Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20643): Process ended prematurely: osmo-stp_10.42.42.5(pid=20643) [trial-2401↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20643)]
Standard Output
---------------------------------------------- trial-2401 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 07:05:57.529848 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:05:57.540514 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:05:57.687478 tst cs_paging_gprs_active.py: using LAC 39231 07:05:57.810462 tst cs_paging_gprs_active.py: using RAC 216 07:05:57.929874 tst cs_paging_gprs_active.py: using CellId 39231 07:05:58.050726 tst cs_paging_gprs_active.py: using BVCI 39232 07:05:58.074452 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:05:58.085298 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:05:58.095921 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:05:58.106569 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:05:58.117151 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:05:58.127750 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:05:58.138454 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:05:58.148909 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:05:58.160014 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:05:58.279262 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:05:58.581996 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:05:58.721944 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:05:59.067000 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20633): Launched 07:05:59.353716 run iperf3-srv_10.42.42.10(pid=20634): Launched 07:05:59.557599 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:05:59.696680 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:06:00.041510 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20635): Launched 07:06:00.327986 run iperf3-srv_10.42.42.10(pid=20636): Launched 07:06:00.531875 tst cs_paging_gprs_active.py:38: start network... 07:06:00.677153 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:06:01.258004 run create_hlr_db(pid=20637): Launched 07:06:01.453815 bus /gobi_6: Setting Powered False 07:06:02.456584 run create_hlr_db(pid=20637): Terminated: ok {rc=0} 07:06:02.916526 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20639): Launched 07:06:03.249860 run osmo-hlr_10.42.42.2(pid=20640): Launched 07:06:03.367493 run osmo-stp_10.42.42.5: Starting osmo-stp 07:06:03.903186 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20642): Launched 07:06:04.212732 run osmo-stp_10.42.42.5(pid=20643): Launched 07:06:04.324411 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:06:04.864649 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20645): Launched 07:06:04.974533 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:06:05.246773 run patchelf(pid=20646): Launched 07:06:05.427166 run osmo-stp_10.42.42.5(pid=20643): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20643)] 07:06:05.558603 run osmo-stp_10.42.42.5(pid=20643): stdout: | (launched: 2022-12-14_07:06:04.059547) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:06:05.690145 run osmo-stp_10.42.42.5(pid=20643): stderr: | �[0;m�[38;5;43m20221214070604234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214070604234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214070604234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214070604235 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214070604235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214070604235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214070604235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:06:05.817280 run osmo-stp_10.42.42.5(pid=20643): stdout: | (launched: 2022-12-14_07:06:04.059547) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:06:05.943407 run osmo-stp_10.42.42.5(pid=20643): stderr: | �[0;m�[38;5;43m20221214070604234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214070604234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214070604234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214070604235 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214070604235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214070604235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214070604235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:06:06.091478 run patchelf(pid=20646): Terminating (SIGINT) 07:06:06.266606 run patchelf(pid=20646): Terminated: ok {rc=0} 07:06:06.298478 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20643): Process ended prematurely: osmo-stp_10.42.42.5(pid=20643) [trial-2401↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20643)] [trial-2401↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 07:06:06.307580 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 07:06:06.367182 run osmo-hlr_10.42.42.2(pid=20640): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20640)] 07:06:06.415680 run osmo-hlr_10.42.42.2(pid=20640): stdout: | (launched: 2022-12-14_07:06:03.085376) 07:06:06.464891 run osmo-hlr_10.42.42.2(pid=20640): stderr: | �[0;m�[1;31m20221214070603288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214070603288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214070603288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214070603288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214070603288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214070603289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214070603301 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214070603309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214070603310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214070603310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:06:06.506863 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20633): Terminating (SIGTERM) 07:06:06.546205 run iperf3-srv_10.42.42.10(pid=20634): Terminating (SIGTERM) 07:06:06.585884 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20635): Terminating (SIGTERM) 07:06:06.625474 run iperf3-srv_10.42.42.10(pid=20636): Terminating (SIGTERM) 07:06:06.664915 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20639): Terminating (SIGTERM) 07:06:06.704639 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20642): Terminating (SIGTERM) 07:06:06.744667 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20645): Terminating (SIGTERM) 07:06:06.753903 --- ParallelTerminationStrategy: PID 20633 died... 07:06:06.806807 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20633): Terminated: ok {rc=0} 07:06:06.816304 --- ParallelTerminationStrategy: PID 20634 died... 07:06:06.868738 run iperf3-srv_10.42.42.10(pid=20634): Terminated {rc=256} 07:06:06.878192 --- ParallelTerminationStrategy: PID 20635 died... 07:06:06.930871 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20635): Terminated: ok {rc=0} 07:06:06.940303 --- ParallelTerminationStrategy: PID 20636 died... 07:06:06.992723 run iperf3-srv_10.42.42.10(pid=20636): Terminated {rc=256} 07:06:07.002240 --- ParallelTerminationStrategy: PID 20639 died... 07:06:07.054720 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20639): Terminated: ok {rc=0} 07:06:07.064162 --- ParallelTerminationStrategy: PID 20642 died... 07:06:07.116696 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20642): Terminated: ok {rc=0} 07:06:07.126243 --- ParallelTerminationStrategy: PID 20645 died... 07:06:07.178711 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20645): Terminated: ok {rc=0} 07:06:07.267119 bus /gobi_0: Setting Powered False 07:06:08.374621 bus /gobi_0: Setting Powered False 07:06:09.487523 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20643): Process ended prematurely: osmo-stp_10.42.42.5(pid=20643) [trial-2401↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20643)]