Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=32315): Process ended prematurely: osmo-stp_10.42.42.5(pid=32315) [trial-2387↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32315)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 09:28:39.932442 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:39.943619 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 09:28:40.080529 tst cs_paging_gprs_active.py: using LAC 33030 09:28:40.204214 tst cs_paging_gprs_active.py: using RAC 135 09:28:40.328005 tst cs_paging_gprs_active.py: using CellId 33030 09:28:40.453457 tst cs_paging_gprs_active.py: using BVCI 33031 09:28:40.477882 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:40.489150 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:40.500202 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:40.511255 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:40.522203 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:40.533269 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:40.544417 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:40.555355 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:28:40.566463 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 09:28:40.683886 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 09:28:40.963859 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:28:41.089348 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:28:41.398478 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32305): Launched 09:28:41.654746 run iperf3-srv_10.42.42.10(pid=32306): Launched 09:28:41.836370 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:28:41.960851 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:28:42.269688 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32307): Launched 09:28:42.526667 run iperf3-srv_10.42.42.10(pid=32308): Launched 09:28:42.708779 tst cs_paging_gprs_active.py:38: start network... 09:28:42.833717 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:28:43.303140 run create_hlr_db(pid=32309): Launched 09:28:43.474759 bus /sierra_2: Setting Powered False 09:28:44.497747 run create_hlr_db(pid=32309): Terminated: ok {rc=0} 09:28:44.920824 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32311): Launched 09:28:45.240667 run osmo-hlr_10.42.42.2(pid=32312): Launched 09:28:45.362475 run osmo-stp_10.42.42.5: Starting osmo-stp 09:28:45.942589 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32314): Launched 09:28:46.272716 run osmo-stp_10.42.42.5(pid=32315): Launched 09:28:46.481396 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:28:47.132738 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32317): Launched 09:28:47.248653 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:28:47.526475 run patchelf(pid=32318): Launched 09:28:47.713442 run osmo-stp_10.42.42.5(pid=32315): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32315)] 09:28:47.850775 run osmo-stp_10.42.42.5(pid=32315): stdout: | (launched: 2022-12-13_09:28:46.109359) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:28:47.987541 run osmo-stp_10.42.42.5(pid=32315): stderr: | �[0;m�[38;5;43m20221213092846459 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213092846459 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213092846460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213092846460 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213092846473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213092846473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213092846473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:28:48.119937 run osmo-stp_10.42.42.5(pid=32315): stdout: | (launched: 2022-12-13_09:28:46.109359) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:28:48.250808 run osmo-stp_10.42.42.5(pid=32315): stderr: | �[0;m�[38;5;43m20221213092846459 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213092846459 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213092846460 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213092846460 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213092846473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213092846473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213092846473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:28:48.403491 run patchelf(pid=32318): Terminating (SIGINT) 09:28:48.582683 run patchelf(pid=32318): Terminated: ok {rc=0} 09:28:48.615543 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32315): Process ended prematurely: osmo-stp_10.42.42.5(pid=32315) [trial-2387↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32315)] [trial-2387↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 09:28:48.625355 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 09:28:48.687749 run osmo-hlr_10.42.42.2(pid=32312): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32312)] 09:28:48.738327 run osmo-hlr_10.42.42.2(pid=32312): stdout: | (launched: 2022-12-13_09:28:45.083432) 09:28:48.790216 run osmo-hlr_10.42.42.2(pid=32312): stderr: | �[0;m�[1;31m20221213092845279 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213092845279 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213092845279 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213092845279 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213092845279 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213092845279 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213092845291 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213092845299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213092845299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213092845300 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:28:48.834400 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32305): Terminating (SIGTERM) 09:28:48.875755 run iperf3-srv_10.42.42.10(pid=32306): Terminating (SIGTERM) 09:28:48.917136 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32307): Terminating (SIGTERM) 09:28:48.958206 run iperf3-srv_10.42.42.10(pid=32308): Terminating (SIGTERM) 09:28:48.999476 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32311): Terminating (SIGTERM) 09:28:49.040634 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32314): Terminating (SIGTERM) 09:28:49.081923 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32317): Terminating (SIGTERM) 09:28:49.091615 --- ParallelTerminationStrategy: PID 32305 died... 09:28:49.146887 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32305): Terminated: ok {rc=0} 09:28:49.157123 --- ParallelTerminationStrategy: PID 32306 died... 09:28:49.211920 run iperf3-srv_10.42.42.10(pid=32306): Terminated {rc=256} 09:28:49.221994 --- ParallelTerminationStrategy: PID 32307 died... 09:28:49.276806 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32307): Terminated: ok {rc=0} 09:28:49.286843 --- ParallelTerminationStrategy: PID 32308 died... 09:28:49.341529 run iperf3-srv_10.42.42.10(pid=32308): Terminated {rc=256} 09:28:49.351534 --- ParallelTerminationStrategy: PID 32311 died... 09:28:49.406310 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32311): Terminated: ok {rc=0} 09:28:49.416298 --- ParallelTerminationStrategy: PID 32314 died... 09:28:49.471263 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32314): Terminated: ok {rc=0} 09:28:49.481421 --- ParallelTerminationStrategy: PID 32317 died... 09:28:49.536615 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32317): Terminated: ok {rc=0} 09:28:49.621044 bus /gobi_0: Setting Powered False 09:28:50.725064 bus /gobi_0: Setting Powered False 09:28:51.832196 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32315): Process ended prematurely: osmo-stp_10.42.42.5(pid=32315) [trial-2387↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32315)]