Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=23396): Process ended prematurely: osmo-stp_10.42.42.5(pid=23396) [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23396)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 07:37:51.798028 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:37:51.809038 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:37:51.957485 tst cs_paging_gprs_active.py: using LAC 39400 07:37:52.089238 tst cs_paging_gprs_active.py: using RAC 130 07:37:52.220470 tst cs_paging_gprs_active.py: using CellId 39400 07:37:52.349316 tst cs_paging_gprs_active.py: using BVCI 39401 07:37:52.374981 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:37:52.386424 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:37:52.397561 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:37:52.408653 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:37:52.420002 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:37:52.431538 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:37:52.443117 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:37:52.454546 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:37:52.466268 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:37:52.586154 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:37:52.888016 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:37:53.027201 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:37:53.372063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23386): Launched 07:37:53.658683 run iperf3-srv_10.42.42.10(pid=23387): Launched 07:37:53.862706 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:37:54.001242 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:37:54.344188 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23388): Launched 07:37:54.631546 run iperf3-srv_10.42.42.10(pid=23389): Launched 07:37:54.836810 tst cs_paging_gprs_active.py:38: start network... 07:37:54.976357 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:37:55.500399 run create_hlr_db(pid=23390): Launched 07:37:55.692432 bus /gobi_6: Setting Powered False 07:37:56.713305 run create_hlr_db(pid=23390): Terminated: ok {rc=0} 07:37:57.130159 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23392): Launched 07:37:57.443771 run osmo-hlr_10.42.42.2(pid=23393): Launched 07:37:57.567029 run osmo-stp_10.42.42.5: Starting osmo-stp 07:37:58.112232 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23395): Launched 07:37:58.421617 run osmo-stp_10.42.42.5(pid=23396): Launched 07:37:58.534906 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:37:59.076089 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23398): Launched 07:37:59.185911 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:37:59.458121 run patchelf(pid=23399): Launched 07:37:59.639940 run osmo-stp_10.42.42.5(pid=23396): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23396)] 07:37:59.773187 run osmo-stp_10.42.42.5(pid=23396): stdout: | (launched: 2022-12-14_07:37:58.268673) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:37:59.906011 run osmo-stp_10.42.42.5(pid=23396): stderr: | �[0;m�[38;5;43m20221214073758437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214073758437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214073758437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214073758438 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214073758438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214073758438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214073758438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:38:00.034273 run osmo-stp_10.42.42.5(pid=23396): stdout: | (launched: 2022-12-14_07:37:58.268673) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:38:00.161723 run osmo-stp_10.42.42.5(pid=23396): stderr: | �[0;m�[38;5;43m20221214073758437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214073758437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214073758437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214073758438 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214073758438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214073758438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214073758438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:38:00.311612 run patchelf(pid=23399): Terminating (SIGINT) 07:38:00.488266 run patchelf(pid=23399): Terminated: ok {rc=0} 07:38:00.520472 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23396): Process ended prematurely: osmo-stp_10.42.42.5(pid=23396) [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23396)] [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 07:38:00.529641 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 07:38:00.589351 run osmo-hlr_10.42.42.2(pid=23393): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23393)] 07:38:00.637890 run osmo-hlr_10.42.42.2(pid=23393): stdout: | (launched: 2022-12-14_07:37:57.288711) 07:38:00.686958 run osmo-hlr_10.42.42.2(pid=23393): stderr: | �[0;m�[1;31m20221214073757462 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214073757462 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214073757462 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214073757462 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214073757462 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214073757462 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214073757474 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214073757483 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214073757483 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214073757483 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:38:00.728922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23386): Terminating (SIGTERM) 07:38:00.768626 run iperf3-srv_10.42.42.10(pid=23387): Terminating (SIGTERM) 07:38:00.808373 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23388): Terminating (SIGTERM) 07:38:00.860083 run iperf3-srv_10.42.42.10(pid=23389): Terminating (SIGTERM) 07:38:00.918659 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23392): Terminating (SIGTERM) 07:38:00.960792 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23395): Terminating (SIGTERM) 07:38:01.001490 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23398): Terminating (SIGTERM) 07:38:01.010859 --- ParallelTerminationStrategy: PID 23386 died... 07:38:01.088216 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23386): Terminated: ok {rc=0} 07:38:01.099359 --- ParallelTerminationStrategy: PID 23387 died... 07:38:01.153037 run iperf3-srv_10.42.42.10(pid=23387): Terminated {rc=256} 07:38:01.163064 --- ParallelTerminationStrategy: PID 23388 died... 07:38:01.216735 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23388): Terminated: ok {rc=0} 07:38:01.226799 --- ParallelTerminationStrategy: PID 23389 died... 07:38:01.280200 run iperf3-srv_10.42.42.10(pid=23389): Terminated {rc=256} 07:38:01.290295 --- ParallelTerminationStrategy: PID 23392 died... 07:38:01.344036 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23392): Terminated: ok {rc=0} 07:38:01.354183 --- ParallelTerminationStrategy: PID 23395 died... 07:38:01.407824 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23395): Terminated: ok {rc=0} 07:38:01.418041 --- ParallelTerminationStrategy: PID 23398 died... 07:38:01.471638 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23398): Terminated: ok {rc=0} 07:38:01.555304 bus /gobi_0: Setting Powered False 07:38:02.655885 bus /gobi_0: Setting Powered False 07:38:03.762160 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23396): Process ended prematurely: osmo-stp_10.42.42.5(pid=23396) [trial-2401↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23396)]