
----------------------------------------------
trial-2352 gprs:nanobts+band-900 ping.py
----------------------------------------------
01:50:59.344113 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:50:59.355465 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
01:50:59.491815 tst                          ping.py: using LAC 18238
01:50:59.611413 tst                          ping.py: using RAC 133
01:50:59.729153 tst                          ping.py: using CellId 18238
01:50:59.848391 tst                          ping.py: using BVCI 18239
01:50:59.871302 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:50:59.882052 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:50:59.892434 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:50:59.903132 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:50:59.913989 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:50:59.924627 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:50:59.935518 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:50:59.946302 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
01:51:00.225027 tst                       ping.py:19: start network...
01:51:00.349781 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:51:00.819777 run          create_hlr_db(pid=8769): Launched
01:51:01.003274 bus                          /gobi_6: Setting Powered False
01:51:02.018952 run          create_hlr_db(pid=8769): Terminated: ok {rc=0}
01:51:02.455254 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8771): Launched
01:51:02.776081 run    osmo-hlr_10.42.42.2(pid=8772): Launched
01:51:02.895509 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:51:03.459497 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8774): Launched
01:51:03.782473 run    osmo-stp_10.42.42.5(pid=8775): Launched
01:51:03.898876 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:51:04.463034 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8777): Launched
01:51:04.577690 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:51:04.859232 run               patchelf(pid=8778): Launched
01:51:05.047788 run    osmo-stp_10.42.42.5(pid=8775): ERR: Terminated: ERROR {rc=1}  [trial-2352↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8775)]
01:51:05.185726 run    osmo-stp_10.42.42.5(pid=8775): stdout: 
| (launched: 2022-12-09_01:51:03.622678)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:51:05.324592 run    osmo-stp_10.42.42.5(pid=8775): stderr: 
| [0;m[38;5;43m20221209015103815 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209015103815 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209015103815 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209015103816 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209015103816 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209015103816 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209015103816 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:51:05.457594 run    osmo-stp_10.42.42.5(pid=8775): stdout: 
| (launched: 2022-12-09_01:51:03.622678)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:51:05.589204 run    osmo-stp_10.42.42.5(pid=8775): stderr: 
| [0;m[38;5;43m20221209015103815 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209015103815 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209015103815 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209015103816 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209015103816 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209015103816 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209015103816 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:51:05.742600 run               patchelf(pid=8778): Terminating (SIGINT)
01:51:05.923197 run               patchelf(pid=8778): Terminated: ok {rc=0}
01:51:05.955871 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=8775): Process ended prematurely: osmo-stp_10.42.42.5(pid=8775) [trial-2352↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8775)]  [trial-2352↪gprs:nanobts+band-900↪ping.py:22]
01:51:05.965867 tst                       ping.py:22: Test FAILED (6.6 sec)
01:51:06.029811 run    osmo-hlr_10.42.42.2(pid=8772): ERR: Terminated: ERROR {rc=237}  [trial-2352↪gprs:nanobts+band-900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8772)]
01:51:06.081701 run    osmo-hlr_10.42.42.2(pid=8772): stdout: 
| (launched: 2022-12-09_01:51:02.618897) 
01:51:06.134143 run    osmo-hlr_10.42.42.2(pid=8772): stderr: 
| [0;m[1;31m20221209015102818 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209015102818 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209015102818 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209015102818 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209015102818 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209015102818 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209015102830 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:nanobts+band-900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209015102840 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209015102841 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209015102841 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:51:06.179184 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8771): Terminating (SIGTERM)
01:51:06.221434 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8774): Terminating (SIGTERM)
01:51:06.264094 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8777): Terminating (SIGTERM)
01:51:06.274112 ---      ParallelTerminationStrategy: PID 8771 died...
01:51:06.331074 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8771): Terminated: ok {rc=0}
01:51:06.341550 ---      ParallelTerminationStrategy: PID 8774 died...
01:51:06.398217 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8774): Terminated: ok {rc=0}
01:51:06.408620 ---      ParallelTerminationStrategy: PID 8777 died...
01:51:06.465276 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8777): Terminated: ok {rc=0}
01:51:06.553557 bus                          /gobi_6: Setting Powered False
