
----------------------------------------------
trial-2353 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
02:34:22.847825 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:34:22.859368 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
02:34:22.996586 tst         cs_paging_gprs_active.py: using LAC 18465
02:34:23.125276 tst         cs_paging_gprs_active.py: using RAC 105
02:34:23.244207 tst         cs_paging_gprs_active.py: using CellId 18465
02:34:23.359875 tst         cs_paging_gprs_active.py: using BVCI 18466
02:34:23.382998 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:34:23.394494 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:34:23.405696 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:34:23.416889 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:34:23.427981 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:34:23.439195 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:34:23.450349 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:34:23.461357 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:34:23.472529 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
02:34:23.590766 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
02:34:23.884051 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
02:34:24.018421 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
02:34:24.348828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12388): Launched
02:34:24.625543 run iperf3-srv_10.42.42.10(pid=12389): Launched
02:34:24.822680 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
02:34:24.956886 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
02:34:25.287956 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12390): Launched
02:34:25.563735 run iperf3-srv_10.42.42.10(pid=12391): Launched
02:34:25.760999 tst      cs_paging_gprs_active.py:38: start network...
02:34:25.895237 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
02:34:26.398660 run         create_hlr_db(pid=12392): Launched
02:34:26.584546 bus                          /gobi_6: Setting Powered False
02:34:27.606727 run         create_hlr_db(pid=12392): Terminated: ok {rc=0}
02:34:28.005122 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12394): Launched
02:34:28.302450 run   osmo-hlr_10.42.42.2(pid=12395): Launched
02:34:28.412264 run              osmo-stp_10.42.42.5: Starting osmo-stp
02:34:28.929432 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12397): Launched
02:34:29.227477 run   osmo-stp_10.42.42.5(pid=12398): Launched
02:34:29.336585 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
02:34:29.856479 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12400): Launched
02:34:29.962758 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
02:34:30.222753 run              patchelf(pid=12401): Launched
02:34:30.397370 run   osmo-stp_10.42.42.5(pid=12398): ERR: Terminated: ERROR {rc=1}  [trial-2353↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12398)]
02:34:30.524842 run   osmo-stp_10.42.42.5(pid=12398): stdout: 
| (launched: 2022-12-09_02:34:29.080768)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:34:30.653401 run   osmo-stp_10.42.42.5(pid=12398): stderr: 
| [0;m[38;5;43m20221209023429248 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209023429248 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209023429248 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209023429249 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209023429249 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209023429249 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209023429249 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:34:30.776900 run   osmo-stp_10.42.42.5(pid=12398): stdout: 
| (launched: 2022-12-09_02:34:29.080768)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:34:30.919585 run   osmo-stp_10.42.42.5(pid=12398): stderr: 
| [0;m[38;5;43m20221209023429248 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209023429248 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209023429248 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209023429249 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209023429249 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209023429249 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209023429249 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:34:31.079901 run              patchelf(pid=12401): Terminating (SIGINT)
02:34:31.265257 run              patchelf(pid=12401): Terminated: ok {rc=0}
02:34:31.300806 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12398): Process ended prematurely: osmo-stp_10.42.42.5(pid=12398) [trial-2353↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12398)]  [trial-2353↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
02:34:31.313963 tst      cs_paging_gprs_active.py:38: Test FAILED (8.5 sec)
02:34:31.389284 run   osmo-hlr_10.42.42.2(pid=12395): ERR: Terminated: ERROR {rc=237}  [trial-2353↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12395)]
02:34:31.448700 run   osmo-hlr_10.42.42.2(pid=12395): stdout: 
| (launched: 2022-12-09_02:34:28.156366) 
02:34:31.510800 run   osmo-hlr_10.42.42.2(pid=12395): stderr: 
| [0;m[1;31m20221209023428330 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209023428330 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209023428330 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209023428330 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209023428330 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209023428330 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209023428342 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209023428351 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209023428351 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209023428351 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
02:34:31.563604 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12388): Terminating (SIGTERM)
02:34:31.615620 run iperf3-srv_10.42.42.10(pid=12389): Terminating (SIGTERM)
02:34:31.667890 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12390): Terminating (SIGTERM)
02:34:31.718151 run iperf3-srv_10.42.42.10(pid=12391): Terminating (SIGTERM)
02:34:31.770049 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12394): Terminating (SIGTERM)
02:34:31.817401 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12397): Terminating (SIGTERM)
02:34:31.865049 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12400): Terminating (SIGTERM)
02:34:31.875875 ---      ParallelTerminationStrategy: PID 12388 died...
02:34:31.937934 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12388): Terminated: ok {rc=0}
02:34:31.949131 ---      ParallelTerminationStrategy: PID 12389 died...
02:34:32.009917 run iperf3-srv_10.42.42.10(pid=12389): Terminated {rc=256}
02:34:32.021044 ---      ParallelTerminationStrategy: PID 12390 died...
02:34:32.081141 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12390): Terminated: ok {rc=0}
02:34:32.092121 ---      ParallelTerminationStrategy: PID 12391 died...
02:34:32.151479 run iperf3-srv_10.42.42.10(pid=12391): Terminated {rc=256}
02:34:32.163600 ---      ParallelTerminationStrategy: PID 12394 died...
02:34:32.223734 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12394): Terminated: ok {rc=0}
02:34:32.234818 ---      ParallelTerminationStrategy: PID 12397 died...
02:34:32.291567 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12397): Terminated: ok {rc=0}
02:34:32.302282 ---      ParallelTerminationStrategy: PID 12400 died...
02:34:32.358027 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12400): Terminated: ok {rc=0}
02:34:32.444154 bus                          /gobi_0: Setting Powered False
02:34:33.550868 bus                          /gobi_0: Setting Powered False
02:34:34.661952 bus                          /gobi_6: Setting Powered False
