Failed
gprs:sysmo.cs_paging_gprs_active.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=26879): Process ended prematurely: osmo-stp_10.42.42.5(pid=26879) [trial-2387↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26879)]
Standard Output
---------------------------------------------- trial-2387 gprs:sysmo cs_paging_gprs_active.py ---------------------------------------------- 08:38:44.321882 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 08:38:44.332901 tst gprs:sysmo: Using 1 x bts (candidates: 1) 08:38:44.465071 tst cs_paging_gprs_active.py: using LAC 32762 08:38:44.595550 tst cs_paging_gprs_active.py: using RAC 122 08:38:44.725791 tst cs_paging_gprs_active.py: using CellId 32762 08:38:44.859530 tst cs_paging_gprs_active.py: using BVCI 32763 08:38:44.885211 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 08:38:44.896219 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 08:38:44.907204 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 08:38:44.918138 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 08:38:44.929082 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 08:38:44.940142 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 08:38:44.951155 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 08:38:44.962327 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 08:38:44.973396 tst gprs:sysmo: Using 1 x modem (candidates: 4) 08:38:45.097166 tst gprs:sysmo: Using 1 x modem (candidates: 4) 08:38:45.385314 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:38:45.517689 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:38:45.843844 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26598): Launched 08:38:46.162149 run iperf3-srv_10.42.42.10(pid=26599): Launched 08:38:46.364361 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:38:46.500470 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:38:46.909081 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26609): Launched 08:38:47.264373 run iperf3-srv_10.42.42.10(pid=26633): Launched 08:38:47.476868 tst cs_paging_gprs_active.py:38: start network... 08:38:47.623595 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:38:48.260715 run create_hlr_db(pid=26658): Launched 08:38:48.495281 bus /sierra_2: Setting Powered False 08:38:49.472594 run create_hlr_db(pid=26658): Terminated: ok {rc=0} 08:38:49.963721 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26873): Launched 08:38:50.391695 run osmo-hlr_10.42.42.2(pid=26874): Launched 08:38:50.630146 run osmo-stp_10.42.42.5: Starting osmo-stp 08:38:51.286925 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26877): Launched 08:38:51.720503 run osmo-stp_10.42.42.5(pid=26879): Launched 08:38:51.971380 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:38:53.605119 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26881): Launched 08:38:53.729157 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:38:54.055525 run patchelf(pid=26882): Launched 08:38:54.255908 run osmo-stp_10.42.42.5(pid=26879): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26879)] 08:38:54.402472 run osmo-stp_10.42.42.5(pid=26879): stdout: | (launched: 2022-12-13_08:38:51.461089) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:38:54.549853 run osmo-stp_10.42.42.5(pid=26879): stderr: | �[0;m�[38;5;43m20221213083851785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213083851785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213083851786 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213083851786 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213083851786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213083851786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213083851787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:38:54.694209 run osmo-stp_10.42.42.5(pid=26879): stdout: | (launched: 2022-12-13_08:38:51.461089) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:38:54.836657 run osmo-stp_10.42.42.5(pid=26879): stderr: | �[0;m�[38;5;43m20221213083851785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213083851785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213083851786 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213083851786 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213083851786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213083851786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213083851787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:38:55.000555 run patchelf(pid=26882): Terminating (SIGINT) 08:38:55.195040 run patchelf(pid=26882): Terminated: ok {rc=0} 08:38:55.232143 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26879): Process ended prematurely: osmo-stp_10.42.42.5(pid=26879) [trial-2387↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26879)] [trial-2387↪gprs:sysmo↪cs_paging_gprs_active.py:38] 08:38:55.243206 tst cs_paging_gprs_active.py:38: Test FAILED (11.0 sec) 08:38:55.309601 run osmo-hlr_10.42.42.2(pid=26874): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:sysmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26874)] 08:38:55.364490 run osmo-hlr_10.42.42.2(pid=26874): stdout: | (launched: 2022-12-13_08:38:50.127373) 08:38:55.419457 run osmo-hlr_10.42.42.2(pid=26874): stderr: | �[0;m�[1;31m20221213083850472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213083850472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213083850472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213083850472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213083850472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213083850472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213083850490 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:sysmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213083850498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213083850498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213083850498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:38:55.467344 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26598): Terminating (SIGTERM) 08:38:55.518166 run iperf3-srv_10.42.42.10(pid=26599): Terminating (SIGTERM) 08:38:55.564195 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26609): Terminating (SIGTERM) 08:38:55.610506 run iperf3-srv_10.42.42.10(pid=26633): Terminating (SIGTERM) 08:38:55.656739 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26873): Terminating (SIGTERM) 08:38:55.704498 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26877): Terminating (SIGTERM) 08:38:55.749521 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26881): Terminating (SIGTERM) 08:38:55.761747 --- ParallelTerminationStrategy: PID 26598 died... 08:38:55.821589 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26598): Terminated: ok {rc=0} 08:38:55.833670 --- ParallelTerminationStrategy: PID 26599 died... 08:38:55.891166 run iperf3-srv_10.42.42.10(pid=26599): Terminated {rc=256} 08:38:55.902202 --- ParallelTerminationStrategy: PID 26609 died... 08:38:55.960398 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26609): Terminated: ok {rc=0} 08:38:55.971817 --- ParallelTerminationStrategy: PID 26633 died... 08:38:56.031165 run iperf3-srv_10.42.42.10(pid=26633): Terminated {rc=256} 08:38:56.042450 --- ParallelTerminationStrategy: PID 26873 died... 08:38:56.101870 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26873): Terminated: ok {rc=0} 08:38:56.112910 --- ParallelTerminationStrategy: PID 26877 died... 08:38:56.172596 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26877): Terminated: ok {rc=0} 08:38:56.184419 --- ParallelTerminationStrategy: PID 26881 died... 08:38:56.244236 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26881): Terminated: ok {rc=0} 08:38:56.337809 bus /gobi_0: Setting Powered False 08:38:57.450065 bus /gobi_0: Setting Powered False 08:38:58.563686 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26879): Process ended prematurely: osmo-stp_10.42.42.5(pid=26879) [trial-2387↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26879)]