Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1255): Process ended prematurely: osmo-stp_10.42.42.5(pid=1255) [trial-2383↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1255)]
Standard Output
---------------------------------------------- trial-2383 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 22:12:38.403011 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:12:38.414146 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:12:38.550289 tst cs_paging_gprs_active.py: using LAC 31845 22:12:38.682422 tst cs_paging_gprs_active.py: using RAC 225 22:12:38.813208 tst cs_paging_gprs_active.py: using CellId 31845 22:12:38.945533 tst cs_paging_gprs_active.py: using BVCI 31846 22:12:38.971188 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:12:38.982501 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:12:38.993546 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:12:39.004700 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:12:39.015876 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:12:39.027141 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:12:39.038745 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:12:39.049759 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:12:39.061200 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:12:39.181182 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:12:39.484337 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:12:39.623602 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:12:39.967033 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1245): Launched 22:12:40.252535 run iperf3-srv_10.42.42.10(pid=1246): Launched 22:12:40.456892 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:12:40.595982 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:12:40.938622 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1247): Launched 22:12:41.223547 run iperf3-srv_10.42.42.10(pid=1248): Launched 22:12:41.427179 tst cs_paging_gprs_active.py:38: start network... 22:12:41.566689 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:12:42.088161 run create_hlr_db(pid=1249): Launched 22:12:42.280521 bus /gobi_6: Setting Powered False 22:12:43.299480 run create_hlr_db(pid=1249): Terminated: ok {rc=0} 22:12:43.714862 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1251): Launched 22:12:44.025170 run osmo-hlr_10.42.42.2(pid=1252): Launched 22:12:44.143980 run osmo-stp_10.42.42.5: Starting osmo-stp 22:12:44.683449 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1254): Launched 22:12:44.995028 run osmo-stp_10.42.42.5(pid=1255): Launched 22:12:45.108534 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:12:45.649542 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1257): Launched 22:12:45.760150 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:12:46.086521 run patchelf(pid=1258): Launched 22:12:46.285941 run osmo-stp_10.42.42.5(pid=1255): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1255)] 22:12:46.432051 run osmo-stp_10.42.42.5(pid=1255): stdout: | (launched: 2022-12-12_22:12:44.841514) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:12:46.580519 run osmo-stp_10.42.42.5(pid=1255): stderr: | �[0;m�[38;5;43m20221212221245012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212221245012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212221245012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212221245013 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212221245015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212221245015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212221245015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:12:46.724637 run osmo-stp_10.42.42.5(pid=1255): stdout: | (launched: 2022-12-12_22:12:44.841514) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:12:46.866938 run osmo-stp_10.42.42.5(pid=1255): stderr: | �[0;m�[38;5;43m20221212221245012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212221245012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212221245012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212221245013 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212221245015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212221245015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212221245015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:12:47.045909 run patchelf(pid=1258): Terminating (SIGINT) 22:12:47.235735 run patchelf(pid=1258): Terminated: ok {rc=0} 22:12:47.269969 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1255): Process ended prematurely: osmo-stp_10.42.42.5(pid=1255) [trial-2383↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1255)] [trial-2383↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 22:12:47.280006 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 22:12:47.344769 run osmo-hlr_10.42.42.2(pid=1252): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1252)] 22:12:47.397057 run osmo-hlr_10.42.42.2(pid=1252): stdout: | (launched: 2022-12-12_22:12:43.872339) 22:12:47.450400 run osmo-hlr_10.42.42.2(pid=1252): stderr: | �[0;m�[1;31m20221212221244051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212221244051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212221244051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212221244051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212221244051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212221244051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212221244064 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212221244072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212221244073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212221244073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:12:47.495706 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1245): Terminating (SIGTERM) 22:12:47.538382 run iperf3-srv_10.42.42.10(pid=1246): Terminating (SIGTERM) 22:12:47.580697 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1247): Terminating (SIGTERM) 22:12:47.623403 run iperf3-srv_10.42.42.10(pid=1248): Terminating (SIGTERM) 22:12:47.666371 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1251): Terminating (SIGTERM) 22:12:47.708369 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1254): Terminating (SIGTERM) 22:12:47.751537 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1257): Terminating (SIGTERM) 22:12:47.761691 --- ParallelTerminationStrategy: PID 1245 died... 22:12:47.818549 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1245): Terminated: ok {rc=0} 22:12:47.828647 --- ParallelTerminationStrategy: PID 1246 died... 22:12:47.884381 run iperf3-srv_10.42.42.10(pid=1246): Terminated {rc=256} 22:12:47.894596 --- ParallelTerminationStrategy: PID 1247 died... 22:12:47.950458 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1247): Terminated: ok {rc=0} 22:12:47.960456 --- ParallelTerminationStrategy: PID 1248 died... 22:12:48.016266 run iperf3-srv_10.42.42.10(pid=1248): Terminated {rc=256} 22:12:48.026270 --- ParallelTerminationStrategy: PID 1251 died... 22:12:48.082005 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1251): Terminated: ok {rc=0} 22:12:48.092283 --- ParallelTerminationStrategy: PID 1254 died... 22:12:48.148334 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1254): Terminated: ok {rc=0} 22:12:48.158744 --- ParallelTerminationStrategy: PID 1257 died... 22:12:48.214932 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1257): Terminated: ok {rc=0} 22:12:48.303416 bus /gobi_0: Setting Powered False 22:12:49.407741 bus /gobi_0: Setting Powered False 22:12:50.518438 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1255): Process ended prematurely: osmo-stp_10.42.42.5(pid=1255) [trial-2383↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1255)]