Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=31027): Process ended prematurely: osmo-stp_10.42.42.5(pid=31027) [trial-2387↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31027)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 09:21:49.416179 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:21:49.427371 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:21:49.568309 tst cs_paging_gprs_active.py: using LAC 32993 09:21:49.691201 tst cs_paging_gprs_active.py: using RAC 98 09:21:49.813764 tst cs_paging_gprs_active.py: using CellId 32993 09:21:49.936165 tst cs_paging_gprs_active.py: using BVCI 32994 09:21:49.960488 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:21:49.971752 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:21:49.982744 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:21:49.993836 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:21:50.004721 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:21:50.015661 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:21:50.026834 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:21:50.037770 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:21:50.048893 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:21:50.166801 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:21:50.456282 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:21:50.589782 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:21:50.917214 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31017): Launched 09:21:51.189337 run iperf3-srv_10.42.42.10(pid=31018): Launched 09:21:51.383823 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:21:51.516876 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:21:51.845451 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31019): Launched 09:21:52.117837 run iperf3-srv_10.42.42.10(pid=31020): Launched 09:21:52.312159 tst cs_paging_gprs_active.py:38: start network... 09:21:52.444836 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:21:52.951213 run create_hlr_db(pid=31021): Launched 09:21:53.134215 bus /gobi_6: Setting Powered False 09:21:54.155714 run create_hlr_db(pid=31021): Terminated: ok {rc=0} 09:21:54.553180 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31023): Launched 09:21:54.850103 run osmo-hlr_10.42.42.2(pid=31024): Launched 09:21:54.966113 run osmo-stp_10.42.42.5: Starting osmo-stp 09:21:55.486083 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31026): Launched 09:21:55.783064 run osmo-stp_10.42.42.5(pid=31027): Launched 09:21:55.892140 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:21:56.406201 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31029): Launched 09:21:56.511742 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:21:56.769152 run patchelf(pid=31030): Launched 09:21:56.944168 run osmo-stp_10.42.42.5(pid=31027): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31027)] 09:21:57.071567 run osmo-stp_10.42.42.5(pid=31027): stdout: | (launched: 2022-12-13_09:21:55.637356) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:21:57.199396 run osmo-stp_10.42.42.5(pid=31027): stderr: | �[0;m�[38;5;43m20221213092155807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213092155807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213092155808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213092155808 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213092155810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213092155810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213092155810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:21:57.322879 run osmo-stp_10.42.42.5(pid=31027): stdout: | (launched: 2022-12-13_09:21:55.637356) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:21:57.444860 run osmo-stp_10.42.42.5(pid=31027): stderr: | �[0;m�[38;5;43m20221213092155807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213092155807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213092155808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213092155808 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213092155810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213092155810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213092155810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:21:57.587510 run patchelf(pid=31030): Terminating (SIGINT) 09:21:57.754426 run patchelf(pid=31030): Terminated: ok {rc=0} 09:21:57.785266 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31027): Process ended prematurely: osmo-stp_10.42.42.5(pid=31027) [trial-2387↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31027)] [trial-2387↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 09:21:57.794472 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 09:21:57.854550 run osmo-hlr_10.42.42.2(pid=31024): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31024)] 09:21:57.903669 run osmo-hlr_10.42.42.2(pid=31024): stdout: | (launched: 2022-12-13_09:21:54.704116) 09:21:57.953432 run osmo-hlr_10.42.42.2(pid=31024): stderr: | �[0;m�[1;31m20221213092154879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213092154879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213092154879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213092154879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213092154879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213092154879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213092154892 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213092154900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213092154901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213092154901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:21:57.995845 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31017): Terminating (SIGTERM) 09:21:58.035837 run iperf3-srv_10.42.42.10(pid=31018): Terminating (SIGTERM) 09:21:58.075896 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31019): Terminating (SIGTERM) 09:21:58.115721 run iperf3-srv_10.42.42.10(pid=31020): Terminating (SIGTERM) 09:21:58.155688 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31023): Terminating (SIGTERM) 09:21:58.195756 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31026): Terminating (SIGTERM) 09:21:58.235847 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31029): Terminating (SIGTERM) 09:21:58.245253 --- ParallelTerminationStrategy: PID 31017 died... 09:21:58.298969 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31017): Terminated: ok {rc=0} 09:21:58.308647 --- ParallelTerminationStrategy: PID 31018 died... 09:21:58.361890 run iperf3-srv_10.42.42.10(pid=31018): Terminated {rc=256} 09:21:58.371504 --- ParallelTerminationStrategy: PID 31019 died... 09:21:58.424838 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31019): Terminated: ok {rc=0} 09:21:58.434505 --- ParallelTerminationStrategy: PID 31020 died... 09:21:58.487643 run iperf3-srv_10.42.42.10(pid=31020): Terminated {rc=256} 09:21:58.497163 --- ParallelTerminationStrategy: PID 31023 died... 09:21:58.550106 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31023): Terminated: ok {rc=0} 09:21:58.559708 --- ParallelTerminationStrategy: PID 31026 died... 09:21:58.612824 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31026): Terminated: ok {rc=0} 09:21:58.622532 --- ParallelTerminationStrategy: PID 31029 died... 09:21:58.675651 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31029): Terminated: ok {rc=0} 09:21:58.763328 bus /gobi_0: Setting Powered False 09:21:59.870024 bus /gobi_0: Setting Powered False 09:22:00.990066 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31027): Process ended prematurely: osmo-stp_10.42.42.5(pid=31027) [trial-2387↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31027)]