
----------------------------------------------
trial-2352 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py
----------------------------------------------
01:41:07.530571 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:41:07.541581 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1)
01:41:07.691127 tst               switch_tch_pdch.py: using LAC 18185
01:41:07.806788 tst               switch_tch_pdch.py: using RAC 80
01:41:07.925131 tst               switch_tch_pdch.py: using CellId 18185
01:41:08.041732 tst               switch_tch_pdch.py: using BVCI 18186
01:41:08.064333 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:41:08.075405 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:41:08.086305 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:41:08.097601 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:41:08.108562 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:41:08.119534 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:41:08.130668 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:41:08.141709 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
01:41:08.261334 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
01:41:08.536188 tst            switch_tch_pdch.py:51: start network...
01:41:08.659188 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:41:09.098929 run          create_hlr_db(pid=8079): Launched
01:41:09.220635 bus                          /gobi_6: Setting Powered False
01:41:10.292050 run          create_hlr_db(pid=8079): Terminated: ok {rc=0}
01:41:10.688522 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8081): Launched
01:41:11.006938 run    osmo-hlr_10.42.42.2(pid=8082): Launched
01:41:11.123880 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:41:11.650167 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8084): Launched
01:41:11.966913 run    osmo-stp_10.42.42.5(pid=8085): Launched
01:41:12.082038 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:41:12.609563 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8087): Launched
01:41:12.722875 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:41:13.001628 run               patchelf(pid=8088): Launched
01:41:13.188115 run    osmo-stp_10.42.42.5(pid=8085): ERR: Terminated: ERROR {rc=1}  [trial-2352↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8085)]
01:41:13.325262 run    osmo-stp_10.42.42.5(pid=8085): stdout: 
| (launched: 2022-12-09_01:41:11.811080)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:41:13.461822 run    osmo-stp_10.42.42.5(pid=8085): stderr: 
| [0;m[38;5;43m20221209014112002 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209014112002 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209014112002 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209014112003 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209014112003 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209014112003 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209014112003 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:41:13.593525 run    osmo-stp_10.42.42.5(pid=8085): stdout: 
| (launched: 2022-12-09_01:41:11.811080)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:41:13.724189 run    osmo-stp_10.42.42.5(pid=8085): stderr: 
| [0;m[38;5;43m20221209014112002 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209014112002 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209014112002 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209014112003 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209014112003 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209014112003 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209014112003 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:41:13.876221 run               patchelf(pid=8088): Terminating (SIGINT)
01:41:14.055388 run               patchelf(pid=8088): Terminated: ok {rc=0}
01:41:14.087926 tst            switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=8085): Process ended prematurely: osmo-stp_10.42.42.5(pid=8085) [trial-2352↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8085)]  [trial-2352↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54]
01:41:14.097737 tst            switch_tch_pdch.py:54: Test FAILED (6.6 sec)
01:41:14.161347 run    osmo-hlr_10.42.42.2(pid=8082): ERR: Terminated: ERROR {rc=237}  [trial-2352↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8082)]
01:41:14.213208 run    osmo-hlr_10.42.42.2(pid=8082): stdout: 
| (launched: 2022-12-09_01:41:10.850306) 
01:41:14.265958 run    osmo-hlr_10.42.42.2(pid=8082): stderr: 
| [0;m[1;31m20221209014111048 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209014111048 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209014111048 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209014111048 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209014111048 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209014111048 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209014111058 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209014111067 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209014111067 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209014111067 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:41:14.310469 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8081): Terminating (SIGTERM)
01:41:14.352820 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8084): Terminating (SIGTERM)
01:41:14.395060 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8087): Terminating (SIGTERM)
01:41:14.404647 ---      ParallelTerminationStrategy: PID 8081 died...
01:41:14.460932 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8081): Terminated: ok {rc=0}
01:41:14.471362 ---      ParallelTerminationStrategy: PID 8084 died...
01:41:14.527558 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8084): Terminated: ok {rc=0}
01:41:14.537843 ---      ParallelTerminationStrategy: PID 8087 died...
01:41:14.593750 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8087): Terminated: ok {rc=0}
01:41:14.682158 bus                          /gobi_0: Setting Powered False
01:41:15.786029 bus                          /gobi_0: Setting Powered False
01:41:16.905591 bus                          /gobi_6: Setting Powered False
