Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=406): Process ended prematurely: osmo-stp_10.42.42.5(pid=406) [trial-2387↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=406)]
Standard Output
---------------------------------------------- trial-2387 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 09:35:42.889052 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:35:42.899954 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 09:35:43.030886 tst cs_paging_gprs_active.py: using LAC 33068 09:35:43.155623 tst cs_paging_gprs_active.py: using RAC 173 09:35:43.280416 tst cs_paging_gprs_active.py: using CellId 33068 09:35:43.404690 tst cs_paging_gprs_active.py: using BVCI 33069 09:35:43.429078 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:35:43.440185 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:35:43.451107 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:35:43.462061 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:35:43.473185 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:35:43.484212 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:35:43.495457 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:35:43.506484 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 09:35:43.517710 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 09:35:43.633264 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 09:35:43.923597 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:35:44.057245 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:35:44.386724 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=396): Launched 09:35:44.659870 run iperf3-srv_10.42.42.10(pid=397): Launched 09:35:44.855101 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:35:44.988169 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:35:45.317419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=398): Launched 09:35:45.590308 run iperf3-srv_10.42.42.10(pid=399): Launched 09:35:45.785088 tst cs_paging_gprs_active.py:38: start network... 09:35:45.929925 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:35:46.481542 run create_hlr_db(pid=400): Launched 09:35:46.669039 bus /sierra_2: Setting Powered False 09:35:47.676431 run create_hlr_db(pid=400): Terminated: ok {rc=0} 09:35:48.109129 run pcap-recorder_any(filters='host 10.42.42.2')(pid=402): Launched 09:35:48.428070 run osmo-hlr_10.42.42.2(pid=403): Launched 09:35:48.546277 run osmo-stp_10.42.42.5: Starting osmo-stp 09:35:49.099635 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=405): Launched 09:35:49.418201 run osmo-stp_10.42.42.5(pid=406): Launched 09:35:49.534121 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:35:50.090845 run pcap-recorder_any(filters='host 10.42.42.6')(pid=408): Launched 09:35:50.205793 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:35:50.483608 run patchelf(pid=409): Launched 09:35:50.670332 run osmo-stp_10.42.42.5(pid=406): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=406)] 09:35:50.806583 run osmo-stp_10.42.42.5(pid=406): stdout: | (launched: 2022-12-13_09:35:49.262144) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:35:50.943082 run osmo-stp_10.42.42.5(pid=406): stderr: | �[0;m�[38;5;43m20221213093549455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213093549455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213093549456 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213093549456 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213093549456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213093549457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213093549457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:35:51.075424 run osmo-stp_10.42.42.5(pid=406): stdout: | (launched: 2022-12-13_09:35:49.262144) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:35:51.206110 run osmo-stp_10.42.42.5(pid=406): stderr: | �[0;m�[38;5;43m20221213093549455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213093549455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213093549456 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213093549456 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213093549456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213093549457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213093549457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:35:51.358347 run patchelf(pid=409): Terminating (SIGINT) 09:35:51.536613 run patchelf(pid=409): Terminated: ok {rc=0} 09:35:51.569356 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=406): Process ended prematurely: osmo-stp_10.42.42.5(pid=406) [trial-2387↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=406)] [trial-2387↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 09:35:51.579013 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 09:35:51.640989 run osmo-hlr_10.42.42.2(pid=403): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=403)] 09:35:51.691514 run osmo-hlr_10.42.42.2(pid=403): stdout: | (launched: 2022-12-13_09:35:48.272038) 09:35:51.743112 run osmo-hlr_10.42.42.2(pid=403): stderr: | �[0;m�[1;31m20221213093548471 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213093548471 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213093548471 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213093548471 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213093548472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213093548472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213093548485 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213093548495 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213093548495 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213093548495 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:35:51.789306 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=396): Terminating (SIGTERM) 09:35:51.831298 run iperf3-srv_10.42.42.10(pid=397): Terminating (SIGTERM) 09:35:51.876776 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=398): Terminating (SIGTERM) 09:35:51.919387 run iperf3-srv_10.42.42.10(pid=399): Terminating (SIGTERM) 09:35:51.961603 run pcap-recorder_any(filters='host 10.42.42.2')(pid=402): Terminating (SIGTERM) 09:35:52.003928 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=405): Terminating (SIGTERM) 09:35:52.046252 run pcap-recorder_any(filters='host 10.42.42.6')(pid=408): Terminating (SIGTERM) 09:35:52.055985 --- ParallelTerminationStrategy: PID 396 died... 09:35:52.111567 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=396): Terminated: ok {rc=0} 09:35:52.122035 --- ParallelTerminationStrategy: PID 397 died... 09:35:52.177679 run iperf3-srv_10.42.42.10(pid=397): Terminated {rc=256} 09:35:52.187733 --- ParallelTerminationStrategy: PID 398 died... 09:35:52.243285 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=398): Terminated: ok {rc=0} 09:35:52.253314 --- ParallelTerminationStrategy: PID 399 died... 09:35:52.308818 run iperf3-srv_10.42.42.10(pid=399): Terminated {rc=256} 09:35:52.318914 --- ParallelTerminationStrategy: PID 402 died... 09:35:52.374240 run pcap-recorder_any(filters='host 10.42.42.2')(pid=402): Terminated: ok {rc=0} 09:35:52.384282 --- ParallelTerminationStrategy: PID 405 died... 09:35:52.439419 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=405): Terminated: ok {rc=0} 09:35:52.449959 --- ParallelTerminationStrategy: PID 408 died... 09:35:52.505603 run pcap-recorder_any(filters='host 10.42.42.6')(pid=408): Terminated: ok {rc=0} 09:35:52.590470 bus /gobi_0: Setting Powered False 09:35:53.695497 bus /gobi_0: Setting Powered False 09:35:54.802841 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=406): Process ended prematurely: osmo-stp_10.42.42.5(pid=406) [trial-2387↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=406)]