Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=22134): Process ended prematurely: osmo-stp_10.42.42.5(pid=22134) [trial-2401↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22134)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 07:23:37.464239 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:23:37.475627 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 07:23:37.619545 tst cs_paging_gprs_active.py: using LAC 39324 07:23:37.751203 tst cs_paging_gprs_active.py: using RAC 54 07:23:37.882182 tst cs_paging_gprs_active.py: using CellId 39324 07:23:38.012551 tst cs_paging_gprs_active.py: using BVCI 39325 07:23:38.038460 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:23:38.050495 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:23:38.062301 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:23:38.074001 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:23:38.085876 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:23:38.097976 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:23:38.109997 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:23:38.121876 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:23:38.134037 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 07:23:38.260437 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 07:23:38.549245 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:23:38.679006 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:23:39.004890 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22124): Launched 07:23:39.276122 run iperf3-srv_10.42.42.10(pid=22125): Launched 07:23:39.467731 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:23:39.598263 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:23:39.924754 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22126): Launched 07:23:40.193834 run iperf3-srv_10.42.42.10(pid=22127): Launched 07:23:40.383650 tst cs_paging_gprs_active.py:38: start network... 07:23:40.512668 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:23:41.012268 run create_hlr_db(pid=22128): Launched 07:23:41.190153 bus /gobi_6: Setting Powered False 07:23:42.211355 run create_hlr_db(pid=22128): Terminated: ok {rc=0} 07:23:42.626396 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22130): Launched 07:23:42.938155 run osmo-hlr_10.42.42.2(pid=22131): Launched 07:23:43.052149 run osmo-stp_10.42.42.5: Starting osmo-stp 07:23:43.591047 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22133): Launched 07:23:43.901928 run osmo-stp_10.42.42.5(pid=22134): Launched 07:23:44.013477 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:23:44.554179 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22136): Launched 07:23:44.664273 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:23:44.935846 run patchelf(pid=22137): Launched 07:23:45.118254 run osmo-stp_10.42.42.5(pid=22134): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22134)] 07:23:45.250552 run osmo-stp_10.42.42.5(pid=22134): stdout: | (launched: 2022-12-14_07:23:43.748310) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:23:45.382772 run osmo-stp_10.42.42.5(pid=22134): stderr: | �[0;m�[38;5;43m20221214072343920 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214072343920 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214072343920 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214072343921 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214072343921 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214072343921 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214072343921 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:23:45.510481 run osmo-stp_10.42.42.5(pid=22134): stdout: | (launched: 2022-12-14_07:23:43.748310) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:23:45.637092 run osmo-stp_10.42.42.5(pid=22134): stderr: | �[0;m�[38;5;43m20221214072343920 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214072343920 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214072343920 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214072343921 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214072343921 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214072343921 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214072343921 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:23:45.785922 run patchelf(pid=22137): Terminating (SIGINT) 07:23:45.965472 run patchelf(pid=22137): Terminated: ok {rc=0} 07:23:45.999330 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22134): Process ended prematurely: osmo-stp_10.42.42.5(pid=22134) [trial-2401↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22134)] [trial-2401↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 07:23:46.009779 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 07:23:46.071366 run osmo-hlr_10.42.42.2(pid=22131): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22131)] 07:23:46.121791 run osmo-hlr_10.42.42.2(pid=22131): stdout: | (launched: 2022-12-14_07:23:42.784559) 07:23:46.173506 run osmo-hlr_10.42.42.2(pid=22131): stderr: | �[0;m�[1;31m20221214072342959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214072342959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214072342959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214072342959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214072342959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214072342959 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214072342972 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214072342982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214072342982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214072342982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:23:46.216784 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22124): Terminating (SIGTERM) 07:23:46.257491 run iperf3-srv_10.42.42.10(pid=22125): Terminating (SIGTERM) 07:23:46.298633 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22126): Terminating (SIGTERM) 07:23:46.340778 run iperf3-srv_10.42.42.10(pid=22127): Terminating (SIGTERM) 07:23:46.384606 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22130): Terminating (SIGTERM) 07:23:46.425507 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22133): Terminating (SIGTERM) 07:23:46.468268 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22136): Terminating (SIGTERM) 07:23:46.477730 --- ParallelTerminationStrategy: PID 22124 died... 07:23:46.532203 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22124): Terminated: ok {rc=0} 07:23:46.542351 --- ParallelTerminationStrategy: PID 22125 died... 07:23:46.596112 run iperf3-srv_10.42.42.10(pid=22125): Terminated {rc=256} 07:23:46.606485 --- ParallelTerminationStrategy: PID 22126 died... 07:23:46.660902 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22126): Terminated: ok {rc=0} 07:23:46.670935 --- ParallelTerminationStrategy: PID 22127 died... 07:23:46.724714 run iperf3-srv_10.42.42.10(pid=22127): Terminated {rc=256} 07:23:46.735113 --- ParallelTerminationStrategy: PID 22130 died... 07:23:46.789210 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22130): Terminated: ok {rc=0} 07:23:46.799638 --- ParallelTerminationStrategy: PID 22133 died... 07:23:46.854375 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22133): Terminated: ok {rc=0} 07:23:46.864799 --- ParallelTerminationStrategy: PID 22136 died... 07:23:46.920610 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22136): Terminated: ok {rc=0} 07:23:47.007437 bus /gobi_0: Setting Powered False 07:23:48.108582 bus /gobi_0: Setting Powered False 07:23:49.216264 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22134): Process ended prematurely: osmo-stp_10.42.42.5(pid=22134) [trial-2401↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22134)]