Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=16099): Process ended prematurely: osmo-stp_10.42.42.5(pid=16099) [trial-2384↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16099)]
Standard Output
---------------------------------------------- trial-2384 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 01:13:45.389182 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:13:45.399896 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 01:13:45.527957 tst cs_paging_gprs_active.py: using LAC 32607 01:13:45.650929 tst cs_paging_gprs_active.py: using RAC 222 01:13:45.774352 tst cs_paging_gprs_active.py: using CellId 32607 01:13:45.922473 tst cs_paging_gprs_active.py: using BVCI 32608 01:13:45.947337 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:13:45.959113 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:13:45.970891 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:13:45.982549 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:13:45.994117 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:13:46.005650 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:13:46.017589 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:13:46.030548 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:13:46.044185 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 01:13:46.183684 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 01:13:46.472257 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:13:46.604769 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:13:46.944028 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16089): Launched 01:13:47.233123 run iperf3-srv_10.42.42.10(pid=16090): Launched 01:13:47.423803 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:13:47.553285 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:13:47.878278 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16091): Launched 01:13:48.148213 run iperf3-srv_10.42.42.10(pid=16092): Launched 01:13:48.338504 tst cs_paging_gprs_active.py:38: start network... 01:13:48.468340 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:13:48.972057 run create_hlr_db(pid=16093): Launched 01:13:49.151264 bus /sierra_2: Setting Powered False 01:13:50.173814 run create_hlr_db(pid=16093): Terminated: ok {rc=0} 01:13:50.590355 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16095): Launched 01:13:50.904123 run osmo-hlr_10.42.42.2(pid=16096): Launched 01:13:51.027006 run osmo-stp_10.42.42.5: Starting osmo-stp 01:13:51.577725 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16098): Launched 01:13:51.894371 run osmo-stp_10.42.42.5(pid=16099): Launched 01:13:52.007751 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:13:52.557585 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16101): Launched 01:13:52.668422 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:13:52.943039 run patchelf(pid=16102): Launched 01:13:53.125315 run osmo-stp_10.42.42.5(pid=16099): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16099)] 01:13:53.257916 run osmo-stp_10.42.42.5(pid=16099): stdout: | (launched: 2022-12-13_01:13:51.736732) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:13:53.390703 run osmo-stp_10.42.42.5(pid=16099): stderr: | �[0;m�[38;5;43m20221213011351908 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011351908 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011351908 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011351909 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011351909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011351909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011351909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:13:53.519155 run osmo-stp_10.42.42.5(pid=16099): stdout: | (launched: 2022-12-13_01:13:51.736732) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:13:53.646471 run osmo-stp_10.42.42.5(pid=16099): stderr: | �[0;m�[38;5;43m20221213011351908 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011351908 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011351908 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011351909 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011351909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011351909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011351909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:13:53.795496 run patchelf(pid=16102): Terminating (SIGINT) 01:13:53.970852 run patchelf(pid=16102): Terminated: ok {rc=0} 01:13:54.002755 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16099): Process ended prematurely: osmo-stp_10.42.42.5(pid=16099) [trial-2384↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16099)] [trial-2384↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 01:13:54.011972 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 01:13:54.072379 run osmo-hlr_10.42.42.2(pid=16096): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16096)] 01:13:54.121779 run osmo-hlr_10.42.42.2(pid=16096): stdout: | (launched: 2022-12-13_01:13:50.748107) 01:13:54.171868 run osmo-hlr_10.42.42.2(pid=16096): stderr: | �[0;m�[1;31m20221213011350926 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213011350926 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213011350926 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213011350926 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213011350926 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213011350927 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213011350939 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213011350947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213011350947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213011350947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:13:54.214473 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16089): Terminating (SIGTERM) 01:13:54.254912 run iperf3-srv_10.42.42.10(pid=16090): Terminating (SIGTERM) 01:13:54.294987 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16091): Terminating (SIGTERM) 01:13:54.334943 run iperf3-srv_10.42.42.10(pid=16092): Terminating (SIGTERM) 01:13:54.374912 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16095): Terminating (SIGTERM) 01:13:54.414744 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16098): Terminating (SIGTERM) 01:13:54.454681 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16101): Terminating (SIGTERM) 01:13:54.463988 --- ParallelTerminationStrategy: PID 16089 died... 01:13:54.517652 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16089): Terminated: ok {rc=0} 01:13:54.527399 --- ParallelTerminationStrategy: PID 16090 died... 01:13:54.580415 run iperf3-srv_10.42.42.10(pid=16090): Terminated {rc=256} 01:13:54.590003 --- ParallelTerminationStrategy: PID 16091 died... 01:13:54.643344 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16091): Terminated: ok {rc=0} 01:13:54.652906 --- ParallelTerminationStrategy: PID 16092 died... 01:13:54.706110 run iperf3-srv_10.42.42.10(pid=16092): Terminated {rc=256} 01:13:54.715719 --- ParallelTerminationStrategy: PID 16095 died... 01:13:54.769492 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16095): Terminated: ok {rc=0} 01:13:54.779179 --- ParallelTerminationStrategy: PID 16098 died... 01:13:54.832458 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16098): Terminated: ok {rc=0} 01:13:54.842101 --- ParallelTerminationStrategy: PID 16101 died... 01:13:54.895480 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16101): Terminated: ok {rc=0} 01:13:54.979636 bus /gobi_0: Setting Powered False 01:13:56.087838 bus /gobi_0: Setting Powered False 01:13:57.196392 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16099): Process ended prematurely: osmo-stp_10.42.42.5(pid=16099) [trial-2384↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16099)]