Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=4304): Process ended prematurely: osmo-stp_10.42.42.5(pid=4304) [trial-2383↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4304)]
Standard Output
---------------------------------------------- trial-2383 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 22:48:18.677440 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:48:18.688091 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:48:18.846884 tst cs_paging_gprs_active.py: using LAC 32034 22:48:18.968814 tst cs_paging_gprs_active.py: using RAC 159 22:48:19.100188 tst cs_paging_gprs_active.py: using CellId 32034 22:48:19.225936 tst cs_paging_gprs_active.py: using BVCI 32035 22:48:19.250871 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:48:19.262385 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:48:19.273777 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:48:19.284934 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:48:19.296080 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:48:19.307268 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:48:19.318505 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:48:19.329609 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:48:19.340802 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:48:19.457399 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:48:19.756134 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:48:19.891410 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:48:20.224011 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4294): Launched 22:48:20.501497 run iperf3-srv_10.42.42.10(pid=4295): Launched 22:48:20.699075 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:48:20.833529 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:48:21.168383 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4296): Launched 22:48:21.445193 run iperf3-srv_10.42.42.10(pid=4297): Launched 22:48:21.643773 tst cs_paging_gprs_active.py:38: start network... 22:48:21.778776 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:48:22.295048 run create_hlr_db(pid=4298): Launched 22:48:22.481192 bus /gobi_6: Setting Powered False 22:48:23.502204 run create_hlr_db(pid=4298): Terminated: ok {rc=0} 22:48:23.909069 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4300): Launched 22:48:24.213150 run osmo-hlr_10.42.42.2(pid=4301): Launched 22:48:24.330854 run osmo-stp_10.42.42.5: Starting osmo-stp 22:48:24.864552 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4303): Launched 22:48:25.168032 run osmo-stp_10.42.42.5(pid=4304): Launched 22:48:25.279023 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:48:25.810185 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4306): Launched 22:48:25.918448 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:48:26.184379 run patchelf(pid=4307): Launched 22:48:26.361729 run osmo-stp_10.42.42.5(pid=4304): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4304)] 22:48:26.491284 run osmo-stp_10.42.42.5(pid=4304): stdout: | (launched: 2022-12-12_22:48:25.018419) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:48:26.621644 run osmo-stp_10.42.42.5(pid=4304): stderr: | �[0;m�[38;5;43m20221212224825189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212224825189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212224825189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212224825190 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212224825190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212224825190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212224825190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:48:26.747511 run osmo-stp_10.42.42.5(pid=4304): stdout: | (launched: 2022-12-12_22:48:25.018419) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:48:26.871858 run osmo-stp_10.42.42.5(pid=4304): stderr: | �[0;m�[38;5;43m20221212224825189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212224825189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212224825189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212224825190 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212224825190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212224825190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212224825190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:48:27.017534 run patchelf(pid=4307): Terminating (SIGINT) 22:48:27.189180 run patchelf(pid=4307): Terminated: ok {rc=0} 22:48:27.220697 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4304): Process ended prematurely: osmo-stp_10.42.42.5(pid=4304) [trial-2383↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4304)] [trial-2383↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 22:48:27.229880 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 22:48:27.289635 run osmo-hlr_10.42.42.2(pid=4301): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4301)] 22:48:27.338751 run osmo-hlr_10.42.42.2(pid=4301): stdout: | (launched: 2022-12-12_22:48:24.063470) 22:48:27.388194 run osmo-hlr_10.42.42.2(pid=4301): stderr: | �[0;m�[1;31m20221212224824238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212224824238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212224824238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212224824239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212224824239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212224824239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212224824251 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212224824262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212224824262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212224824262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:48:27.429722 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4294): Terminating (SIGTERM) 22:48:27.469080 run iperf3-srv_10.42.42.10(pid=4295): Terminating (SIGTERM) 22:48:27.510368 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4296): Terminating (SIGTERM) 22:48:27.549616 run iperf3-srv_10.42.42.10(pid=4297): Terminating (SIGTERM) 22:48:27.588826 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4300): Terminating (SIGTERM) 22:48:27.628211 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4303): Terminating (SIGTERM) 22:48:27.667552 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4306): Terminating (SIGTERM) 22:48:27.676822 --- ParallelTerminationStrategy: PID 4294 died... 22:48:27.729302 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4294): Terminated: ok {rc=0} 22:48:27.739023 --- ParallelTerminationStrategy: PID 4295 died... 22:48:27.790977 run iperf3-srv_10.42.42.10(pid=4295): Terminated {rc=256} 22:48:27.800690 --- ParallelTerminationStrategy: PID 4296 died... 22:48:27.853186 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4296): Terminated: ok {rc=0} 22:48:27.862604 --- ParallelTerminationStrategy: PID 4297 died... 22:48:27.914594 run iperf3-srv_10.42.42.10(pid=4297): Terminated {rc=256} 22:48:27.924205 --- ParallelTerminationStrategy: PID 4300 died... 22:48:27.976277 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4300): Terminated: ok {rc=0} 22:48:27.986141 --- ParallelTerminationStrategy: PID 4303 died... 22:48:28.038279 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4303): Terminated: ok {rc=0} 22:48:28.047823 --- ParallelTerminationStrategy: PID 4306 died... 22:48:28.099807 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4306): Terminated: ok {rc=0} 22:48:28.187120 bus /gobi_0: Setting Powered False 22:48:29.290150 bus /gobi_0: Setting Powered False 22:48:30.398181 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4304): Process ended prematurely: osmo-stp_10.42.42.5(pid=4304) [trial-2383↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4304)]