Started by timer Running as SYSTEM Building remotely on host2-deb11build-ansible (obs osmocom-gerrit osmocom-master) in workspace /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_virtual The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_virtual/osmo-gsm-tester/.git # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://gerrit.osmocom.org/osmo-gsm-tester # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-gsm-tester > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-gsm-tester +refs/heads/*:refs/remotes/origin/* # timeout=10 > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 # timeout=10 Commit message: "Update git URLs" > git rev-list --no-walk bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 # timeout=10 [osmo-gsm-tester_virtual] $ /bin/sh -xe /tmp/jenkins6423168433429851465.sh + rm -rf open5gs.build-8.tgz osmo-bsc.build-22718.tgz osmo-bts-oc2g.build-7984.tgz osmo-bts-sysmo.build-10486.tgz osmo-bts.build-9962.tgz osmo-ggsn.build-8960.tgz osmo-hlr.build-11715.tgz osmo-hnbgw.build-9519.tgz osmo-mgw.build-12018.tgz osmo-msc.build-36834.tgz osmo-nitb.build-17123.tgz osmo-pcu-oc2g.build-5390.tgz osmo-pcu-sysmo.build-6671.tgz osmo-pcu.build-6634.tgz osmo-sgsn.build-38495.tgz osmo-stp.build-12300.tgz osmo-trx.build-6936.tgz osmocom-bb.build-6472.tgz srslte.build-19.tgz open5gs.build-8.md5 osmo-bsc.build-22718.md5 osmo-bts-oc2g.build-7984.md5 osmo-bts-sysmo.build-10486.md5 osmo-bts.build-9962.md5 osmo-ggsn.build-8960.md5 osmo-hlr.build-11715.md5 osmo-hnbgw.build-9519.md5 osmo-mgw.build-12018.md5 osmo-msc.build-36834.md5 osmo-nitb.build-17123.md5 osmo-pcu-oc2g.build-5390.md5 osmo-pcu-sysmo.build-6671.md5 osmo-pcu.build-6634.md5 osmo-sgsn.build-38495.md5 osmo-stp.build-12300.md5 osmo-trx.build-6936.md5 osmocom-bb.build-6472.md5 srslte.build-19.md5 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-bsc" build number 22725 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-bts" build number 9965 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-ggsn" build number 8963 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-hlr" build number 11719 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-mgw" build number 12022 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-hnbgw" build number 9529 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-msc" build number 36845 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-pcu" build number 6636 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-sgsn" build number 38507 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-trx" build number 6939 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-nitb" build number 17129 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-stp" build number 12304 Copied 2 artifacts from "osmo-gsm-tester_build-osmocom-bb" build number 6474 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-bts-sysmo" build number 10489 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-pcu-sysmo" build number 6673 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-bts-oc2g" build number 7987 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-pcu-oc2g" build number 5392 Copied 2 artifacts from "osmo-gsm-tester_build-open5gs" build number 8 Copied 2 artifacts from "osmo-gsm-tester_build-srslte" build number 19 Copied 2 artifacts from "osmo-gsm-tester_build-osmocom-bb" build number 6474 [osmo-gsm-tester_virtual] $ /bin/sh -xe /tmp/jenkins7868066267572779252.sh + trap clean_up_trap EXIT INT TERM 0 + clean_up + docker kill osmo-gsm-tester-virtual Error response from daemon: Cannot kill container: osmo-gsm-tester-virtual: No such container: osmo-gsm-tester-virtual + true + docker run --rm -v /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_virtual:/workspace debian:bullseye chmod -R a+rwX /workspace/ + rm -rf trial-* + rm -rf docker-playground + git clone --depth=1 --branch=master https://gerrit.osmocom.org/docker-playground docker-playground Cloning into 'docker-playground'... + git -C docker-playground log --oneline e84d756 ttcn3-epdg-test: restore osmo-epdg.latest.config + make -C docker-playground/debian-buster-jenkins make: Entering directory '/home/osmocom-build/jenkins/workspace/osmo-gsm-tester_virtual/docker-playground/debian-buster-jenkins' awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_virtual/docker-playground/common .