Failed
dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=17080): Process ended prematurely: osmo-stp_10.42.42.5(pid=17080) [trial-2384↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17080)]
Standard Output
---------------------------------------------- trial-2384 dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 01:24:04.259434 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:24:04.272646 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 01:24:04.445129 tst switch_tch_pdch.py: using LAC 32660 01:24:04.576552 tst switch_tch_pdch.py: using RAC 20 01:24:04.708058 tst switch_tch_pdch.py: using CellId 32660 01:24:04.839858 tst switch_tch_pdch.py: using BVCI 32661 01:24:04.866321 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:24:04.879439 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:24:04.893690 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:24:04.908316 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:24:04.921333 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:24:04.936817 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:24:04.951391 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:24:04.964839 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 01:24:05.094514 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 01:24:05.401890 tst switch_tch_pdch.py:51: start network... 01:24:05.542467 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:24:06.108466 run create_hlr_db(pid=17074): Launched 01:24:06.302521 bus /gobi_6: Setting Powered False 01:24:07.324716 run create_hlr_db(pid=17074): Terminated: ok {rc=0} 01:24:07.783100 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17076): Launched 01:24:08.210130 run osmo-hlr_10.42.42.2(pid=17077): Launched 01:24:08.454542 run osmo-stp_10.42.42.5: Starting osmo-stp 01:24:09.042353 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17079): Launched 01:24:09.472910 run osmo-stp_10.42.42.5(pid=17080): Launched 01:24:09.694928 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:24:10.225074 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17084): Launched 01:24:10.331991 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:24:10.597543 run patchelf(pid=17085): Launched 01:24:10.774076 run osmo-stp_10.42.42.5(pid=17080): ERR: Terminated: ERROR {rc=1} [trial-2384↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17080)] 01:24:10.903127 run osmo-stp_10.42.42.5(pid=17080): stdout: | (launched: 2022-12-13_01:24:09.210005) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:24:11.032214 run osmo-stp_10.42.42.5(pid=17080): stderr: | �[0;m�[38;5;43m20221213012409507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213012409507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213012409507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213012409508 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213012409508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213012409508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213012409508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:24:11.156931 run osmo-stp_10.42.42.5(pid=17080): stdout: | (launched: 2022-12-13_01:24:09.210005) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:24:11.280332 run osmo-stp_10.42.42.5(pid=17080): stderr: | �[0;m�[38;5;43m20221213012409507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213012409507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213012409507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213012409508 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213012409508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213012409508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213012409508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:24:11.424147 run patchelf(pid=17085): Terminating (SIGINT) 01:24:11.593873 run patchelf(pid=17085): Terminated: ok {rc=0} 01:24:11.624526 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=17080): Process ended prematurely: osmo-stp_10.42.42.5(pid=17080) [trial-2384↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17080)] [trial-2384↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54] 01:24:11.633355 tst switch_tch_pdch.py:54: Test FAILED (7.4 sec) 01:24:11.692634 run osmo-hlr_10.42.42.2(pid=17077): ERR: Terminated: ERROR {rc=237} [trial-2384↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17077)] 01:24:11.741425 run osmo-hlr_10.42.42.2(pid=17077): stdout: | (launched: 2022-12-13_01:24:07.951299) 01:24:11.790973 run osmo-hlr_10.42.42.2(pid=17077): stderr: | �[0;m�[1;31m20221213012408250 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213012408250 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213012408250 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213012408250 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213012408250 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213012408250 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213012408274 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213012408286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213012408287 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213012408287 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:24:11.833213 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17076): Terminating (SIGTERM) 01:24:11.873147 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17079): Terminating (SIGTERM) 01:24:11.913349 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17084): Terminating (SIGTERM) 01:24:11.922527 --- ParallelTerminationStrategy: PID 17076 died... 01:24:11.975773 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17076): Terminated: ok {rc=0} 01:24:11.985481 --- ParallelTerminationStrategy: PID 17079 died... 01:24:12.038977 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17079): Terminated: ok {rc=0} 01:24:12.048502 --- ParallelTerminationStrategy: PID 17084 died... 01:24:12.101317 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17084): Terminated: ok {rc=0} 01:24:12.190219 bus /gobi_0: Setting Powered False 01:24:13.292790 bus /gobi_0: Setting Powered False 01:24:14.402992 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17080): Process ended prematurely: osmo-stp_10.42.42.5(pid=17080) [trial-2384↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17080)]