Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1570): Process ended prematurely: osmo-stp_10.42.42.5(pid=1570) [trial-2391↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1570)]
Standard Output
---------------------------------------------- trial-2391 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 15:44:54.434618 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:44:54.445623 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 15:44:54.572795 tst cs_paging_gprs_active.py: using LAC 34611 15:44:54.697489 tst cs_paging_gprs_active.py: using RAC 186 15:44:54.821152 tst cs_paging_gprs_active.py: using CellId 34611 15:44:54.945687 tst cs_paging_gprs_active.py: using BVCI 34612 15:44:54.970255 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:44:54.981399 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:44:54.992207 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:44:55.002865 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:44:55.014272 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:44:55.025519 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:44:55.036881 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:44:55.048179 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:44:55.059479 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 15:44:55.183892 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 15:44:55.475406 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:44:55.607750 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:44:55.939487 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1560): Launched 15:44:56.216757 run iperf3-srv_10.42.42.10(pid=1561): Launched 15:44:56.411702 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:44:56.544409 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:44:56.877179 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1562): Launched 15:44:57.152296 run iperf3-srv_10.42.42.10(pid=1563): Launched 15:44:57.347029 tst cs_paging_gprs_active.py:38: start network... 15:44:57.479996 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:44:57.982269 run create_hlr_db(pid=1564): Launched 15:44:58.164666 bus /gobi_6: Setting Powered False 15:44:59.186263 run create_hlr_db(pid=1564): Terminated: ok {rc=0} 15:44:59.639637 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1566): Launched 15:44:59.980283 run osmo-hlr_10.42.42.2(pid=1567): Launched 15:45:00.108480 run osmo-stp_10.42.42.5: Starting osmo-stp 15:45:00.699939 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1569): Launched 15:45:01.199496 run osmo-stp_10.42.42.5(pid=1570): Launched 15:45:01.344354 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:45:01.965987 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1575): Launched 15:45:02.083980 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:45:02.385199 run patchelf(pid=1576): Launched 15:45:02.583822 run osmo-stp_10.42.42.5(pid=1570): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1570)] 15:45:02.728592 run osmo-stp_10.42.42.5(pid=1570): stdout: | (launched: 2022-12-13_15:45:00.880820) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:45:02.873814 run osmo-stp_10.42.42.5(pid=1570): stderr: | �[0;m�[38;5;43m20221213154501103 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213154501103 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213154501104 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213154501105 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213154501108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213154501108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213154501108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:45:03.014098 run osmo-stp_10.42.42.5(pid=1570): stdout: | (launched: 2022-12-13_15:45:00.880820) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:45:03.152778 run osmo-stp_10.42.42.5(pid=1570): stderr: | �[0;m�[38;5;43m20221213154501103 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213154501103 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213154501104 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213154501105 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213154501108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213154501108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213154501108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:45:03.314759 run patchelf(pid=1576): Terminating (SIGINT) 15:45:03.504623 run patchelf(pid=1576): Terminated: ok {rc=0} 15:45:03.539555 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1570): Process ended prematurely: osmo-stp_10.42.42.5(pid=1570) [trial-2391↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1570)] [trial-2391↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 15:45:03.549705 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 15:45:03.614147 run osmo-hlr_10.42.42.2(pid=1567): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1567)] 15:45:03.666754 run osmo-hlr_10.42.42.2(pid=1567): stdout: | (launched: 2022-12-13_15:44:59.811727) 15:45:03.720061 run osmo-hlr_10.42.42.2(pid=1567): stderr: | �[0;m�[1;31m20221213154500012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213154500012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213154500012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213154500012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213154500013 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213154500013 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213154500025 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213154500034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213154500034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213154500034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:45:03.765593 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1560): Terminating (SIGTERM) 15:45:03.808607 run iperf3-srv_10.42.42.10(pid=1561): Terminating (SIGTERM) 15:45:03.853163 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1562): Terminating (SIGTERM) 15:45:03.896735 run iperf3-srv_10.42.42.10(pid=1563): Terminating (SIGTERM) 15:45:03.939814 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1566): Terminating (SIGTERM) 15:45:03.982839 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1569): Terminating (SIGTERM) 15:45:04.025434 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1575): Terminating (SIGTERM) 15:45:04.035023 --- ParallelTerminationStrategy: PID 1560 died... 15:45:04.092000 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1560): Terminated: ok {rc=0} 15:45:04.102143 --- ParallelTerminationStrategy: PID 1561 died... 15:45:04.158378 run iperf3-srv_10.42.42.10(pid=1561): Terminated {rc=256} 15:45:04.168398 --- ParallelTerminationStrategy: PID 1562 died... 15:45:04.224770 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1562): Terminated: ok {rc=0} 15:45:04.235019 --- ParallelTerminationStrategy: PID 1563 died... 15:45:04.291283 run iperf3-srv_10.42.42.10(pid=1563): Terminated {rc=256} 15:45:04.301548 --- ParallelTerminationStrategy: PID 1566 died... 15:45:04.357635 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1566): Terminated: ok {rc=0} 15:45:04.367824 --- ParallelTerminationStrategy: PID 1569 died... 15:45:04.424441 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1569): Terminated: ok {rc=0} 15:45:04.434653 --- ParallelTerminationStrategy: PID 1575 died... 15:45:04.491833 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1575): Terminated: ok {rc=0} 15:45:04.580735 bus /gobi_0: Setting Powered False 15:45:05.689411 bus /gobi_0: Setting Powered False 15:45:06.799057 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1570): Process ended prematurely: osmo-stp_10.42.42.5(pid=1570) [trial-2391↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1570)]