Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=17128): Process ended prematurely: osmo-stp_10.42.42.5(pid=17128) [trial-2389↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17128)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 11:58:31.580779 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:58:31.595508 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:58:31.801659 tst cs_paging_gprs_active.py: using LAC 33787 11:58:31.965644 tst cs_paging_gprs_active.py: using RAC 127 11:58:32.098116 tst cs_paging_gprs_active.py: using CellId 33787 11:58:32.236467 tst cs_paging_gprs_active.py: using BVCI 33788 11:58:32.263728 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:58:32.276185 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:58:32.288535 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:58:32.300917 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:58:32.314637 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:58:32.328821 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:58:32.342366 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:58:32.356019 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:58:32.368542 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:58:32.486582 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:58:32.789179 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:58:32.928288 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:58:33.274676 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17118): Launched 11:58:33.561490 run iperf3-srv_10.42.42.10(pid=17119): Launched 11:58:33.765658 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:58:33.904269 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:58:34.250646 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17120): Launched 11:58:34.537360 run iperf3-srv_10.42.42.10(pid=17121): Launched 11:58:34.741496 tst cs_paging_gprs_active.py:38: start network... 11:58:34.880630 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:58:35.406889 run create_hlr_db(pid=17122): Launched 11:58:35.599967 bus /gobi_6: Setting Powered False 11:58:36.620062 run create_hlr_db(pid=17122): Terminated: ok {rc=0} 11:58:37.064574 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17124): Launched 11:58:37.399299 run osmo-hlr_10.42.42.2(pid=17125): Launched 11:58:37.521205 run osmo-stp_10.42.42.5: Starting osmo-stp 11:58:38.097875 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17127): Launched 11:58:38.431755 run osmo-stp_10.42.42.5(pid=17128): Launched 11:58:38.552183 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:58:39.131864 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17130): Launched 11:58:39.250925 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:58:39.541765 run patchelf(pid=17131): Launched 11:58:39.736144 run osmo-stp_10.42.42.5(pid=17128): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17128)] 11:58:39.878530 run osmo-stp_10.42.42.5(pid=17128): stdout: | (launched: 2022-12-13_11:58:38.267001) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:58:40.021459 run osmo-stp_10.42.42.5(pid=17128): stderr: | �[0;m�[38;5;43m20221213115838458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213115838458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213115838458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213115838459 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213115838459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213115838459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213115838459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:58:40.159097 run osmo-stp_10.42.42.5(pid=17128): stdout: | (launched: 2022-12-13_11:58:38.267001) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:58:40.295745 run osmo-stp_10.42.42.5(pid=17128): stderr: | �[0;m�[38;5;43m20221213115838458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213115838458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213115838458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213115838459 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213115838459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213115838459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213115838459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:58:40.454980 run patchelf(pid=17131): Terminating (SIGINT) 11:58:40.641366 run patchelf(pid=17131): Terminated: ok {rc=0} 11:58:40.675538 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17128): Process ended prematurely: osmo-stp_10.42.42.5(pid=17128) [trial-2389↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17128)] [trial-2389↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 11:58:40.685701 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 11:58:40.750067 run osmo-hlr_10.42.42.2(pid=17125): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17125)] 11:58:40.802271 run osmo-hlr_10.42.42.2(pid=17125): stdout: | (launched: 2022-12-13_11:58:37.234438) 11:58:40.855023 run osmo-hlr_10.42.42.2(pid=17125): stderr: | �[0;m�[1;31m20221213115837432 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213115837432 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213115837432 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213115837432 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213115837432 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213115837433 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213115837448 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213115837456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213115837456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213115837456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:58:40.900110 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17118): Terminating (SIGTERM) 11:58:40.942460 run iperf3-srv_10.42.42.10(pid=17119): Terminating (SIGTERM) 11:58:40.984672 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17120): Terminating (SIGTERM) 11:58:41.026891 run iperf3-srv_10.42.42.10(pid=17121): Terminating (SIGTERM) 11:58:41.069235 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17124): Terminating (SIGTERM) 11:58:41.111639 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17127): Terminating (SIGTERM) 11:58:41.153976 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17130): Terminating (SIGTERM) 11:58:41.163609 --- ParallelTerminationStrategy: PID 17118 died... 11:58:41.220795 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17118): Terminated: ok {rc=0} 11:58:41.230919 --- ParallelTerminationStrategy: PID 17119 died... 11:58:41.287434 run iperf3-srv_10.42.42.10(pid=17119): Terminated {rc=256} 11:58:41.297841 --- ParallelTerminationStrategy: PID 17120 died... 11:58:41.354499 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17120): Terminated: ok {rc=0} 11:58:41.364510 --- ParallelTerminationStrategy: PID 17121 died... 11:58:41.420904 run iperf3-srv_10.42.42.10(pid=17121): Terminated {rc=256} 11:58:41.430925 --- ParallelTerminationStrategy: PID 17124 died... 11:58:41.487945 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17124): Terminated: ok {rc=0} 11:58:41.498085 --- ParallelTerminationStrategy: PID 17127 died... 11:58:41.555112 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17127): Terminated: ok {rc=0} 11:58:41.565362 --- ParallelTerminationStrategy: PID 17130 died... 11:58:41.622357 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17130): Terminated: ok {rc=0} 11:58:41.710594 bus /gobi_0: Setting Powered False 11:58:42.819195 bus /gobi_0: Setting Powered False 11:58:43.928825 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17128): Process ended prematurely: osmo-stp_10.42.42.5(pid=17128) [trial-2389↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17128)]