Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=13968): Process ended prematurely: osmo-stp_10.42.42.5(pid=13968) [trial-2384↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13968)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:50:36.189464 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:50:36.200297 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:50:36.341356 tst cs_paging_gprs_active.py: using LAC 32485 00:50:36.465911 tst cs_paging_gprs_active.py: using RAC 100 00:50:36.589996 tst cs_paging_gprs_active.py: using CellId 32485 00:50:36.714254 tst cs_paging_gprs_active.py: using BVCI 32486 00:50:36.738237 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:50:36.749347 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:50:36.759968 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:50:36.770750 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:50:36.781479 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:50:36.792129 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:50:36.802989 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:50:36.813639 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:50:36.824557 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:50:36.947703 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:50:37.234073 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:50:37.364560 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:50:37.690718 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13958): Launched 00:50:37.961051 run iperf3-srv_10.42.42.10(pid=13959): Launched 00:50:38.154024 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:50:38.285338 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:50:38.611805 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13960): Launched 00:50:38.883343 run iperf3-srv_10.42.42.10(pid=13961): Launched 00:50:39.072805 tst cs_paging_gprs_active.py:38: start network... 00:50:39.202514 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:50:39.709140 run create_hlr_db(pid=13962): Launched 00:50:39.887776 bus /gobi_6: Setting Powered False 00:50:40.910836 run create_hlr_db(pid=13962): Terminated: ok {rc=0} 00:50:41.358011 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13964): Launched 00:50:41.697169 run osmo-hlr_10.42.42.2(pid=13965): Launched 00:50:41.822542 run osmo-stp_10.42.42.5: Starting osmo-stp 00:50:42.409784 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13967): Launched 00:50:42.748100 run osmo-stp_10.42.42.5(pid=13968): Launched 00:50:42.870945 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:50:43.456881 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13970): Launched 00:50:43.576866 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:50:43.870041 run patchelf(pid=13971): Launched 00:50:44.064841 run osmo-stp_10.42.42.5(pid=13968): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13968)] 00:50:44.207570 run osmo-stp_10.42.42.5(pid=13968): stdout: | (launched: 2022-12-13_00:50:42.580754) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:50:44.350495 run osmo-stp_10.42.42.5(pid=13968): stderr: | �[0;m�[38;5;43m20221213005042773 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005042773 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005042774 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005042774 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005042774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005042774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005042775 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:50:44.489219 run osmo-stp_10.42.42.5(pid=13968): stdout: | (launched: 2022-12-13_00:50:42.580754) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:50:44.627090 run osmo-stp_10.42.42.5(pid=13968): stderr: | �[0;m�[38;5;43m20221213005042773 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005042773 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005042774 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005042774 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005042774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005042774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005042775 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:50:44.787493 run patchelf(pid=13971): Terminating (SIGINT) 00:50:44.975604 run patchelf(pid=13971): Terminated: ok {rc=0} 00:50:45.009964 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13968): Process ended prematurely: osmo-stp_10.42.42.5(pid=13968) [trial-2384↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13968)] [trial-2384↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:50:45.019812 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 00:50:45.084379 run osmo-hlr_10.42.42.2(pid=13965): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13965)] 00:50:45.136553 run osmo-hlr_10.42.42.2(pid=13965): stdout: | (launched: 2022-12-13_00:50:41.528847) 00:50:45.189295 run osmo-hlr_10.42.42.2(pid=13965): stderr: | �[0;m�[1;31m20221213005041727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213005041727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213005041727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213005041727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213005041727 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213005041728 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213005041740 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213005041748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213005041748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213005041748 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:50:45.233885 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13958): Terminating (SIGTERM) 00:50:45.276218 run iperf3-srv_10.42.42.10(pid=13959): Terminating (SIGTERM) 00:50:45.318853 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13960): Terminating (SIGTERM) 00:50:45.361314 run iperf3-srv_10.42.42.10(pid=13961): Terminating (SIGTERM) 00:50:45.403792 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13964): Terminating (SIGTERM) 00:50:45.446910 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13967): Terminating (SIGTERM) 00:50:45.489601 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13970): Terminating (SIGTERM) 00:50:45.499464 --- ParallelTerminationStrategy: PID 13958 died... 00:50:45.556109 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13958): Terminated: ok {rc=0} 00:50:45.566403 --- ParallelTerminationStrategy: PID 13959 died... 00:50:45.622896 run iperf3-srv_10.42.42.10(pid=13959): Terminated {rc=256} 00:50:45.633177 --- ParallelTerminationStrategy: PID 13960 died... 00:50:45.689532 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13960): Terminated: ok {rc=0} 00:50:45.699749 --- ParallelTerminationStrategy: PID 13961 died... 00:50:45.755429 run iperf3-srv_10.42.42.10(pid=13961): Terminated {rc=256} 00:50:45.765929 --- ParallelTerminationStrategy: PID 13964 died... 00:50:45.822088 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13964): Terminated: ok {rc=0} 00:50:45.840193 --- ParallelTerminationStrategy: PID 13967 died... 00:50:45.902395 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13967): Terminated: ok {rc=0} 00:50:45.913115 --- ParallelTerminationStrategy: PID 13970 died... 00:50:45.974045 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13970): Terminated: ok {rc=0} 00:50:46.074021 bus /gobi_0: Setting Powered False 00:50:47.200926 bus /gobi_0: Setting Powered False 00:50:48.312898 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13968): Process ended prematurely: osmo-stp_10.42.42.5(pid=13968) [trial-2384↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13968)]