Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=28986): Process ended prematurely: osmo-stp_10.42.42.5(pid=28986) [trial-2390↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28986)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 13:57:38.229139 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:38.239777 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 13:57:38.373700 tst cs_paging_gprs_active.py: using LAC 34413 13:57:38.492666 tst cs_paging_gprs_active.py: using RAC 243 13:57:38.621607 tst cs_paging_gprs_active.py: using CellId 34413 13:57:38.751399 tst cs_paging_gprs_active.py: using BVCI 34414 13:57:38.776825 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:38.788353 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:38.799738 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:38.811153 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:38.822512 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:38.833908 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:38.845461 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:38.856682 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:57:38.868162 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 13:57:38.987661 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 13:57:39.276777 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:57:39.403889 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:57:39.720396 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28976): Launched 13:57:39.985133 run iperf3-srv_10.42.42.10(pid=28977): Launched 13:57:40.170635 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:57:40.297096 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:57:40.615648 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28978): Launched 13:57:40.881122 run iperf3-srv_10.42.42.10(pid=28979): Launched 13:57:41.066410 tst cs_paging_gprs_active.py:38: start network... 13:57:41.193300 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:57:41.684258 run create_hlr_db(pid=28980): Launched 13:57:41.858476 bus /sierra_2: Setting Powered False 13:57:42.881369 run create_hlr_db(pid=28980): Terminated: ok {rc=0} 13:57:43.317583 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28982): Launched 13:57:43.645869 run osmo-hlr_10.42.42.2(pid=28983): Launched 13:57:43.766493 run osmo-stp_10.42.42.5: Starting osmo-stp 13:57:44.335556 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28985): Launched 13:57:44.665594 run osmo-stp_10.42.42.5(pid=28986): Launched 13:57:44.784769 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:57:45.357052 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28988): Launched 13:57:45.466160 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:57:45.736545 run patchelf(pid=28989): Launched 13:57:45.925991 run osmo-stp_10.42.42.5(pid=28986): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28986)] 13:57:46.063126 run osmo-stp_10.42.42.5(pid=28986): stdout: | (launched: 2022-12-13_13:57:44.502657) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:57:46.198044 run osmo-stp_10.42.42.5(pid=28986): stderr: | �[0;m�[38;5;43m20221213135744692 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213135744693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213135744693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213135744693 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213135744694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213135744694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213135744694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:57:46.326461 run osmo-stp_10.42.42.5(pid=28986): stdout: | (launched: 2022-12-13_13:57:44.502657) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:57:46.454148 run osmo-stp_10.42.42.5(pid=28986): stderr: | �[0;m�[38;5;43m20221213135744692 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213135744693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213135744693 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213135744693 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213135744694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213135744694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213135744694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:57:46.602781 run patchelf(pid=28989): Terminating (SIGINT) 13:57:46.778271 run patchelf(pid=28989): Terminated: ok {rc=0} 13:57:46.811391 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28986): Process ended prematurely: osmo-stp_10.42.42.5(pid=28986) [trial-2390↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28986)] [trial-2390↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 13:57:46.821736 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 13:57:46.883975 run osmo-hlr_10.42.42.2(pid=28983): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28983)] 13:57:46.934262 run osmo-hlr_10.42.42.2(pid=28983): stdout: | (launched: 2022-12-13_13:57:43.483512) 13:57:46.985223 run osmo-hlr_10.42.42.2(pid=28983): stderr: | �[0;m�[1;31m20221213135743680 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213135743680 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213135743680 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213135743680 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213135743680 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213135743680 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213135743693 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213135743701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213135743702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213135743702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:57:47.028296 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28976): Terminating (SIGTERM) 13:57:47.068866 run iperf3-srv_10.42.42.10(pid=28977): Terminating (SIGTERM) 13:57:47.109555 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28978): Terminating (SIGTERM) 13:57:47.150486 run iperf3-srv_10.42.42.10(pid=28979): Terminating (SIGTERM) 13:57:47.193267 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28982): Terminating (SIGTERM) 13:57:47.234335 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28985): Terminating (SIGTERM) 13:57:47.276809 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28988): Terminating (SIGTERM) 13:57:47.286880 --- ParallelTerminationStrategy: PID 28976 died... 13:57:47.341897 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28976): Terminated: ok {rc=0} 13:57:47.351579 --- ParallelTerminationStrategy: PID 28977 died... 13:57:47.404349 run iperf3-srv_10.42.42.10(pid=28977): Terminated {rc=256} 13:57:47.414004 --- ParallelTerminationStrategy: PID 28978 died... 13:57:47.466986 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28978): Terminated: ok {rc=0} 13:57:47.476569 --- ParallelTerminationStrategy: PID 28979 died... 13:57:47.529310 run iperf3-srv_10.42.42.10(pid=28979): Terminated {rc=256} 13:57:47.539307 --- ParallelTerminationStrategy: PID 28982 died... 13:57:47.592218 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28982): Terminated: ok {rc=0} 13:57:47.602002 --- ParallelTerminationStrategy: PID 28985 died... 13:57:47.654726 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28985): Terminated: ok {rc=0} 13:57:47.664405 --- ParallelTerminationStrategy: PID 28988 died... 13:57:47.717590 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28988): Terminated: ok {rc=0} 13:57:47.805498 bus /gobi_0: Setting Powered False 13:57:48.908698 bus /gobi_0: Setting Powered False 13:57:50.020011 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28986): Process ended prematurely: osmo-stp_10.42.42.5(pid=28986) [trial-2390↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28986)]