Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=31712): Process ended prematurely: osmo-stp_10.42.42.5(pid=31712) [trial-2382↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31712)]
Standard Output
---------------------------------------------- trial-2382 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 21:48:47.067797 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:48:47.080570 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 21:48:47.227032 tst ping_idle_ping.py: using LAC 31722 21:48:47.352568 tst ping_idle_ping.py: using RAC 102 21:48:47.475208 tst ping_idle_ping.py: using CellId 31722 21:48:47.596075 tst ping_idle_ping.py: using BVCI 31723 21:48:47.619339 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:48:47.630198 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:48:47.640775 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:48:47.651446 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:48:47.661976 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:48:47.672506 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:48:47.683257 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:48:47.693910 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 21:48:47.989879 tst ping_idle_ping.py:24: start network... 21:48:48.127229 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:48:48.643700 run create_hlr_db(pid=31706): Launched 21:48:48.833268 bus /gobi_6: Setting Powered False 21:48:49.854725 run create_hlr_db(pid=31706): Terminated: ok {rc=0} 21:48:50.269979 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31708): Launched 21:48:50.596301 run osmo-hlr_10.42.42.2(pid=31709): Launched 21:48:50.718404 run osmo-stp_10.42.42.5: Starting osmo-stp 21:48:51.285971 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31711): Launched 21:48:51.613782 run osmo-stp_10.42.42.5(pid=31712): Launched 21:48:51.733332 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:48:52.302364 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31714): Launched 21:48:52.419348 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:48:52.702664 run patchelf(pid=31715): Launched 21:48:52.893848 run osmo-stp_10.42.42.5(pid=31712): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31712)] 21:48:53.033293 run osmo-stp_10.42.42.5(pid=31712): stdout: | (launched: 2022-12-12_21:48:51.452471) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:48:53.173188 run osmo-stp_10.42.42.5(pid=31712): stderr: | �[0;m�[38;5;43m20221212214851647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212214851647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212214851647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212214851648 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212214851650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212214851650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212214851650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:48:53.308235 run osmo-stp_10.42.42.5(pid=31712): stdout: | (launched: 2022-12-12_21:48:51.452471) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:48:53.442209 run osmo-stp_10.42.42.5(pid=31712): stderr: | �[0;m�[38;5;43m20221212214851647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212214851647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212214851647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212214851648 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212214851650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212214851650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212214851650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:48:53.599274 run patchelf(pid=31715): Terminating (SIGINT) 21:48:53.784345 run patchelf(pid=31715): Terminated: ok {rc=0} 21:48:53.817663 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=31712): Process ended prematurely: osmo-stp_10.42.42.5(pid=31712) [trial-2382↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31712)] [trial-2382↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 21:48:53.827118 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 21:48:53.892019 run osmo-hlr_10.42.42.2(pid=31709): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31709)] 21:48:53.944622 run osmo-hlr_10.42.42.2(pid=31709): stdout: | (launched: 2022-12-12_21:48:50.436100) 21:48:53.998066 run osmo-hlr_10.42.42.2(pid=31709): stderr: | �[0;m�[1;31m20221212214850634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212214850634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212214850634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212214850634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212214850634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212214850634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212214850648 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212214850656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212214850656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212214850656 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:48:54.043104 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31708): Terminating (SIGTERM) 21:48:54.085991 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31711): Terminating (SIGTERM) 21:48:54.128561 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31714): Terminating (SIGTERM) 21:48:54.138875 --- ParallelTerminationStrategy: PID 31708 died... 21:48:54.195798 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31708): Terminated: ok {rc=0} 21:48:54.206517 --- ParallelTerminationStrategy: PID 31711 died... 21:48:54.263607 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31711): Terminated: ok {rc=0} 21:48:54.274013 --- ParallelTerminationStrategy: PID 31714 died... 21:48:54.330727 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31714): Terminated: ok {rc=0} 21:48:54.420156 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31712): Process ended prematurely: osmo-stp_10.42.42.5(pid=31712) [trial-2382↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31712)]