Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 69 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=4557): Process ended prematurely: osmo-stp_10.42.42.5(pid=4557) [trial-2399↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4557)]

Standard Output

----------------------------------------------
trial-2399 gprs:sysmo ping.py
----------------------------------------------
03:41:25.883713 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
03:41:25.895152 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
03:41:26.076534 tst                          ping.py: using LAC 38297
03:41:26.198578 tst                          ping.py: using RAC 47
03:41:26.315618 tst                          ping.py: using CellId 38297
03:41:26.437216 tst                          ping.py: using BVCI 38298
03:41:26.460212 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
03:41:26.470908 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
03:41:26.481503 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
03:41:26.491971 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
03:41:26.502621 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
03:41:26.513422 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
03:41:26.524091 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
03:41:26.534695 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
03:41:26.811417 tst                       ping.py:19: start network...
03:41:26.936247 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
03:41:27.422233 run          create_hlr_db(pid=4551): Launched
03:41:27.595592 bus                          /gobi_6: Setting Powered False
03:41:28.616812 run          create_hlr_db(pid=4551): Terminated: ok {rc=0}
03:41:29.048800 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4553): Launched
03:41:29.374833 run    osmo-hlr_10.42.42.2(pid=4554): Launched
03:41:29.494516 run              osmo-stp_10.42.42.5: Starting osmo-stp
03:41:30.050218 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4556): Launched
03:41:30.351334 run    osmo-stp_10.42.42.5(pid=4557): Launched
03:41:30.459021 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
03:41:31.052015 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4559): Launched
03:41:31.191211 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
03:41:31.511912 run               patchelf(pid=4560): Launched
03:41:31.691371 run    osmo-stp_10.42.42.5(pid=4557): ERR: Terminated: ERROR {rc=1}  [trial-2399↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4557)]
03:41:31.822810 run    osmo-stp_10.42.42.5(pid=4557): stdout: 
| (launched: 2022-12-14_03:41:30.202460)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:41:31.955098 run    osmo-stp_10.42.42.5(pid=4557): stderr: 
| �[0;m�[38;5;43m20221214034130375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214034130375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214034130375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214034130376 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214034130378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214034130378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214034130378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:41:32.082066 run    osmo-stp_10.42.42.5(pid=4557): stdout: 
| (launched: 2022-12-14_03:41:30.202460)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:41:32.207488 run    osmo-stp_10.42.42.5(pid=4557): stderr: 
| �[0;m�[38;5;43m20221214034130375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214034130375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214034130375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214034130376 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214034130378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214034130378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214034130378 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:41:32.353226 run               patchelf(pid=4560): Terminating (SIGINT)
03:41:32.522238 run               patchelf(pid=4560): Terminated: ok {rc=0}
03:41:32.553115 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=4557): Process ended prematurely: osmo-stp_10.42.42.5(pid=4557) [trial-2399↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4557)]  [trial-2399↪gprs:sysmo↪ping.py:22]
03:41:32.562033 tst                       ping.py:22: Test FAILED (6.7 sec)
03:41:32.623069 run    osmo-hlr_10.42.42.2(pid=4554): ERR: Terminated: ERROR {rc=237}  [trial-2399↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4554)]
03:41:32.673014 run    osmo-hlr_10.42.42.2(pid=4554): stdout: 
| (launched: 2022-12-14_03:41:29.213483) 
03:41:32.723307 run    osmo-hlr_10.42.42.2(pid=4554): stderr: 
| �[0;m�[1;31m20221214034129412 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214034129412 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214034129412 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214034129412 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214034129412 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214034129412 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214034129426 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214034129434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214034129435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214034129435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
03:41:32.766582 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4553): Terminating (SIGTERM)
03:41:32.807094 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4556): Terminating (SIGTERM)
03:41:32.847675 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4559): Terminating (SIGTERM)
03:41:32.857154 ---      ParallelTerminationStrategy: PID 4553 died...
03:41:32.911932 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4553): Terminated: ok {rc=0}
03:41:32.921871 ---      ParallelTerminationStrategy: PID 4556 died...
03:41:32.976147 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4556): Terminated: ok {rc=0}
03:41:32.986062 ---      ParallelTerminationStrategy: PID 4559 died...
03:41:33.040334 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4559): Terminated: ok {rc=0}
03:41:33.129662 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4557): Process ended prematurely: osmo-stp_10.42.42.5(pid=4557) [trial-2399↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4557)]