
----------------------------------------------
trial-2352 gprs:sysmo+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
00:49:33.032190 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:49:33.043830 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
00:49:33.195889 tst                        iperf3.py: using LAC 17912
00:49:33.319255 tst                        iperf3.py: using RAC 62
00:49:33.443594 tst                        iperf3.py: using CellId 17912
00:49:33.567959 tst                        iperf3.py: using BVCI 17913
00:49:33.592078 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:49:33.602986 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:49:33.613850 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:49:33.624810 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:49:33.635640 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:49:33.646658 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:49:33.657764 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:49:33.668679 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:49:33.679722 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
00:49:33.982858 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
00:49:34.123443 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:49:34.473917 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3397): Launched
00:49:34.765710 run iperf3-srv_10.42.42.10(pid=3398): Launched
00:49:34.972564 tst                      iperf3.py:8: start network...
00:49:35.113498 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:49:35.655165 run          create_hlr_db(pid=3399): Launched
00:49:35.849438 bus                          /gobi_6: Setting Powered False
00:49:36.869891 run          create_hlr_db(pid=3399): Terminated: ok {rc=0}
00:49:37.318686 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3401): Launched
00:49:37.657552 run    osmo-hlr_10.42.42.2(pid=3402): Launched
00:49:37.781332 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:49:38.368119 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3404): Launched
00:49:38.705861 run    osmo-stp_10.42.42.5(pid=3405): Launched
00:49:38.827947 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:49:39.416212 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3407): Launched
00:49:39.536767 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:49:39.830872 run               patchelf(pid=3408): Launched
00:49:40.027234 run    osmo-stp_10.42.42.5(pid=3405): ERR: Terminated: ERROR {rc=1}  [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3405)]
00:49:40.170621 run    osmo-stp_10.42.42.5(pid=3405): stdout: 
| (launched: 2022-12-09_00:49:38.539230)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:49:40.314323 run    osmo-stp_10.42.42.5(pid=3405): stderr: 
| [0;m[38;5;43m20221209004938737 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209004938737 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209004938737 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209004938738 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209004938738 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209004938738 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209004938738 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:49:40.453494 run    osmo-stp_10.42.42.5(pid=3405): stdout: 
| (launched: 2022-12-09_00:49:38.539230)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:49:40.590730 run    osmo-stp_10.42.42.5(pid=3405): stderr: 
| [0;m[38;5;43m20221209004938737 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209004938737 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209004938737 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209004938738 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209004938738 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209004938738 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209004938738 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:49:40.751559 run               patchelf(pid=3408): Terminating (SIGINT)
00:49:40.939563 run               patchelf(pid=3408): Terminated: ok {rc=0}
00:49:40.974041 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3405): Process ended prematurely: osmo-stp_10.42.42.5(pid=3405) [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3405)]  [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8]
00:49:40.984040 tst                      iperf3.py:8: Test FAILED (8.0 sec)
00:49:41.047451 run    osmo-hlr_10.42.42.2(pid=3402): ERR: Terminated: ERROR {rc=237}  [trial-2352↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3402)]
00:49:41.099488 run    osmo-hlr_10.42.42.2(pid=3402): stdout: 
| (launched: 2022-12-09_00:49:37.490101) 
00:49:41.152083 run    osmo-hlr_10.42.42.2(pid=3402): stderr: 
| [0;m[1;31m20221209004937694 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209004937694 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209004937694 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209004937694 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209004937694 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209004937694 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209004937707 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:sysmo+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209004937718 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209004937718 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209004937718 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:49:41.197053 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3397): Terminating (SIGTERM)
00:49:41.239364 run iperf3-srv_10.42.42.10(pid=3398): Terminating (SIGTERM)
00:49:41.281588 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3401): Terminating (SIGTERM)
00:49:41.323847 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3404): Terminating (SIGTERM)
00:49:41.366205 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3407): Terminating (SIGTERM)
00:49:41.375970 ---      ParallelTerminationStrategy: PID 3397 died...
00:49:41.433244 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3397): Terminated: ok {rc=0}
00:49:41.443606 ---      ParallelTerminationStrategy: PID 3398 died...
00:49:41.499856 run iperf3-srv_10.42.42.10(pid=3398): Terminated {rc=256}
00:49:41.510077 ---      ParallelTerminationStrategy: PID 3401 died...
00:49:41.566208 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3401): Terminated: ok {rc=0}
00:49:41.576438 ---      ParallelTerminationStrategy: PID 3404 died...
00:49:41.632778 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3404): Terminated: ok {rc=0}
00:49:41.643046 ---      ParallelTerminationStrategy: PID 3407 died...
00:49:41.699231 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3407): Terminated: ok {rc=0}
00:49:41.788422 bus                          /gobi_6: Setting Powered False