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:buster \ --build-arg DISTRO=debian-buster \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=jolly/work \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=jolly/work \ -t docker.io/osmocom-build/debian-buster-jenkins:latest . #0 building with "default" instance using docker driver #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 5.89kB done #2 DONE 0.0s #3 [internal] load metadata for docker.io/library/debian:buster #3 DONE 1.0s #4 [ 1/23] FROM docker.io/library/debian:buster@sha256:58ce6f1271ae1c8a2006ff7d3e54e9874d839f573d8009c20154ad0f2fb0a225 #4 DONE 0.0s #5 https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt #5 CACHED #6 [ 2/23] RUN [ "$(arch)" = "x86_64" ] && dpkg --add-architecture i386; DEBIAN_FRONTEND=noninteractive apt-get update && DEBIAN_FRONTEND=noninteractive apt-get upgrade -y && DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive automake bc bison bzip2 ca-certificates ccache cmake coccinelle cppcheck dahdi-source dblatex dbus debhelper devscripts dh-autoreconf dh-systemd docbook5-xml doxygen flex g++ gawk gcc gcc-arm-none-eabi ghostscript git git-buildpackage graphviz htop inkscape latexmk lcov libaio-dev libasound2-dev libboost-all-dev libc-ares-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client osc patchelf pkg-config pylint python-pip python-setuptools python-yaml python2.7 python3 python3-cryptography python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo systemd tcpdump tex-gyre texinfo unzip wget xsltproc #6 CACHED #7 [ 3/23] RUN SET -x && [ "$(arch)" = "x86_64" ] || exit 0; wget -q https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-14.0.0/LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #7 CACHED #8 [ 4/23] RUN pip3 install 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' 'swig' #8 CACHED #9 [ 5/23] ADD https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt /tmp/pysim_requirements.txt #9 CACHED #10 [internal] load build context #10 transferring context: 1.50kB done #10 DONE 0.0s #11 http://git.osmocom.org/osmo-gsm-manuals/patch #11 DONE 0.1s #12 [ 6/23] RUN pip3 install -r /tmp/pysim_requirements.txt #12 ... #11 http://git.osmocom.org/osmo-gsm-manuals/patch #11 DONE 0.1s #13 http://git.osmocom.org/osmo-ci/patch #13 DONE 0.1s #14 http://git.osmocom.org/python/osmo-python-tests/patch/?id=fb4b813d4df62b7b2445bdced961eb1847267eed #14 DONE 0.2s #15 http://git.osmocom.org/python/osmo-python-tests/patch #15 DONE 0.1s #16 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10//Release #16 DONE 0.2s #12 [ 6/23] RUN pip3 install -r /tmp/pysim_requirements.txt #12 1.021 Collecting git+https://github.com/osmocom/asn1tools (from -r /tmp/pysim_requirements.txt (line 14)) #12 1.021 Cloning https://github.com/osmocom/asn1tools to /tmp/pip-req-build-tq82hkjw #12 2.261 Collecting git+https://github.com/hologram-io/smpp.pdu (from -r /tmp/pysim_requirements.txt (line 16)) #12 2.261 Cloning https://github.com/hologram-io/smpp.pdu to /tmp/pip-req-build-efl3bvx8 #12 2.855 Collecting pyscard (from -r /tmp/pysim_requirements.txt (line 1)) #12 3.054 Downloading https://files.pythonhosted.org/packages/7a/d9/8dd344c82d19c240349695a8de71e9d9cd9c55d62ae3952a103147e4687c/pyscard-2.0.10.tar.gz (153kB) #12 3.115 Installing build dependencies: started #12 5.195 Installing build dependencies: finished with status 'done' #12 5.391 Collecting pyserial (from -r /tmp/pysim_requirements.txt (line 2)) #12 5.422 Downloading https://files.pythonhosted.org/packages/07/bc/587a445451b253b285629263eb51c2d8e9bcea4fc97826266d186f96f558/pyserial-3.5-py2.py3-none-any.whl (90kB) #12 5.455 