Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31075): Process ended prematurely: osmo-stp_10.42.42.5(pid=31075) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31075)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 08:59:38.316391 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:59:38.328192 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 08:59:38.491985 tst cs_paging_gprs_active.py: using LAC 39827 08:59:38.618509 tst cs_paging_gprs_active.py: using RAC 47 08:59:38.744024 tst cs_paging_gprs_active.py: using CellId 39827 08:59:38.873710 tst cs_paging_gprs_active.py: using BVCI 39828 08:59:38.898639 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:59:38.910227 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:59:38.922088 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:59:38.934878 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:59:38.946295 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:59:38.957561 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:59:38.968912 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:59:38.980242 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:59:38.991799 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:59:39.109289 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:59:39.391179 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:59:39.518740 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:59:39.836749 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31065): Launched 08:59:40.100880 run iperf3-srv_10.42.42.10(pid=31066): Launched 08:59:40.287710 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:59:40.415132 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:59:40.732604 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31067): Launched 08:59:40.995336 run iperf3-srv_10.42.42.10(pid=31068): Launched 08:59:41.180922 tst cs_paging_gprs_active.py:38: start network... 08:59:41.308027 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:59:41.790426 run create_hlr_db(pid=31069): Launched 08:59:41.964919 bus /gobi_6: Setting Powered False 08:59:42.987560 run create_hlr_db(pid=31069): Terminated: ok {rc=0} 08:59:43.420379 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31071): Launched 08:59:43.748921 run osmo-hlr_10.42.42.2(pid=31072): Launched 08:59:43.870484 run osmo-stp_10.42.42.5: Starting osmo-stp 08:59:44.437639 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31074): Launched 08:59:44.765383 run osmo-stp_10.42.42.5(pid=31075): Launched 08:59:44.882777 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:59:45.450358 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31077): Launched 08:59:45.566967 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:59:45.851835 run patchelf(pid=31078): Launched 08:59:46.059816 run osmo-stp_10.42.42.5(pid=31075): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31075)] 08:59:46.196530 run osmo-stp_10.42.42.5(pid=31075): stdout: | (launched: 2022-12-14_08:59:44.603182) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:59:46.355816 run osmo-stp_10.42.42.5(pid=31075): stderr: | �[0;m�[38;5;43m20221214085944794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085944795 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085944795 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085944795 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085944796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085944796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085944796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:59:46.503963 run osmo-stp_10.42.42.5(pid=31075): stdout: | (launched: 2022-12-14_08:59:44.603182) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:59:46.636765 run osmo-stp_10.42.42.5(pid=31075): stderr: | �[0;m�[38;5;43m20221214085944794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085944795 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085944795 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085944795 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085944796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085944796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085944796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:59:46.787296 run patchelf(pid=31078): Terminating (SIGINT) 08:59:46.962782 run patchelf(pid=31078): Terminated: ok {rc=0} 08:59:46.996752 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31075): Process ended prematurely: osmo-stp_10.42.42.5(pid=31075) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31075)] [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 08:59:47.007383 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 08:59:47.072105 run osmo-hlr_10.42.42.2(pid=31072): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31072)] 08:59:47.123749 run osmo-hlr_10.42.42.2(pid=31072): stdout: | (launched: 2022-12-14_08:59:43.586398) 08:59:47.176153 run osmo-hlr_10.42.42.2(pid=31072): stderr: | �[0;m�[1;31m20221214085943784 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214085943784 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214085943784 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214085943784 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214085943784 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214085943784 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214085943796 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214085943805 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214085943805 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214085943805 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:59:47.221663 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31065): Terminating (SIGTERM) 08:59:47.263760 run iperf3-srv_10.42.42.10(pid=31066): Terminating (SIGTERM) 08:59:47.306468 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31067): Terminating (SIGTERM) 08:59:47.346741 run iperf3-srv_10.42.42.10(pid=31068): Terminating (SIGTERM) 08:59:47.386989 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31071): Terminating (SIGTERM) 08:59:47.427348 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31074): Terminating (SIGTERM) 08:59:47.467586 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31077): Terminating (SIGTERM) 08:59:47.476270 --- ParallelTerminationStrategy: PID 31065 died... 08:59:47.530834 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31065): Terminated: ok {rc=0} 08:59:47.540333 --- ParallelTerminationStrategy: PID 31066 died... 08:59:47.594816 run iperf3-srv_10.42.42.10(pid=31066): Terminated {rc=256} 08:59:47.604294 --- ParallelTerminationStrategy: PID 31067 died... 08:59:47.658820 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31067): Terminated: ok {rc=0} 08:59:47.668292 --- ParallelTerminationStrategy: PID 31068 died... 08:59:47.722423 run iperf3-srv_10.42.42.10(pid=31068): Terminated {rc=256} 08:59:47.731801 --- ParallelTerminationStrategy: PID 31071 died... 08:59:47.786402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31071): Terminated: ok {rc=0} 08:59:47.795875 --- ParallelTerminationStrategy: PID 31074 died... 08:59:47.850431 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31074): Terminated: ok {rc=0} 08:59:47.859933 --- ParallelTerminationStrategy: PID 31077 died... 08:59:47.914392 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31077): Terminated: ok {rc=0} 08:59:48.003838 bus /gobi_0: Setting Powered False 08:59:49.106794 bus /gobi_0: Setting Powered False 08:59:50.218965 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31075): Process ended prematurely: osmo-stp_10.42.42.5(pid=31075) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31075)]