Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=30204): Process ended prematurely: osmo-stp_10.42.42.5(pid=30204) [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30204)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 08:51:44.294273 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:51:44.306173 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 08:51:44.453452 tst cs_paging_gprs_active.py: using LAC 39785 08:51:44.582809 tst cs_paging_gprs_active.py: using RAC 5 08:51:44.710152 tst cs_paging_gprs_active.py: using CellId 39785 08:51:44.837720 tst cs_paging_gprs_active.py: using BVCI 39786 08:51:44.862967 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:51:44.875065 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:51:44.886689 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:51:44.898567 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:51:44.910124 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:51:44.921732 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:51:44.933395 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:51:44.944853 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:51:44.956645 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:51:45.074544 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:51:45.360342 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:51:45.488881 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:51:45.807352 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30194): Launched 08:51:46.122101 run iperf3-srv_10.42.42.10(pid=30195): Launched 08:51:46.400414 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:51:46.561383 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:51:46.911616 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30196): Launched 08:51:47.195008 run iperf3-srv_10.42.42.10(pid=30197): Launched 08:51:47.385397 tst cs_paging_gprs_active.py:38: start network... 08:51:47.514403 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:51:47.998081 run create_hlr_db(pid=30198): Launched 08:51:48.173455 bus /gobi_6: Setting Powered False 08:51:49.195326 run create_hlr_db(pid=30198): Terminated: ok {rc=0} 08:51:49.600517 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30200): Launched 08:51:49.906132 run osmo-hlr_10.42.42.2(pid=30201): Launched 08:51:50.023792 run osmo-stp_10.42.42.5: Starting osmo-stp 08:51:50.560865 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30203): Launched 08:51:50.865918 run osmo-stp_10.42.42.5(pid=30204): Launched 08:51:50.977410 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:51:51.510424 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30206): Launched 08:51:51.619218 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:51:51.885815 run patchelf(pid=30207): Launched 08:51:52.064522 run osmo-stp_10.42.42.5(pid=30204): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30204)] 08:51:52.195076 run osmo-stp_10.42.42.5(pid=30204): stdout: | (launched: 2022-12-14_08:51:50.715524) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:51:52.325706 run osmo-stp_10.42.42.5(pid=30204): stderr: | �[0;m�[38;5;43m20221214085150889 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085150889 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085150889 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085150890 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085150890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085150890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085150891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:51:52.452241 run osmo-stp_10.42.42.5(pid=30204): stdout: | (launched: 2022-12-14_08:51:50.715524) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:51:52.577879 run osmo-stp_10.42.42.5(pid=30204): stderr: | �[0;m�[38;5;43m20221214085150889 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085150889 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085150889 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085150890 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085150890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085150890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085150891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:51:52.723148 run patchelf(pid=30207): Terminating (SIGINT) 08:51:52.893770 run patchelf(pid=30207): Terminated: ok {rc=0} 08:51:52.924925 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30204): Process ended prematurely: osmo-stp_10.42.42.5(pid=30204) [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30204)] [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 08:51:52.934281 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 08:51:52.995260 run osmo-hlr_10.42.42.2(pid=30201): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30201)] 08:51:53.044788 run osmo-hlr_10.42.42.2(pid=30201): stdout: | (launched: 2022-12-14_08:51:49.755757) 08:51:53.094747 run osmo-hlr_10.42.42.2(pid=30201): stderr: | �[0;m�[1;31m20221214085149932 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214085149932 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214085149932 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214085149932 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214085149932 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214085149932 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214085149947 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214085149956 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214085149956 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214085149956 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:51:53.137492 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30194): Terminating (SIGTERM) 08:51:53.177453 run iperf3-srv_10.42.42.10(pid=30195): Terminating (SIGTERM) 08:51:53.217624 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30196): Terminating (SIGTERM) 08:51:53.257672 run iperf3-srv_10.42.42.10(pid=30197): Terminating (SIGTERM) 08:51:53.297843 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30200): Terminating (SIGTERM) 08:51:53.337909 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30203): Terminating (SIGTERM) 08:51:53.377713 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30206): Terminating (SIGTERM) 08:51:53.386832 --- ParallelTerminationStrategy: PID 30194 died... 08:51:53.439949 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30194): Terminated: ok {rc=0} 08:51:53.449471 --- ParallelTerminationStrategy: PID 30195 died... 08:51:53.502808 run iperf3-srv_10.42.42.10(pid=30195): Terminated {rc=256} 08:51:53.512316 --- ParallelTerminationStrategy: PID 30196 died... 08:51:53.565870 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30196): Terminated: ok {rc=0} 08:51:53.575327 --- ParallelTerminationStrategy: PID 30197 died... 08:51:53.628493 run iperf3-srv_10.42.42.10(pid=30197): Terminated {rc=256} 08:51:53.637983 --- ParallelTerminationStrategy: PID 30200 died... 08:51:53.691452 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30200): Terminated: ok {rc=0} 08:51:53.700922 --- ParallelTerminationStrategy: PID 30203 died... 08:51:53.754347 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30203): Terminated: ok {rc=0} 08:51:53.763897 --- ParallelTerminationStrategy: PID 30206 died... 08:51:53.817602 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30206): Terminated: ok {rc=0} 08:51:53.906105 bus /gobi_0: Setting Powered False 08:51:55.009844 bus /gobi_0: Setting Powered False 08:51:56.121017 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30204): Process ended prematurely: osmo-stp_10.42.42.5(pid=30204) [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30204)]