Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=18907): Process ended prematurely: osmo-stp_10.42.42.5(pid=18907) [trial-2393↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18907)]
Standard Output
---------------------------------------------- trial-2393 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 18:47:25.380428 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:47:25.391481 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 18:47:25.536109 tst cs_paging_gprs_active.py: using LAC 35543 18:47:25.659172 tst cs_paging_gprs_active.py: using RAC 98 18:47:25.782344 tst cs_paging_gprs_active.py: using CellId 35543 18:47:25.900608 tst cs_paging_gprs_active.py: using BVCI 35544 18:47:25.924076 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:47:25.935034 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:47:25.945729 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:47:25.956315 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:47:25.967340 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:47:25.978224 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:47:25.989158 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:47:25.999868 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:47:26.010855 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:47:26.132552 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:47:26.415519 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:47:26.543370 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:47:26.860428 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18897): Launched 18:47:27.123197 run iperf3-srv_10.42.42.10(pid=18898): Launched 18:47:27.310065 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:47:27.437131 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:47:27.753197 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18899): Launched 18:47:28.015847 run iperf3-srv_10.42.42.10(pid=18900): Launched 18:47:28.202452 tst cs_paging_gprs_active.py:38: start network... 18:47:28.329761 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:47:28.819046 run create_hlr_db(pid=18901): Launched 18:47:28.994929 bus /gobi_6: Setting Powered False 18:47:30.017238 run create_hlr_db(pid=18901): Terminated: ok {rc=0} 18:47:30.455259 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18903): Launched 18:47:30.787204 run osmo-hlr_10.42.42.2(pid=18904): Launched 18:47:30.997363 run osmo-stp_10.42.42.5: Starting osmo-stp 18:47:31.601658 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18906): Launched 18:47:32.055467 run osmo-stp_10.42.42.5(pid=18907): Launched 18:47:32.209640 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:47:32.787437 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18909): Launched 18:47:32.906008 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:47:33.194659 run patchelf(pid=18910): Launched 18:47:33.388334 run osmo-stp_10.42.42.5(pid=18907): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18907)] 18:47:33.529143 run osmo-stp_10.42.42.5(pid=18907): stdout: | (launched: 2022-12-13_18:47:31.761410) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:47:33.670156 run osmo-stp_10.42.42.5(pid=18907): stderr: | �[0;m�[38;5;43m20221213184731976 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184731976 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184731977 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184731977 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184731978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184731978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184731978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:47:33.806416 run osmo-stp_10.42.42.5(pid=18907): stdout: | (launched: 2022-12-13_18:47:31.761410) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:47:33.941695 run osmo-stp_10.42.42.5(pid=18907): stderr: | �[0;m�[38;5;43m20221213184731976 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184731976 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184731977 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184731977 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184731978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184731978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184731978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:47:34.099012 run patchelf(pid=18910): Terminating (SIGINT) 18:47:34.283646 run patchelf(pid=18910): Terminated: ok {rc=0} 18:47:34.317997 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18907): Process ended prematurely: osmo-stp_10.42.42.5(pid=18907) [trial-2393↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18907)] [trial-2393↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 18:47:34.328016 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 18:47:34.392564 run osmo-hlr_10.42.42.2(pid=18904): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18904)] 18:47:34.444750 run osmo-hlr_10.42.42.2(pid=18904): stdout: | (launched: 2022-12-13_18:47:30.623264) 18:47:34.497638 run osmo-hlr_10.42.42.2(pid=18904): stderr: | �[0;m�[1;31m20221213184730820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213184730820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213184730820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213184730820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213184730820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213184730820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213184730834 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213184730855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213184730855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213184730856 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:47:34.543322 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18897): Terminating (SIGTERM) 18:47:34.586064 run iperf3-srv_10.42.42.10(pid=18898): Terminating (SIGTERM) 18:47:34.629105 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18899): Terminating (SIGTERM) 18:47:34.671817 run iperf3-srv_10.42.42.10(pid=18900): Terminating (SIGTERM) 18:47:34.715011 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18903): Terminating (SIGTERM) 18:47:34.757917 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18906): Terminating (SIGTERM) 18:47:34.800892 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18909): Terminating (SIGTERM) 18:47:34.810349 --- ParallelTerminationStrategy: PID 18897 died... 18:47:34.868088 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18897): Terminated: ok {rc=0} 18:47:34.878533 --- ParallelTerminationStrategy: PID 18898 died... 18:47:34.935690 run iperf3-srv_10.42.42.10(pid=18898): Terminated {rc=256} 18:47:34.945987 --- ParallelTerminationStrategy: PID 18899 died... 18:47:35.003126 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18899): Terminated: ok {rc=0} 18:47:35.013468 --- ParallelTerminationStrategy: PID 18900 died... 18:47:35.070689 run iperf3-srv_10.42.42.10(pid=18900): Terminated {rc=256} 18:47:35.081072 --- ParallelTerminationStrategy: PID 18903 died... 18:47:35.138222 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18903): Terminated: ok {rc=0} 18:47:35.148543 --- ParallelTerminationStrategy: PID 18906 died... 18:47:35.205628 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18906): Terminated: ok {rc=0} 18:47:35.215963 --- ParallelTerminationStrategy: PID 18909 died... 18:47:35.272504 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18909): Terminated: ok {rc=0} 18:47:35.358310 bus /gobi_0: Setting Powered False 18:47:36.463689 bus /gobi_0: Setting Powered False 18:47:37.571586 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18907): Process ended prematurely: osmo-stp_10.42.42.5(pid=18907) [trial-2393↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18907)]