
----------------------------------------------
trial-2352 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py
----------------------------------------------
01:38:09.700297 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:38:09.714368 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1)
01:38:09.858745 tst                        iperf3.py: using LAC 18170
01:38:09.990815 tst                        iperf3.py: using RAC 65
01:38:10.118881 tst                        iperf3.py: using CellId 18170
01:38:10.248022 tst                        iperf3.py: using BVCI 18171
01:38:10.274484 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:38:10.287341 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:38:10.299664 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:38:10.313281 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:38:10.325978 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:38:10.338897 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:38:10.351589 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:38:10.364705 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:38:10.377501 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4)
01:38:10.683374 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:38:10.822118 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:38:11.175907 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7871): Launched
01:38:11.476648 run iperf3-srv_10.42.42.10(pid=7872): Launched
01:38:11.682669 tst                      iperf3.py:8: start network...
01:38:11.821945 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:38:12.384342 run          create_hlr_db(pid=7873): Launched
01:38:12.576245 bus                          /gobi_6: Setting Powered False
01:38:13.598765 run          create_hlr_db(pid=7873): Terminated: ok {rc=0}
01:38:14.050570 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7875): Launched
01:38:14.488791 run    osmo-hlr_10.42.42.2(pid=7876): Launched
01:38:14.650091 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:38:15.302260 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7878): Launched
01:38:15.729784 run    osmo-stp_10.42.42.5(pid=7879): Launched
01:38:15.993661 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:38:16.657235 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7881): Launched
01:38:16.769710 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:38:17.055023 run               patchelf(pid=7882): Launched
01:38:17.235944 run    osmo-stp_10.42.42.5(pid=7879): ERR: Terminated: ERROR {rc=1}  [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7879)]
01:38:17.368904 run    osmo-stp_10.42.42.5(pid=7879): stdout: 
| (launched: 2022-12-09_01:38:15.471535)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:38:17.502382 run    osmo-stp_10.42.42.5(pid=7879): stderr: 
| [0;m[38;5;43m20221209013815767 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209013815767 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209013815767 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209013815768 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209013815768 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209013815768 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209013815768 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:38:17.631265 run    osmo-stp_10.42.42.5(pid=7879): stdout: 
| (launched: 2022-12-09_01:38:15.471535)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:38:17.758550 run    osmo-stp_10.42.42.5(pid=7879): stderr: 
| [0;m[38;5;43m20221209013815767 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209013815767 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209013815767 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209013815768 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209013815768 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209013815768 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209013815768 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:38:17.907583 run               patchelf(pid=7882): Terminating (SIGINT)
01:38:18.081679 run               patchelf(pid=7882): Terminated: ok {rc=0}
01:38:18.114415 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=7879): Process ended prematurely: osmo-stp_10.42.42.5(pid=7879) [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7879)]  [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8]
01:38:18.124696 tst                      iperf3.py:8: Test FAILED (8.5 sec)
01:38:18.190085 run    osmo-hlr_10.42.42.2(pid=7876): ERR: Terminated: ERROR {rc=237}  [trial-2352↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7876)]
01:38:18.241679 run    osmo-hlr_10.42.42.2(pid=7876): stdout: 
| (launched: 2022-12-09_01:38:14.219768) 
01:38:18.295065 run    osmo-hlr_10.42.42.2(pid=7876): stderr: 
| [0;m[1;31m20221209013814531 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209013814531 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209013814531 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209013814531 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209013814531 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209013814531 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209013814552 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209013814564 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209013814564 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209013814564 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:38:18.339199 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7871): Terminating (SIGTERM)
01:38:18.382792 run iperf3-srv_10.42.42.10(pid=7872): Terminating (SIGTERM)
01:38:18.424600 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7875): Terminating (SIGTERM)
01:38:18.468038 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7878): Terminating (SIGTERM)
01:38:18.515330 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7881): Terminating (SIGTERM)
01:38:18.525947 ---      ParallelTerminationStrategy: PID 7871 died...
01:38:18.585736 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7871): Terminated: ok {rc=0}
01:38:18.596366 ---      ParallelTerminationStrategy: PID 7872 died...
01:38:18.652485 run iperf3-srv_10.42.42.10(pid=7872): Terminated {rc=256}
01:38:18.664058 ---      ParallelTerminationStrategy: PID 7875 died...
01:38:18.720136 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7875): Terminated: ok {rc=0}
01:38:18.731748 ---      ParallelTerminationStrategy: PID 7878 died...
01:38:18.789112 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7878): Terminated: ok {rc=0}
01:38:18.799697 ---      ParallelTerminationStrategy: PID 7881 died...
01:38:18.855973 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7881): Terminated: ok {rc=0}
01:38:18.944575 bus                          /gobi_6: Setting Powered False
