Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=20292): Process ended prematurely: osmo-stp_10.42.42.5(pid=20292) [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20292)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 19:41:23.258954 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:41:23.270471 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:41:23.420029 tst cs_paging_gprs_active.py: using LAC 31058 19:41:23.549792 tst cs_paging_gprs_active.py: using RAC 203 19:41:23.677585 tst cs_paging_gprs_active.py: using CellId 31058 19:41:23.806618 tst cs_paging_gprs_active.py: using BVCI 31059 19:41:23.831681 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:41:23.843294 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:41:23.854786 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:41:23.866450 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:41:23.877952 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:41:23.889549 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:41:23.901371 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:41:23.912749 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:41:23.924397 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:41:24.042190 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:41:24.324214 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:41:24.451422 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:41:24.770333 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20282): Launched 19:41:25.034894 run iperf3-srv_10.42.42.10(pid=20283): Launched 19:41:25.221423 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:41:25.347998 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:41:25.666747 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20284): Launched 19:41:25.930935 run iperf3-srv_10.42.42.10(pid=20285): Launched 19:41:26.116833 tst cs_paging_gprs_active.py:38: start network... 19:41:26.244257 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:41:26.734425 run create_hlr_db(pid=20286): Launched 19:41:26.910304 bus /gobi_6: Setting Powered False 19:41:27.931012 run create_hlr_db(pid=20286): Terminated: ok {rc=0} 19:41:28.368091 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20288): Launched 19:41:28.698671 run osmo-hlr_10.42.42.2(pid=20289): Launched 19:41:28.816543 run osmo-stp_10.42.42.5: Starting osmo-stp 19:41:29.386742 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20291): Launched 19:41:29.716478 run osmo-stp_10.42.42.5(pid=20292): Launched 19:41:29.835781 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:41:30.411798 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20294): Launched 19:41:30.528896 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:41:30.817706 run patchelf(pid=20295): Launched 19:41:31.027940 run osmo-stp_10.42.42.5(pid=20292): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20292)] 19:41:31.165327 run osmo-stp_10.42.42.5(pid=20292): stdout: | (launched: 2022-12-12_19:41:29.553739) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:41:31.300252 run osmo-stp_10.42.42.5(pid=20292): stderr: | �[0;m�[38;5;43m20221212194129747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212194129747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212194129747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212194129748 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212194129748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212194129748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212194129748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:41:31.432638 run osmo-stp_10.42.42.5(pid=20292): stdout: | (launched: 2022-12-12_19:41:29.553739) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:41:31.563852 run osmo-stp_10.42.42.5(pid=20292): stderr: | �[0;m�[38;5;43m20221212194129747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212194129747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212194129747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212194129748 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212194129748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212194129748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212194129748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:41:31.715087 run patchelf(pid=20295): Terminating (SIGINT) 19:41:31.894314 run patchelf(pid=20295): Terminated: ok {rc=0} 19:41:31.927347 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20292): Process ended prematurely: osmo-stp_10.42.42.5(pid=20292) [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20292)] [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 19:41:31.938632 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 19:41:32.001139 run osmo-hlr_10.42.42.2(pid=20289): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20289)] 19:41:32.055719 run osmo-hlr_10.42.42.2(pid=20289): stdout: | (launched: 2022-12-12_19:41:28.535146) 19:41:32.121185 run osmo-hlr_10.42.42.2(pid=20289): stderr: | �[0;m�[1;31m20221212194128733 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212194128733 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212194128733 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212194128733 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212194128733 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212194128733 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212194128745 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212194128754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212194128754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212194128754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:41:32.167613 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20282): Terminating (SIGTERM) 19:41:32.215101 run iperf3-srv_10.42.42.10(pid=20283): Terminating (SIGTERM) 19:41:32.258209 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20284): Terminating (SIGTERM) 19:41:32.300693 run iperf3-srv_10.42.42.10(pid=20285): Terminating (SIGTERM) 19:41:32.343559 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20288): Terminating (SIGTERM) 19:41:32.386378 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20291): Terminating (SIGTERM) 19:41:32.428895 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20294): Terminating (SIGTERM) 19:41:32.439049 --- ParallelTerminationStrategy: PID 20282 died... 19:41:32.496611 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20282): Terminated: ok {rc=0} 19:41:32.506775 --- ParallelTerminationStrategy: PID 20283 died... 19:41:32.562945 run iperf3-srv_10.42.42.10(pid=20283): Terminated {rc=256} 19:41:32.573462 --- ParallelTerminationStrategy: PID 20284 died... 19:41:32.630063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20284): Terminated: ok {rc=0} 19:41:32.640162 --- ParallelTerminationStrategy: PID 20285 died... 19:41:32.696193 run iperf3-srv_10.42.42.10(pid=20285): Terminated {rc=256} 19:41:32.706578 --- ParallelTerminationStrategy: PID 20288 died... 19:41:32.763250 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20288): Terminated: ok {rc=0} 19:41:32.773464 --- ParallelTerminationStrategy: PID 20291 died... 19:41:32.829599 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20291): Terminated: ok {rc=0} 19:41:32.839990 --- ParallelTerminationStrategy: PID 20294 died... 19:41:32.896695 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20294): Terminated: ok {rc=0} 19:41:32.985128 bus /gobi_0: Setting Powered False 19:41:34.090111 bus /gobi_0: Setting Powered False 19:41:35.199639 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20292): Process ended prematurely: osmo-stp_10.42.42.5(pid=20292) [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20292)]