Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=29396): Process ended prematurely: osmo-stp_10.42.42.5(pid=29396) [trial-2402↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29396)]
Standard Output
---------------------------------------------- trial-2402 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 08:40:08.051419 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:08.062717 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:40:08.191080 tst cs_paging_gprs_active.py: using LAC 39724 08:40:08.315440 tst cs_paging_gprs_active.py: using RAC 199 08:40:08.441598 tst cs_paging_gprs_active.py: using CellId 39724 08:40:08.567768 tst cs_paging_gprs_active.py: using BVCI 39725 08:40:08.592285 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:08.603563 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:08.614655 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:08.625860 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:08.636862 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:08.647992 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:08.659425 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:08.670575 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:08.682101 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:40:08.798852 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:40:09.092080 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:40:09.226930 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:40:09.559618 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29386): Launched 08:40:09.836471 run iperf3-srv_10.42.42.10(pid=29387): Launched 08:40:10.033747 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:40:10.168028 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:40:10.500405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29388): Launched 08:40:10.776694 run iperf3-srv_10.42.42.10(pid=29389): Launched 08:40:10.973362 tst cs_paging_gprs_active.py:38: start network... 08:40:11.107356 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:40:11.626840 run create_hlr_db(pid=29390): Launched 08:40:11.812683 bus /gobi_6: Setting Powered False 08:40:12.834267 run create_hlr_db(pid=29390): Terminated: ok {rc=0} 08:40:13.239794 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29392): Launched 08:40:13.545964 run osmo-hlr_10.42.42.2(pid=29393): Launched 08:40:13.665574 run osmo-stp_10.42.42.5: Starting osmo-stp 08:40:14.196603 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29395): Launched 08:40:14.499537 run osmo-stp_10.42.42.5(pid=29396): Launched 08:40:14.610325 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:40:15.136031 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29398): Launched 08:40:15.242803 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:40:15.505524 run patchelf(pid=29399): Launched 08:40:15.681568 run osmo-stp_10.42.42.5(pid=29396): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29396)] 08:40:15.810181 run osmo-stp_10.42.42.5(pid=29396): stdout: | (launched: 2022-12-14_08:40:14.349945) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:40:15.952578 run osmo-stp_10.42.42.5(pid=29396): stderr: | �[0;m�[38;5;43m20221214084014518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214084014518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214084014518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214084014519 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214084014519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214084014519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214084014519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:40:16.080656 run osmo-stp_10.42.42.5(pid=29396): stdout: | (launched: 2022-12-14_08:40:14.349945) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:40:16.208301 run osmo-stp_10.42.42.5(pid=29396): stderr: | �[0;m�[38;5;43m20221214084014518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214084014518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214084014518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214084014519 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214084014519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214084014519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214084014519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:40:16.356094 run patchelf(pid=29399): Terminating (SIGINT) 08:40:16.529228 run patchelf(pid=29399): Terminated: ok {rc=0} 08:40:16.561564 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29396): Process ended prematurely: osmo-stp_10.42.42.5(pid=29396) [trial-2402↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29396)] [trial-2402↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 08:40:16.572004 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 08:40:16.635638 run osmo-hlr_10.42.42.2(pid=29393): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29393)] 08:40:16.687112 run osmo-hlr_10.42.42.2(pid=29393): stdout: | (launched: 2022-12-14_08:40:13.393374) 08:40:16.739546 run osmo-hlr_10.42.42.2(pid=29393): stderr: | �[0;m�[1;31m20221214084013569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214084013569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214084013569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214084013569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214084013569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214084013569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214084013582 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214084013590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214084013590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214084013590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:40:16.784522 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29386): Terminating (SIGTERM) 08:40:16.827587 run iperf3-srv_10.42.42.10(pid=29387): Terminating (SIGTERM) 08:40:16.872929 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29388): Terminating (SIGTERM) 08:40:16.915866 run iperf3-srv_10.42.42.10(pid=29389): Terminating (SIGTERM) 08:40:16.961466 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29392): Terminating (SIGTERM) 08:40:17.003739 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29395): Terminating (SIGTERM) 08:40:17.045795 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29398): Terminating (SIGTERM) 08:40:17.055426 --- ParallelTerminationStrategy: PID 29386 died... 08:40:17.112246 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29386): Terminated: ok {rc=0} 08:40:17.122614 --- ParallelTerminationStrategy: PID 29387 died... 08:40:17.178526 run iperf3-srv_10.42.42.10(pid=29387): Terminated {rc=256} 08:40:17.188788 --- ParallelTerminationStrategy: PID 29388 died... 08:40:17.245435 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29388): Terminated: ok {rc=0} 08:40:17.254780 --- ParallelTerminationStrategy: PID 29389 died... 08:40:17.307526 run iperf3-srv_10.42.42.10(pid=29389): Terminated {rc=256} 08:40:17.316795 --- ParallelTerminationStrategy: PID 29392 died... 08:40:17.370125 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29392): Terminated: ok {rc=0} 08:40:17.379468 --- ParallelTerminationStrategy: PID 29395 died... 08:40:17.432349 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29395): Terminated: ok {rc=0} 08:40:17.441791 --- ParallelTerminationStrategy: PID 29398 died... 08:40:17.495312 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29398): Terminated: ok {rc=0} 08:40:17.579336 bus /gobi_0: Setting Powered False 08:40:18.680301 bus /gobi_0: Setting Powered False 08:40:19.792136 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29396): Process ended prematurely: osmo-stp_10.42.42.5(pid=29396) [trial-2402↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29396)]