Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=31008): Process ended prematurely: osmo-stp_10.42.42.5(pid=31008) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31008)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 08:58:38.221841 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:58:38.232806 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:58:38.391613 tst cs_paging_gprs_active.py: using LAC 39822 08:58:38.516295 tst cs_paging_gprs_active.py: using RAC 42 08:58:38.635977 tst cs_paging_gprs_active.py: using CellId 39822 08:58:38.753701 tst cs_paging_gprs_active.py: using BVCI 39823 08:58:38.776787 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:58:38.787812 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:58:38.798826 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:58:38.809693 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:58:38.820845 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:58:38.832010 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:58:38.843357 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:58:38.854486 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:58:38.865864 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:58:38.987332 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:58:39.269118 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:58:39.396103 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:58:39.712150 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30998): Launched 08:58:39.976822 run iperf3-srv_10.42.42.10(pid=30999): Launched 08:58:40.162246 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:58:40.290138 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:58:40.606324 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31000): Launched 08:58:40.868289 run iperf3-srv_10.42.42.10(pid=31001): Launched 08:58:41.053471 tst cs_paging_gprs_active.py:38: start network... 08:58:41.179967 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:58:41.667778 run create_hlr_db(pid=31002): Launched 08:58:41.856351 bus /gobi_6: Setting Powered False 08:58:42.877271 run create_hlr_db(pid=31002): Terminated: ok {rc=0} 08:58:43.310557 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31004): Launched 08:58:43.638107 run osmo-hlr_10.42.42.2(pid=31005): Launched 08:58:43.759581 run osmo-stp_10.42.42.5: Starting osmo-stp 08:58:44.326443 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31007): Launched 08:58:44.653140 run osmo-stp_10.42.42.5(pid=31008): Launched 08:58:44.771125 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:58:45.339819 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31010): Launched 08:58:45.455729 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:58:45.740392 run patchelf(pid=31011): Launched 08:58:45.955465 run osmo-stp_10.42.42.5(pid=31008): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31008)] 08:58:46.098463 run osmo-stp_10.42.42.5(pid=31008): stdout: | (launched: 2022-12-14_08:58:44.492335) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:58:46.240606 run osmo-stp_10.42.42.5(pid=31008): stderr: | �[0;m�[38;5;43m20221214085844686 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085844686 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085844686 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085844687 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085844687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085844687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085844687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:58:46.377771 run osmo-stp_10.42.42.5(pid=31008): stdout: | (launched: 2022-12-14_08:58:44.492335) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:58:46.513385 run osmo-stp_10.42.42.5(pid=31008): stderr: | �[0;m�[38;5;43m20221214085844686 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085844686 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085844686 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085844687 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085844687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085844687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085844687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:58:46.671094 run patchelf(pid=31011): Terminating (SIGINT) 08:58:46.855784 run patchelf(pid=31011): Terminated: ok {rc=0} 08:58:46.890387 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31008): Process ended prematurely: osmo-stp_10.42.42.5(pid=31008) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31008)] [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 08:58:46.901679 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 08:58:46.965907 run osmo-hlr_10.42.42.2(pid=31005): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31005)] 08:58:47.018675 run osmo-hlr_10.42.42.2(pid=31005): stdout: | (launched: 2022-12-14_08:58:43.476682) 08:58:47.071868 run osmo-hlr_10.42.42.2(pid=31005): stderr: | �[0;m�[1;31m20221214085843676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214085843676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214085843676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214085843676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214085843676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214085843676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214085843689 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214085843699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214085843699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214085843699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:58:47.116787 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30998): Terminating (SIGTERM) 08:58:47.159880 run iperf3-srv_10.42.42.10(pid=30999): Terminating (SIGTERM) 08:58:47.204941 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31000): Terminating (SIGTERM) 08:58:47.246555 run iperf3-srv_10.42.42.10(pid=31001): Terminating (SIGTERM) 08:58:47.288593 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31004): Terminating (SIGTERM) 08:58:47.330396 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31007): Terminating (SIGTERM) 08:58:47.371942 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31010): Terminating (SIGTERM) 08:58:47.381616 --- ParallelTerminationStrategy: PID 30998 died... 08:58:47.437398 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30998): Terminated: ok {rc=0} 08:58:47.447425 --- ParallelTerminationStrategy: PID 30999 died... 08:58:47.502752 run iperf3-srv_10.42.42.10(pid=30999): Terminated {rc=256} 08:58:47.512683 --- ParallelTerminationStrategy: PID 31000 died... 08:58:47.568250 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31000): Terminated: ok {rc=0} 08:58:47.578259 --- ParallelTerminationStrategy: PID 31001 died... 08:58:47.633595 run iperf3-srv_10.42.42.10(pid=31001): Terminated {rc=256} 08:58:47.643575 --- ParallelTerminationStrategy: PID 31004 died... 08:58:47.699274 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31004): Terminated: ok {rc=0} 08:58:47.709374 --- ParallelTerminationStrategy: PID 31007 died... 08:58:47.764861 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31007): Terminated: ok {rc=0} 08:58:47.774880 --- ParallelTerminationStrategy: PID 31010 died... 08:58:47.830301 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31010): Terminated: ok {rc=0} 08:58:47.917115 bus /gobi_0: Setting Powered False 08:58:49.023569 bus /gobi_0: Setting Powered False 08:58:50.132504 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31008): Process ended prematurely: osmo-stp_10.42.42.5(pid=31008) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31008)]