
----------------------------------------------
trial-2352 gprs:nanobts+band-1900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
01:45:55.967746 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:55.980171 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
01:45:56.116094 tst                ping_idle_ping.py: using LAC 18211
01:45:56.241968 tst                ping_idle_ping.py: using RAC 106
01:45:56.367488 tst                ping_idle_ping.py: using CellId 18211
01:45:56.494125 tst                ping_idle_ping.py: using BVCI 18212
01:45:56.518535 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:56.530135 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:56.541417 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:56.552630 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:56.563867 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:56.575068 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:56.586608 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:56.597863 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
01:45:56.890805 tst             ping_idle_ping.py:24: start network...
01:45:57.023540 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:45:57.537998 run          create_hlr_db(pid=8415): Launched
01:45:57.712598 bus                          /gobi_6: Setting Powered False
01:45:58.733225 run          create_hlr_db(pid=8415): Terminated: ok {rc=0}
01:45:59.133171 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8417): Launched
01:45:59.434362 run    osmo-hlr_10.42.42.2(pid=8418): Launched
01:45:59.552003 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:46:00.081358 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8420): Launched
01:46:00.381688 run    osmo-stp_10.42.42.5(pid=8421): Launched
01:46:00.491022 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:46:01.075702 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8423): Launched
01:46:01.226334 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:46:01.527747 run               patchelf(pid=8424): Launched
01:46:01.721063 run    osmo-stp_10.42.42.5(pid=8421): ERR: Terminated: ERROR {rc=1}  [trial-2352↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8421)]
01:46:01.862096 run    osmo-stp_10.42.42.5(pid=8421): stdout: 
| (launched: 2022-12-09_01:46:00.233052)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:46:02.002782 run    osmo-stp_10.42.42.5(pid=8421): stderr: 
| [0;m[38;5;43m20221209014600403 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209014600403 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209014600403 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209014600404 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209014600404 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209014600404 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209014600404 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:46:02.138271 run    osmo-stp_10.42.42.5(pid=8421): stdout: 
| (launched: 2022-12-09_01:46:00.233052)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:46:02.271043 run    osmo-stp_10.42.42.5(pid=8421): stderr: 
| [0;m[38;5;43m20221209014600403 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209014600403 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209014600403 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209014600404 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209014600404 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209014600404 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209014600404 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:46:02.424194 run               patchelf(pid=8424): Terminating (SIGINT)
01:46:02.604539 run               patchelf(pid=8424): Terminated: ok {rc=0}
01:46:02.637332 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=8421): Process ended prematurely: osmo-stp_10.42.42.5(pid=8421) [trial-2352↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8421)]  [trial-2352↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27]
01:46:02.646553 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
01:46:02.709839 run    osmo-hlr_10.42.42.2(pid=8418): ERR: Terminated: ERROR {rc=237}  [trial-2352↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8418)]
01:46:02.761483 run    osmo-hlr_10.42.42.2(pid=8418): stdout: 
| (launched: 2022-12-09_01:45:59.285071) 
01:46:02.813572 run    osmo-hlr_10.42.42.2(pid=8418): stderr: 
| [0;m[1;31m20221209014559459 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209014559459 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209014559459 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209014559459 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209014559459 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209014559459 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209014559471 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:nanobts+band-1900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209014559479 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209014559480 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209014559480 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:46:02.858486 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8417): Terminating (SIGTERM)
01:46:02.900547 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8420): Terminating (SIGTERM)
01:46:02.942582 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8423): Terminating (SIGTERM)
01:46:02.952269 ---      ParallelTerminationStrategy: PID 8417 died...
01:46:03.008577 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8417): Terminated: ok {rc=0}
01:46:03.018740 ---      ParallelTerminationStrategy: PID 8420 died...
01:46:03.074803 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8420): Terminated: ok {rc=0}
01:46:03.085063 ---      ParallelTerminationStrategy: PID 8423 died...
01:46:03.141342 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8423): Terminated: ok {rc=0}
01:46:03.229126 bus                          /gobi_6: Setting Powered False
