
----------------------------------------------
trial-2352 gprs:nanobts+band-1900 ping_idle_ping.py
----------------------------------------------
01:44:56.073672 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
01:44:56.085512 tst           gprs:nanobts+band-1900: Using 1 x bts (candidates: 1)
01:44:56.219910 tst                ping_idle_ping.py: using LAC 18206
01:44:56.345506 tst                ping_idle_ping.py: using RAC 101
01:44:56.472043 tst                ping_idle_ping.py: using CellId 18206
01:44:56.597326 tst                ping_idle_ping.py: using BVCI 18207
01:44:56.621762 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
01:44:56.632855 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
01:44:56.643854 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
01:44:56.654938 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
01:44:56.665846 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
01:44:56.676700 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
01:44:56.687781 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
01:44:56.698779 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
01:44:56.974834 tst             ping_idle_ping.py:24: start network...
01:44:57.100301 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:44:57.576467 run          create_hlr_db(pid=8344): Launched
01:44:57.750116 bus                          /gobi_6: Setting Powered False
01:44:58.771222 run          create_hlr_db(pid=8344): Terminated: ok {rc=0}
01:44:59.171394 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8346): Launched
01:44:59.472255 run    osmo-hlr_10.42.42.2(pid=8347): Launched
01:44:59.590740 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:45:00.120118 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8349): Launched
01:45:00.420453 run    osmo-stp_10.42.42.5(pid=8350): Launched
01:45:00.532363 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:45:01.101992 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8352): Launched
01:45:01.238942 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:45:01.535644 run               patchelf(pid=8356): Launched
01:45:01.737396 run    osmo-stp_10.42.42.5(pid=8350): ERR: Terminated: ERROR {rc=1}  [trial-2352↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8350)]
01:45:01.891101 run    osmo-stp_10.42.42.5(pid=8350): stdout: 
| (launched: 2022-12-09_01:45:00.271906)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:45:02.039724 run    osmo-stp_10.42.42.5(pid=8350): stderr: 
| [0;m[38;5;43m20221209014500442 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209014500442 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209014500442 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209014500443 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209014500443 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209014500443 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209014500443 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:45:02.177184 run    osmo-stp_10.42.42.5(pid=8350): stdout: 
| (launched: 2022-12-09_01:45:00.271906)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:45:02.309337 run    osmo-stp_10.42.42.5(pid=8350): stderr: 
| [0;m[38;5;43m20221209014500442 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209014500442 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209014500442 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209014500443 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209014500443 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209014500443 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209014500443 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:45:02.463155 run               patchelf(pid=8356): Terminating (SIGINT)
01:45:02.643387 run               patchelf(pid=8356): Terminated: ok {rc=0}
01:45:02.676037 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=8350): Process ended prematurely: osmo-stp_10.42.42.5(pid=8350) [trial-2352↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8350)]  [trial-2352↪gprs:nanobts+band-1900↪ping_idle_ping.py:27]
01:45:02.685624 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
01:45:02.749383 run    osmo-hlr_10.42.42.2(pid=8347): ERR: Terminated: ERROR {rc=237}  [trial-2352↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8347)]
01:45:02.801376 run    osmo-hlr_10.42.42.2(pid=8347): stdout: 
| (launched: 2022-12-09_01:44:59.323394) 
01:45:02.854026 run    osmo-hlr_10.42.42.2(pid=8347): stderr: 
| [0;m[1;31m20221209014459496 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209014459496 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209014459497 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209014459497 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209014459497 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209014459497 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209014459508 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209014459516 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209014459517 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209014459517 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:45:02.899182 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8346): Terminating (SIGTERM)
01:45:02.941728 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8349): Terminating (SIGTERM)
01:45:02.984393 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8352): Terminating (SIGTERM)
01:45:02.994482 ---      ParallelTerminationStrategy: PID 8346 died...
01:45:03.051562 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8346): Terminated: ok {rc=0}
01:45:03.062288 ---      ParallelTerminationStrategy: PID 8349 died...
01:45:03.119617 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8349): Terminated: ok {rc=0}
01:45:03.130032 ---      ParallelTerminationStrategy: PID 8352 died...
01:45:03.186693 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8352): Terminated: ok {rc=0}
01:45:03.274965 bus                          /gobi_6: Setting Powered False