Collecting pytlv (from -r /tmp/pysim_requirements.txt (line 3)) #12 5.564 Downloading https://files.pythonhosted.org/packages/bf/fb/05cb227d725bae7fce250c5b4706442d74e94e3f5faa655efd4621ed559c/pytlv-0.71.tar.gz #12 5.744 Collecting cmd2>=1.5 (from -r /tmp/pysim_requirements.txt (line 4)) #12 5.827 Downloading https://files.pythonhosted.org/packages/f3/9a/495a0577cbae4a11dc0b2a2174688f0bab83d1b81245a105f1613a365828/cmd2-2.4.3-py3-none-any.whl (147kB) #12 5.883 Collecting jsonpath-ng (from -r /tmp/pysim_requirements.txt (line 5)) #12 5.905 Downloading https://files.pythonhosted.org/packages/16/0a/3b1ee3721b4bd684b0e29c724ab82ed3b2c0e42285beb8bf9e18de8c903f/jsonpath_ng-1.6.1-py3-none-any.whl #12 5.931 Collecting construct>=2.9.51 (from -r /tmp/pysim_requirements.txt (line 6)) #12 5.965 Downloading https://files.pythonhosted.org/packages/b2/fb/08b3f4bf05da99aba8ffea52a558758def16e8516bc75ca94ff73587e7d3/construct-2.10.70-py3-none-any.whl (63kB) #12 5.997 Collecting bidict (from -r /tmp/pysim_requirements.txt (line 7)) #12 6.026 Downloading https://files.pythonhosted.org/packages/b5/82/ce0b6380f35f49d3fe687979a324c342cfa3588380232f3801db9dd62f9e/bidict-0.22.1-py3-none-any.whl #12 6.068 Collecting pyosmocom>=0.0.2 (from -r /tmp/pysim_requirements.txt (line 8)) #12 6.171 Could not find a version that satisfies the requirement pyosmocom>=0.0.2 (from -r /tmp/pysim_requirements.txt (line 8)) (from versions: ) #12 6.225 No matching distribution found for pyosmocom>=0.0.2 (from -r /tmp/pysim_requirements.txt (line 8)) #12 ERROR: process "/bin/sh -c pip3 install -r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 ------ > [ 6/23] RUN pip3 install -r /tmp/pysim_requirements.txt: 5.827 Downloading https://files.pythonhosted.org/packages/f3/9a/495a0577cbae4a11dc0b2a2174688f0bab83d1b81245a105f1613a365828/cmd2-2.4.3-py3-none-any.whl (147kB) 5.883 Collecting jsonpath-ng (from -r /tmp/pysim_requirements.txt (line 5)) 5.905 Downloading https://files.pythonhosted.org/packages/16/0a/3b1ee3721b4bd684b0e29c724ab82ed3b2c0e42285beb8bf9e18de8c903f/jsonpath_ng-1.6.1-py3-none-any.whl 5.931 Collecting construct>=2.9.51 (from -r /tmp/pysim_requirements.txt (line 6)) 5.965 Downloading https://files.pythonhosted.org/packages/b2/fb/08b3f4bf05da99aba8ffea52a558758def16e8516bc75ca94ff73587e7d3/construct-2.10.70-py3-none-any.whl (63kB) 5.997 Collecting bidict (from -r /tmp/pysim_requirements.txt (line 7)) 6.026 Downloading https://files.pythonhosted.org/packages/b5/82/ce0b6380f35f49d3fe687979a324c342cfa3588380232f3801db9dd62f9e/bidict-0.22.1-py3-none-any.whl 6.068 Collecting pyosmocom>=0.0.2 (from -r /tmp/pysim_requirements.txt (line 8)) 6.171 Could not find a version that satisfies the requirement pyosmocom>=0.0.2 (from -r /tmp/pysim_requirements.txt (line 8)) (from versions: ) 6.225 No matching distribution found for pyosmocom>=0.0.2 (from -r /tmp/pysim_requirements.txt (line 8)) ------ Dockerfile:156 -------------------- 154 | 'swig' 155 | ADD https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt /tmp/pysim_requirements.txt 156 | >>> RUN pip3 install -r /tmp/pysim_requirements.txt 157 | 158 | # match the outside user -------------------- ERROR: failed to solve: process "/bin/sh -c pip3 install -r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '/home/osmocom-build/jenkins/workspace/osmo-gsm-tester_virtual/docker-playground/debian-buster-jenkins' + clean_up_trap + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + docker kill osmo-gsm-tester-virtual Error response from daemon: Cannot kill container: osmo-gsm-tester-virtual: No such container: osmo-gsm-tester-virtual + true + docker run --rm -v /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_virtual:/workspace debian:bullseye chmod -R a+rwX /workspace/ Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results No test report files were found. Configuration error? [Checks API] No suitable checks publisher found. Sending e-mails to: jenkins-notifications@lists.osmocom.org Finished: FAILURE