Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-b200.iperf3.py (from gprs_trx-b200)

Failing for the past 82 builds (Since #2318 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=5955): Process ended prematurely: osmo-stp_10.42.42.5(pid=5955) [trial-2399↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5955)]

Standard Output

----------------------------------------------
trial-2399 gprs:trx-b200 iperf3.py
----------------------------------------------
03:57:27.488685 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
03:57:27.500557 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
03:57:27.644691 tst                        iperf3.py: using LAC 38383
03:57:27.767613 tst                        iperf3.py: using RAC 133
03:57:27.890836 tst                        iperf3.py: using CellId 38383
03:57:28.013236 tst                        iperf3.py: using BVCI 38384
03:57:28.036746 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
03:57:28.047713 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
03:57:28.058499 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
03:57:28.068999 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
03:57:28.080306 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
03:57:28.091403 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
03:57:28.102740 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
03:57:28.113905 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
03:57:28.125161 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
03:57:28.405915 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
03:57:28.533757 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
03:57:28.852918 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5947): Launched
03:57:29.117732 run iperf3-srv_10.42.42.10(pid=5948): Launched
03:57:29.305027 tst                      iperf3.py:8: start network...
03:57:29.432803 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
03:57:29.922907 run          create_hlr_db(pid=5949): Launched
03:57:30.097753 bus                          /gobi_6: Setting Powered False
03:57:31.128570 run          create_hlr_db(pid=5949): Terminated: ok {rc=0}
03:57:31.617329 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5951): Launched
03:57:32.088509 run    osmo-hlr_10.42.42.2(pid=5952): Launched
03:57:32.234356 run              osmo-stp_10.42.42.5: Starting osmo-stp
03:57:32.830223 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5954): Launched
03:57:33.159064 run    osmo-stp_10.42.42.5(pid=5955): Launched
03:57:33.279111 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
03:57:33.849873 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5957): Launched
03:57:33.966868 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
03:57:34.254592 run               patchelf(pid=5958): Launched
03:57:34.447090 run    osmo-stp_10.42.42.5(pid=5955): ERR: Terminated: ERROR {rc=1}  [trial-2399↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5955)]
03:57:34.587703 run    osmo-stp_10.42.42.5(pid=5955): stdout: 
| (launched: 2022-12-14_03:57:32.996896)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:57:34.728005 run    osmo-stp_10.42.42.5(pid=5955): stderr: 
| �[0;m�[38;5;43m20221214035733189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214035733189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214035733190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214035733190 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214035733191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214035733191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214035733191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:57:34.865466 run    osmo-stp_10.42.42.5(pid=5955): stdout: 
| (launched: 2022-12-14_03:57:32.996896)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:57:35.000417 run    osmo-stp_10.42.42.5(pid=5955): stderr: 
| �[0;m�[38;5;43m20221214035733189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214035733189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214035733190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214035733190 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214035733191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214035733191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214035733191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:57:35.156506 run               patchelf(pid=5958): Terminating (SIGINT)
03:57:35.339777 run               patchelf(pid=5958): Terminated: ok {rc=0}
03:57:35.373768 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=5955): Process ended prematurely: osmo-stp_10.42.42.5(pid=5955) [trial-2399↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5955)]  [trial-2399↪gprs:trx-b200↪iperf3.py:8]
03:57:35.383827 tst                      iperf3.py:8: Test FAILED (7.9 sec)
03:57:35.447491 run    osmo-hlr_10.42.42.2(pid=5952): ERR: Terminated: ERROR {rc=237}  [trial-2399↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5952)]
03:57:35.499198 run    osmo-hlr_10.42.42.2(pid=5952): stdout: 
| (launched: 2022-12-14_03:57:31.832924) 
03:57:35.551540 run    osmo-hlr_10.42.42.2(pid=5952): stderr: 
| �[0;m�[1;31m20221214035732099 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214035732099 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214035732099 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214035732099 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214035732099 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214035732099 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214035732127 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214035732151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214035732151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214035732151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
03:57:35.596492 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5947): Terminating (SIGTERM)
03:57:35.638702 run iperf3-srv_10.42.42.10(pid=5948): Terminating (SIGTERM)
03:57:35.681606 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5951): Terminating (SIGTERM)
03:57:35.724286 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5954): Terminating (SIGTERM)
03:57:35.767366 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5957): Terminating (SIGTERM)
03:57:35.777094 ---      ParallelTerminationStrategy: PID 5947 died...
03:57:35.834235 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5947): Terminated: ok {rc=0}
03:57:35.844233 ---      ParallelTerminationStrategy: PID 5948 died...
03:57:35.900491 run iperf3-srv_10.42.42.10(pid=5948): Terminated {rc=256}
03:57:35.910509 ---      ParallelTerminationStrategy: PID 5951 died...
03:57:35.966825 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5951): Terminated: ok {rc=0}
03:57:35.976730 ---      ParallelTerminationStrategy: PID 5954 died...
03:57:36.032858 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5954): Terminated: ok {rc=0}
03:57:36.042888 ---      ParallelTerminationStrategy: PID 5957 died...
03:57:36.099085 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5957): Terminated: ok {rc=0}
03:57:36.186626 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5955): Process ended prematurely: osmo-stp_10.42.42.5(pid=5955) [trial-2399↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5955)]