
----------------------------------------------
trial-2349 gprs:sysmo+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
20:13:39.744172 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
20:13:39.756342 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
20:13:39.915059 tst                        iperf3.py: using LAC 16529
20:13:40.044938 tst                        iperf3.py: using RAC 209
20:13:40.176782 tst                        iperf3.py: using CellId 16529
20:13:40.307988 tst                        iperf3.py: using BVCI 16530
20:13:40.333628 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
20:13:40.345095 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
20:13:40.356372 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
20:13:40.367688 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
20:13:40.378868 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
20:13:40.390062 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
20:13:40.401597 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
20:13:40.412712 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
20:13:40.424005 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
20:13:40.709296 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
20:13:40.838249 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
20:13:41.161508 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9792): Launched
20:13:41.431761 run iperf3-srv_10.42.42.10(pid=9793): Launched
20:13:41.621189 tst                      iperf3.py:8: start network...
20:13:41.750615 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:13:42.252686 run          create_hlr_db(pid=9794): Launched
20:13:42.431013 bus                          /gobi_6: Setting Powered False
20:13:43.453175 run          create_hlr_db(pid=9794): Terminated: ok {rc=0}
20:13:43.895556 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9796): Launched
20:13:44.230410 run    osmo-hlr_10.42.42.2(pid=9797): Launched
20:13:44.355044 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:13:44.934899 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9799): Launched
20:13:45.268749 run    osmo-stp_10.42.42.5(pid=9800): Launched
20:13:45.389816 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:13:46.012308 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9802): Launched
20:13:46.135178 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:13:46.444234 run               patchelf(pid=9803): Launched
20:13:46.642890 run    osmo-stp_10.42.42.5(pid=9800): ERR: Terminated: ERROR {rc=1}  [trial-2349↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9800)]
20:13:46.787246 run    osmo-stp_10.42.42.5(pid=9800): stdout: 
| (launched: 2022-12-08_20:13:45.103609)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:13:46.932367 run    osmo-stp_10.42.42.5(pid=9800): stderr: 
| [0;m[38;5;43m20221208201345302 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221208201345302 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221208201345302 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221208201345303 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208201345303 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208201345303 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208201345303 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:13:47.108682 run    osmo-stp_10.42.42.5(pid=9800): stdout: 
| (launched: 2022-12-08_20:13:45.103609)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:13:47.237779 run    osmo-stp_10.42.42.5(pid=9800): stderr: 
| [0;m[38;5;43m20221208201345302 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221208201345302 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221208201345302 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221208201345303 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208201345303 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208201345303 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208201345303 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:13:47.386973 run               patchelf(pid=9803): Terminating (SIGINT)
20:13:47.561818 run               patchelf(pid=9803): Terminated: ok {rc=0}
20:13:47.593807 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=9800): Process ended prematurely: osmo-stp_10.42.42.5(pid=9800) [trial-2349↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9800)]  [trial-2349↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8]
20:13:47.603151 tst                      iperf3.py:8: Test FAILED (7.9 sec)
20:13:47.664471 run    osmo-hlr_10.42.42.2(pid=9797): ERR: Terminated: ERROR {rc=237}  [trial-2349↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9797)]
20:13:47.713927 run    osmo-hlr_10.42.42.2(pid=9797): stdout: 
| (launched: 2022-12-08_20:13:44.064844) 
20:13:47.764313 run    osmo-hlr_10.42.42.2(pid=9797): stderr: 
| [0;m[1;31m20221208201344269 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221208201344269 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221208201344269 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221208201344269 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221208201344269 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221208201344269 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221208201344281 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:sysmo+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221208201344290 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221208201344290 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221208201344290 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:13:47.807187 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9792): Terminating (SIGTERM)
20:13:47.847580 run iperf3-srv_10.42.42.10(pid=9793): Terminating (SIGTERM)
20:13:47.887887 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9796): Terminating (SIGTERM)
20:13:47.928916 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9799): Terminating (SIGTERM)
20:13:47.969927 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9802): Terminating (SIGTERM)
20:13:47.979167 ---      ParallelTerminationStrategy: PID 9792 died...
20:13:48.033828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9792): Terminated: ok {rc=0}
20:13:48.043670 ---      ParallelTerminationStrategy: PID 9793 died...
20:13:48.097690 run iperf3-srv_10.42.42.10(pid=9793): Terminated {rc=256}
20:13:48.107648 ---      ParallelTerminationStrategy: PID 9796 died...
20:13:48.161178 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9796): Terminated: ok {rc=0}
20:13:48.170983 ---      ParallelTerminationStrategy: PID 9799 died...
20:13:48.225610 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9799): Terminated: ok {rc=0}
20:13:48.235336 ---      ParallelTerminationStrategy: PID 9802 died...
20:13:48.289304 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9802): Terminated: ok {rc=0}
20:13:48.378108 bus                          /gobi_6: Setting Powered False
