Failed
gprs:trx-sysmocell5000.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000)
Stacktrace
osmo-stp_10.42.42.5(pid=30824): Process ended prematurely: osmo-stp_10.42.42.5(pid=30824) [trial-2402↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30824)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-sysmocell5000 cs_paging_gprs_active.py ---------------------------------------------- 08:56:39.693362 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 08:56:39.704686 tst gprs:trx-sysmocell5000: Using 1 x bts (candidates: 1) 08:56:39.841785 tst cs_paging_gprs_active.py: using LAC 39812 08:56:39.958570 tst cs_paging_gprs_active.py: using RAC 32 08:56:40.080065 tst cs_paging_gprs_active.py: using CellId 39812 08:56:40.198789 tst cs_paging_gprs_active.py: using BVCI 39813 08:56:40.222383 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 08:56:40.233424 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 08:56:40.244115 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 08:56:40.254894 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 08:56:40.265935 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 08:56:40.276819 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 08:56:40.287796 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 08:56:40.298650 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 08:56:40.309667 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 08:56:40.429395 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 08:56:40.724042 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:56:40.857760 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:56:41.188419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30814): Launched 08:56:41.465693 run iperf3-srv_10.42.42.10(pid=30815): Launched 08:56:41.661980 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:56:41.795449 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:56:42.126966 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30816): Launched 08:56:42.404928 run iperf3-srv_10.42.42.10(pid=30817): Launched 08:56:42.601267 tst cs_paging_gprs_active.py:38: start network... 08:56:42.734901 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:56:43.251360 run create_hlr_db(pid=30818): Launched 08:56:43.436565 bus /sierra_2: Setting Powered False 08:56:44.459605 run create_hlr_db(pid=30818): Terminated: ok {rc=0} 08:56:44.887096 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30820): Launched 08:56:45.210784 run osmo-hlr_10.42.42.2(pid=30821): Launched 08:56:45.331615 run osmo-stp_10.42.42.5: Starting osmo-stp 08:56:45.901996 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30823): Launched 08:56:46.324375 run osmo-stp_10.42.42.5(pid=30824): Launched 08:56:46.516590 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:56:47.127737 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30826): Launched 08:56:47.243533 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:56:47.511932 run patchelf(pid=30827): Launched 08:56:47.700213 run osmo-stp_10.42.42.5(pid=30824): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30824)] 08:56:47.837499 run osmo-stp_10.42.42.5(pid=30824): stdout: | (launched: 2022-12-14_08:56:46.072202) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:56:47.975417 run osmo-stp_10.42.42.5(pid=30824): stderr: | �[0;m�[38;5;43m20221214085646351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085646351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085646352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085646352 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085646353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085646353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085646353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:56:48.109420 run osmo-stp_10.42.42.5(pid=30824): stdout: | (launched: 2022-12-14_08:56:46.072202) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:56:48.241452 run osmo-stp_10.42.42.5(pid=30824): stderr: | �[0;m�[38;5;43m20221214085646351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085646351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085646352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085646352 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085646353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085646353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085646353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:56:48.394782 run patchelf(pid=30827): Terminating (SIGINT) 08:56:48.574352 run patchelf(pid=30827): Terminated: ok {rc=0} 08:56:48.607859 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30824): Process ended prematurely: osmo-stp_10.42.42.5(pid=30824) [trial-2402↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30824)] [trial-2402↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38] 08:56:48.617980 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 08:56:48.680693 run osmo-hlr_10.42.42.2(pid=30821): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30821)] 08:56:48.731778 run osmo-hlr_10.42.42.2(pid=30821): stdout: | (launched: 2022-12-14_08:56:45.051584) 08:56:48.783477 run osmo-hlr_10.42.42.2(pid=30821): stderr: | �[0;m�[1;31m20221214085645246 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214085645246 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214085645246 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214085645246 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214085645246 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214085645246 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214085645259 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-sysmocell5000/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214085645267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214085645268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214085645268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:56:48.827876 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30814): Terminating (SIGTERM) 08:56:48.869820 run iperf3-srv_10.42.42.10(pid=30815): Terminating (SIGTERM) 08:56:48.911474 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30816): Terminating (SIGTERM) 08:56:48.953435 run iperf3-srv_10.42.42.10(pid=30817): Terminating (SIGTERM) 08:56:48.995120 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30820): Terminating (SIGTERM) 08:56:49.036854 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30823): Terminating (SIGTERM) 08:56:49.078450 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30826): Terminating (SIGTERM) 08:56:49.088061 --- ParallelTerminationStrategy: PID 30814 died... 08:56:49.143952 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30814): Terminated: ok {rc=0} 08:56:49.154066 --- ParallelTerminationStrategy: PID 30815 died... 08:56:49.209336 run iperf3-srv_10.42.42.10(pid=30815): Terminated {rc=256} 08:56:49.219361 --- ParallelTerminationStrategy: PID 30816 died... 08:56:49.275231 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30816): Terminated: ok {rc=0} 08:56:49.285345 --- ParallelTerminationStrategy: PID 30817 died... 08:56:49.341250 run iperf3-srv_10.42.42.10(pid=30817): Terminated {rc=256} 08:56:49.351267 --- ParallelTerminationStrategy: PID 30820 died... 08:56:49.407008 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30820): Terminated: ok {rc=0} 08:56:49.417130 --- ParallelTerminationStrategy: PID 30823 died... 08:56:49.472434 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30823): Terminated: ok {rc=0} 08:56:49.482594 --- ParallelTerminationStrategy: PID 30826 died... 08:56:49.537954 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30826): Terminated: ok {rc=0} 08:56:49.624871 bus /gobi_0: Setting Powered False 08:56:50.731680 bus /gobi_0: Setting Powered False 08:56:51.842594 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30824): Process ended prematurely: osmo-stp_10.42.42.5(pid=30824) [trial-2402↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30824)]