Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=29535): Process ended prematurely: osmo-stp_10.42.42.5(pid=29535) [trial-2402↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29535)]
Standard Output
---------------------------------------------- trial-2402 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 08:42:07.634201 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:42:07.644802 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 08:42:07.789150 tst cs_paging_gprs_active.py: using LAC 39734 08:42:07.920308 tst cs_paging_gprs_active.py: using RAC 209 08:42:08.046106 tst cs_paging_gprs_active.py: using CellId 39734 08:42:08.166459 tst cs_paging_gprs_active.py: using BVCI 39735 08:42:08.189492 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:42:08.200389 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:42:08.211093 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:42:08.221669 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:42:08.232717 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:42:08.243683 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:42:08.255094 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:42:08.265947 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:42:08.276871 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:42:08.396322 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:42:08.675343 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:42:08.801153 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:42:09.115142 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29525): Launched 08:42:09.375611 run iperf3-srv_10.42.42.10(pid=29526): Launched 08:42:09.559674 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:42:09.685631 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:42:09.998533 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29527): Launched 08:42:10.259202 run iperf3-srv_10.42.42.10(pid=29528): Launched 08:42:10.443941 tst cs_paging_gprs_active.py:38: start network... 08:42:10.569808 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:42:11.046937 run create_hlr_db(pid=29529): Launched 08:42:11.220363 bus /gobi_6: Setting Powered False 08:42:12.241562 run create_hlr_db(pid=29529): Terminated: ok {rc=0} 08:42:12.671402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29531): Launched 08:42:12.996474 run osmo-hlr_10.42.42.2(pid=29532): Launched 08:42:13.117924 run osmo-stp_10.42.42.5: Starting osmo-stp 08:42:13.680031 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29534): Launched 08:42:14.003430 run osmo-stp_10.42.42.5(pid=29535): Launched 08:42:14.120365 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:42:14.686813 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29537): Launched 08:42:14.801909 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:42:15.084545 run patchelf(pid=29538): Launched 08:42:15.273015 run osmo-stp_10.42.42.5(pid=29535): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29535)] 08:42:15.410665 run osmo-stp_10.42.42.5(pid=29535): stdout: | (launched: 2022-12-14_08:42:13.844376) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:42:15.549126 run osmo-stp_10.42.42.5(pid=29535): stderr: | �[0;m�[38;5;43m20221214084214035 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214084214035 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214084214035 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214084214036 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214084214036 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214084214037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214084214037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:42:15.682793 run osmo-stp_10.42.42.5(pid=29535): stdout: | (launched: 2022-12-14_08:42:13.844376) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:42:15.815271 run osmo-stp_10.42.42.5(pid=29535): stderr: | �[0;m�[38;5;43m20221214084214035 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214084214035 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214084214035 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214084214036 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214084214036 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214084214037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214084214037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:42:15.976941 run patchelf(pid=29538): Terminating (SIGINT) 08:42:16.153536 run patchelf(pid=29538): Terminated: ok {rc=0} 08:42:16.186464 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29535): Process ended prematurely: osmo-stp_10.42.42.5(pid=29535) [trial-2402↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29535)] [trial-2402↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 08:42:16.196704 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 08:42:16.262104 run osmo-hlr_10.42.42.2(pid=29532): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29532)] 08:42:16.313767 run osmo-hlr_10.42.42.2(pid=29532): stdout: | (launched: 2022-12-14_08:42:12.836055) 08:42:16.366853 run osmo-hlr_10.42.42.2(pid=29532): stderr: | �[0;m�[1;31m20221214084213032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214084213032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214084213032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214084213032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214084213032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214084213032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214084213045 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214084213054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214084213054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214084213055 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:42:16.412539 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29525): Terminating (SIGTERM) 08:42:16.455544 run iperf3-srv_10.42.42.10(pid=29526): Terminating (SIGTERM) 08:42:16.500081 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29527): Terminating (SIGTERM) 08:42:16.544341 run iperf3-srv_10.42.42.10(pid=29528): Terminating (SIGTERM) 08:42:16.587389 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29531): Terminating (SIGTERM) 08:42:16.631996 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29534): Terminating (SIGTERM) 08:42:16.676241 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29537): Terminating (SIGTERM) 08:42:16.687652 --- ParallelTerminationStrategy: PID 29525 died... 08:42:16.746528 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29525): Terminated: ok {rc=0} 08:42:16.756916 --- ParallelTerminationStrategy: PID 29526 died... 08:42:16.813396 run iperf3-srv_10.42.42.10(pid=29526): Terminated {rc=256} 08:42:16.823646 --- ParallelTerminationStrategy: PID 29527 died... 08:42:16.880594 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29527): Terminated: ok {rc=0} 08:42:16.891013 --- ParallelTerminationStrategy: PID 29528 died... 08:42:16.947780 run iperf3-srv_10.42.42.10(pid=29528): Terminated {rc=256} 08:42:16.958317 --- ParallelTerminationStrategy: PID 29531 died... 08:42:17.015441 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29531): Terminated: ok {rc=0} 08:42:17.025873 --- ParallelTerminationStrategy: PID 29534 died... 08:42:17.083961 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29534): Terminated: ok {rc=0} 08:42:17.094482 --- ParallelTerminationStrategy: PID 29537 died... 08:42:17.151034 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29537): Terminated: ok {rc=0} 08:42:17.240288 bus /gobi_0: Setting Powered False 08:42:18.342279 bus /gobi_0: Setting Powered False 08:42:19.451798 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29535): Process ended prematurely: osmo-stp_10.42.42.5(pid=29535) [trial-2402↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29535)]