Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11957): Process ended prematurely: osmo-stp_10.42.42.5(pid=11957) [trial-2384↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11957)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:33:14.886472 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:33:14.897801 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:33:15.046812 tst cs_paging_gprs_active.py: using LAC 32394 00:33:15.177352 tst cs_paging_gprs_active.py: using RAC 9 00:33:15.308423 tst cs_paging_gprs_active.py: using CellId 32394 00:33:15.438881 tst cs_paging_gprs_active.py: using BVCI 32395 00:33:15.464080 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:33:15.475413 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:33:15.486490 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:33:15.497841 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:33:15.509161 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:33:15.520322 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:33:15.531874 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:33:15.543283 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:33:15.555079 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:33:15.677737 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:33:15.979390 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:33:16.119260 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:33:16.473165 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11947): Launched 00:33:16.772564 run iperf3-srv_10.42.42.10(pid=11948): Launched 00:33:16.978198 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:33:17.144381 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:33:17.487157 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11949): Launched 00:33:17.771713 run iperf3-srv_10.42.42.10(pid=11950): Launched 00:33:17.973851 tst cs_paging_gprs_active.py:38: start network... 00:33:18.112122 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:33:18.631485 run create_hlr_db(pid=11951): Launched 00:33:18.820926 bus /gobi_6: Setting Powered False 00:33:19.843024 run create_hlr_db(pid=11951): Terminated: ok {rc=0} 00:33:20.279720 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11953): Launched 00:33:20.610597 run osmo-hlr_10.42.42.2(pid=11954): Launched 00:33:20.730955 run osmo-stp_10.42.42.5: Starting osmo-stp 00:33:21.303410 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11956): Launched 00:33:21.634256 run osmo-stp_10.42.42.5(pid=11957): Launched 00:33:21.753943 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:33:22.328845 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11959): Launched 00:33:22.447084 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:33:22.734524 run patchelf(pid=11960): Launched 00:33:22.926908 run osmo-stp_10.42.42.5(pid=11957): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11957)] 00:33:23.067528 run osmo-stp_10.42.42.5(pid=11957): stdout: | (launched: 2022-12-13_00:33:21.471087) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:33:23.208628 run osmo-stp_10.42.42.5(pid=11957): stderr: | �[0;m�[38;5;43m20221213003321659 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003321659 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003321659 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003321660 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003321660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003321660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003321660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:33:23.345249 run osmo-stp_10.42.42.5(pid=11957): stdout: | (launched: 2022-12-13_00:33:21.471087) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:33:23.480675 run osmo-stp_10.42.42.5(pid=11957): stderr: | �[0;m�[38;5;43m20221213003321659 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003321659 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003321659 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003321660 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003321660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003321660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003321660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:33:23.638446 run patchelf(pid=11960): Terminating (SIGINT) 00:33:23.823609 run patchelf(pid=11960): Terminated: ok {rc=0} 00:33:23.857781 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11957): Process ended prematurely: osmo-stp_10.42.42.5(pid=11957) [trial-2384↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11957)] [trial-2384↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:33:23.867629 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 00:33:23.931520 run osmo-hlr_10.42.42.2(pid=11954): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11954)] 00:33:23.983657 run osmo-hlr_10.42.42.2(pid=11954): stdout: | (launched: 2022-12-13_00:33:20.447397) 00:33:24.036176 run osmo-hlr_10.42.42.2(pid=11954): stderr: | �[0;m�[1;31m20221213003320642 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213003320642 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213003320642 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213003320643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213003320643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213003320643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213003320655 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213003320664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213003320664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213003320664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:33:24.081669 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11947): Terminating (SIGTERM) 00:33:24.123895 run iperf3-srv_10.42.42.10(pid=11948): Terminating (SIGTERM) 00:33:24.166406 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11949): Terminating (SIGTERM) 00:33:24.208795 run iperf3-srv_10.42.42.10(pid=11950): Terminating (SIGTERM) 00:33:24.251443 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11953): Terminating (SIGTERM) 00:33:24.294191 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11956): Terminating (SIGTERM) 00:33:24.336494 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11959): Terminating (SIGTERM) 00:33:24.346681 --- ParallelTerminationStrategy: PID 11947 died... 00:33:24.403367 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11947): Terminated: ok {rc=0} 00:33:24.413914 --- ParallelTerminationStrategy: PID 11948 died... 00:33:24.469839 run iperf3-srv_10.42.42.10(pid=11948): Terminated {rc=256} 00:33:24.480071 --- ParallelTerminationStrategy: PID 11949 died... 00:33:24.536192 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11949): Terminated: ok {rc=0} 00:33:24.546560 --- ParallelTerminationStrategy: PID 11950 died... 00:33:24.602384 run iperf3-srv_10.42.42.10(pid=11950): Terminated {rc=256} 00:33:24.612794 --- ParallelTerminationStrategy: PID 11953 died... 00:33:24.669206 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11953): Terminated: ok {rc=0} 00:33:24.679327 --- ParallelTerminationStrategy: PID 11956 died... 00:33:24.735704 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11956): Terminated: ok {rc=0} 00:33:24.746342 --- ParallelTerminationStrategy: PID 11959 died... 00:33:24.802377 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11959): Terminated: ok {rc=0} 00:33:24.890514 bus /gobi_0: Setting Powered False 00:33:25.997811 bus /gobi_0: Setting Powered False 00:33:27.105981 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11957): Process ended prematurely: osmo-stp_10.42.42.5(pid=11957) [trial-2384↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11957)]