
----------------------------------------------
trial-2353 gprs:nanobts+band-900 ping_idle_ping.py
----------------------------------------------
03:18:16.676712 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:18:16.691319 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
03:18:16.841956 tst                ping_idle_ping.py: using LAC 18700
03:18:16.977410 tst                ping_idle_ping.py: using RAC 85
03:18:17.102595 tst                ping_idle_ping.py: using CellId 18700
03:18:17.246842 tst                ping_idle_ping.py: using BVCI 18701
03:18:17.272607 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:18:17.284594 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:18:17.297030 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:18:17.308612 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:18:17.320073 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:18:17.331193 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:18:17.342853 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:18:17.354405 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
03:18:17.641826 tst             ping_idle_ping.py:24: start network...
03:18:17.774874 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
03:18:18.281547 run         create_hlr_db(pid=17398): Launched
03:18:18.462857 bus                          /gobi_6: Setting Powered False
03:18:19.479084 run         create_hlr_db(pid=17398): Terminated: ok {rc=0}
03:18:19.876471 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17400): Launched
03:18:20.169583 run   osmo-hlr_10.42.42.2(pid=17401): Launched
03:18:20.281242 run              osmo-stp_10.42.42.5: Starting osmo-stp
03:18:20.794800 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17403): Launched
03:18:21.085238 run   osmo-stp_10.42.42.5(pid=17404): Launched
03:18:21.191422 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
03:18:21.721100 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17406): Launched
03:18:21.835031 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
03:18:22.108296 run              patchelf(pid=17407): Launched
03:18:22.290536 run   osmo-stp_10.42.42.5(pid=17404): ERR: Terminated: ERROR {rc=1}  [trial-2353↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17404)]
03:18:22.426463 run   osmo-stp_10.42.42.5(pid=17404): stdout: 
| (launched: 2022-12-09_03:18:20.942459)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:18:22.559429 run   osmo-stp_10.42.42.5(pid=17404): stderr: 
| [0;m[38;5;43m20221209031821111 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209031821111 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209031821111 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209031821112 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209031821112 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209031821112 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209031821112 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:18:22.688823 run   osmo-stp_10.42.42.5(pid=17404): stdout: 
| (launched: 2022-12-09_03:18:20.942459)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:18:22.816553 run   osmo-stp_10.42.42.5(pid=17404): stderr: 
| [0;m[38;5;43m20221209031821111 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209031821111 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209031821111 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209031821112 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209031821112 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209031821112 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209031821112 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:18:22.966039 run              patchelf(pid=17407): Terminating (SIGINT)
03:18:23.140396 run              patchelf(pid=17407): Terminated: ok {rc=0}
03:18:23.172153 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=17404): Process ended prematurely: osmo-stp_10.42.42.5(pid=17404) [trial-2353↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17404)]  [trial-2353↪gprs:nanobts+band-900↪ping_idle_ping.py:27]
03:18:23.181222 tst             ping_idle_ping.py:27: Test FAILED (6.5 sec)
03:18:23.242911 run   osmo-hlr_10.42.42.2(pid=17401): ERR: Terminated: ERROR {rc=237}  [trial-2353↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17401)]
03:18:23.293070 run   osmo-hlr_10.42.42.2(pid=17401): stdout: 
| (launched: 2022-12-09_03:18:20.023364) 
03:18:23.343796 run   osmo-hlr_10.42.42.2(pid=17401): stderr: 
| [0;m[1;31m20221209031820202 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209031820202 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209031820202 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209031820202 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209031820202 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209031820202 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209031820215 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209031820223 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209031820223 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209031820223 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
03:18:23.387166 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17400): Terminating (SIGTERM)
03:18:23.428260 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17403): Terminating (SIGTERM)
03:18:23.469101 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17406): Terminating (SIGTERM)
03:18:23.478708 ---      ParallelTerminationStrategy: PID 17400 died...
03:18:23.533536 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17400): Terminated: ok {rc=0}
03:18:23.543689 ---      ParallelTerminationStrategy: PID 17403 died...
03:18:23.598352 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17403): Terminated: ok {rc=0}
03:18:23.608253 ---      ParallelTerminationStrategy: PID 17406 died...
03:18:23.662844 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17406): Terminated: ok {rc=0}
03:18:23.748098 bus                          /gobi_6: Setting Powered False
