.py: using RAC 83 16:19:06.617762 tst ping_idle_ping.py: using CellId 29153 16:19:06.737194 tst ping_idle_ping.py: using BVCI 29154 16:19:06.760776 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:19:06.771988 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:19:06.783361 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:19:06.795222 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:19:06.806709 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:19:06.818699 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:19:06.829850 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:19:06.841391 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:19:07.114783 tst ping_idle_ping.py:24: start network... 16:19:07.236561 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:19:07.692832 run create_hlr_db(pid=23535): Launched 16:19:07.860112 bus /gobi_6: Setting Powered False 16:19:08.881481 run create_hlr_db(pid=23535): Terminated: ok {rc=0} 16:19:09.266910 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23537): Launched 16:19:09.555732 run osmo-hlr_10.42.42.2(pid=23538): Launched 16:19:09.667213 run osmo-stp_10.42.42.5: Starting osmo-stp 16:19:10.171770 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23540): Launched 16:19:10.461748 run osmo-stp_10.42.42.5(pid=23541): Launched 16:19:10.567209 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:19:11.069886 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23543): Launched 16:19:11.172861 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:19:11.424372 run patchelf(pid=23544): Launched 16:19:11.593958 run osmo-stp_10.42.42.5(pid=23541): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23541)] 16:19:11.718089 run osmo-stp_10.42.42.5(pid=23541): stdout: | (launched: 2022-12-10_16:19:10.319373) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:19:11.842523 run osmo-stp_10.42.42.5(pid=23541): stderr: | �[0;m�[38;5;43m20221210161910490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210161910490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210161910490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210161910491 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210161910491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210161910491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210161910491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:19:11.963820 run osmo-stp_10.42.42.5(pid=23541): stdout: | (launched: 2022-12-10_16:19:10.319373) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:19:12.082858 run osmo-stp_10.42.42.5(pid=23541): stderr: | �[0;m�[38;5;43m20221210161910490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210161910490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210161910490 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210161910491 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210161910491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210161910491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210161910491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:19:12.221847 run patchelf(pid=23544): Terminating (SIGINT) 16:19:12.385644 run patchelf(pid=23544): Terminated: ok {rc=0} 16:19:12.415538 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=23541): Process ended prematurely: osmo-stp_10.42.42.5(pid=23541) [trial-2376↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23541)] [trial-2376↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 16:19:12.424208 tst ping_idle_ping.py:27: Test FAILED (6.2 sec) 16:19:12.484038 run osmo-hlr_10.42.42.2(pid=23538): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23538)] 16:19:12.532682 run osmo-hlr_10.42.42.2(pid=23538): stdout: | (launched: 2022-12-10_16:19:09.413741) 16:19:12.581415 run osmo-hlr_10.42.42.2(pid=23538): stderr: | �[0;m�[1;31m20221210161909590 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210161909590 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210161909590 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210161909590 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210161909590 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210161909590 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210161909601 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-umtrx+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210161909612 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210161909612 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210161909612 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:19:12.623463 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23537): Terminating (SIGTERM) 16:19:12.662889 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23540): Terminating (SIGTERM) 16:19:12.702343 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23543): Terminating (SIGTERM) 16:19:12.711676 --- ParallelTerminationStrategy: PID 23537 died... 16:19:12.764630 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23537): Terminated: ok {rc=0} 16:19:12.774738 --- ParallelTerminationStrategy: PID 23540 died... 16:19:12.828324 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23540): Terminated: ok {rc=0} 16:19:12.837839 --- ParallelTerminationStrategy: PID 23543 died... 16:19:12.890641 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23543): Terminated: ok {rc=0} 16:19:12.973638 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23541): Process ended prematurely: osmo-stp_10.42.42.5(pid=23541) [trial-2376↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23541)]