Failed
gprs:trx-lms+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31335): Process ended prematurely: osmo-stp_10.42.42.5(pid=31335) [trial-2394↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31335)]
Standard Output
---------------------------------------------- trial-2394 gprs:trx-lms+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 20:58:36.770151 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:58:36.782721 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:58:36.948841 tst ping_idle_ping.py: using LAC 36234 20:58:37.076636 tst ping_idle_ping.py: using RAC 24 20:58:37.201117 tst ping_idle_ping.py: using CellId 36234 20:58:37.328135 tst ping_idle_ping.py: using BVCI 36235 20:58:37.352573 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:58:37.363954 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:58:37.375202 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:58:37.386396 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:58:37.397515 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:58:37.409438 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:58:37.420785 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:58:37.431955 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:58:37.722229 tst ping_idle_ping.py:24: start network... 20:58:37.854210 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:58:38.369139 run create_hlr_db(pid=31329): Launched 20:58:38.554575 bus /gobi_6: Setting Powered False 20:58:39.575683 run create_hlr_db(pid=31329): Terminated: ok {rc=0} 20:58:39.977938 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31331): Launched 20:58:40.275852 run osmo-hlr_10.42.42.2(pid=31332): Launched 20:58:40.392821 run osmo-stp_10.42.42.5: Starting osmo-stp 20:58:40.917507 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31334): Launched 20:58:41.214292 run osmo-stp_10.42.42.5(pid=31335): Launched 20:58:41.322502 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:58:41.840071 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31337): Launched 20:58:41.945841 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:58:42.205104 run patchelf(pid=31338): Launched 20:58:42.378826 run osmo-stp_10.42.42.5(pid=31335): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31335)] 20:58:42.505738 run osmo-stp_10.42.42.5(pid=31335): stdout: | (launched: 2022-12-13_20:58:41.067620) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:58:42.632601 run osmo-stp_10.42.42.5(pid=31335): stderr: | �[0;m�[38;5;43m20221213205841234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213205841234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213205841234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213205841235 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213205841235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213205841235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213205841235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:58:42.755803 run osmo-stp_10.42.42.5(pid=31335): stdout: | (launched: 2022-12-13_20:58:41.067620) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:58:42.878208 run osmo-stp_10.42.42.5(pid=31335): stderr: | �[0;m�[38;5;43m20221213205841234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213205841234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213205841234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213205841235 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213205841235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213205841235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213205841235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:58:43.020444 run patchelf(pid=31338): Terminating (SIGINT) 20:58:43.188367 run patchelf(pid=31338): Terminated: ok {rc=0} 20:58:43.218901 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=31335): Process ended prematurely: osmo-stp_10.42.42.5(pid=31335) [trial-2394↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31335)] [trial-2394↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 20:58:43.227533 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 20:58:43.288492 run osmo-hlr_10.42.42.2(pid=31332): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31332)] 20:58:43.338001 run osmo-hlr_10.42.42.2(pid=31332): stdout: | (launched: 2022-12-13_20:58:40.128883) 20:58:43.387954 run osmo-hlr_10.42.42.2(pid=31332): stderr: | �[0;m�[1;31m20221213205840303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213205840303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213205840303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213205840303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213205840303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213205840303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213205840316 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:trx-lms+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213205840326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213205840326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213205840326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:58:43.430481 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31331): Terminating (SIGTERM) 20:58:43.470580 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31334): Terminating (SIGTERM) 20:58:43.510661 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31337): Terminating (SIGTERM) 20:58:43.519988 --- ParallelTerminationStrategy: PID 31331 died... 20:58:43.574422 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31331): Terminated: ok {rc=0} 20:58:43.584243 --- ParallelTerminationStrategy: PID 31334 died... 20:58:43.638051 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31334): Terminated: ok {rc=0} 20:58:43.647705 --- ParallelTerminationStrategy: PID 31337 died... 20:58:43.701594 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31337): Terminated: ok {rc=0} 20:58:43.785229 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31335): Process ended prematurely: osmo-stp_10.42.42.5(pid=31335) [trial-2394↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31335)]