
----------------------------------------------
trial-2353 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
02:51:28.575223 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:51:28.586598 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
02:51:28.724451 tst         cs_paging_gprs_active.py: using LAC 18556
02:51:28.850026 tst         cs_paging_gprs_active.py: using RAC 196
02:51:28.975437 tst         cs_paging_gprs_active.py: using CellId 18556
02:51:29.101114 tst         cs_paging_gprs_active.py: using BVCI 18557
02:51:29.125827 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:51:29.137807 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:51:29.149570 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:51:29.161388 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:51:29.172917 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:51:29.184696 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:51:29.196515 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:51:29.208125 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
02:51:29.219959 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
02:51:29.334638 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
02:51:29.608666 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
02:51:29.732334 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
02:51:30.039446 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14921): Launched
02:51:30.295220 run iperf3-srv_10.42.42.10(pid=14922): Launched
02:51:30.475497 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
02:51:30.598833 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
02:51:30.926196 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14923): Launched
02:51:31.207597 run iperf3-srv_10.42.42.10(pid=14924): Launched
02:51:31.393879 tst      cs_paging_gprs_active.py:38: start network...
02:51:31.521542 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
02:51:32.111575 run         create_hlr_db(pid=14925): Launched
02:51:32.286647 bus                          /gobi_6: Setting Powered False
02:51:33.304859 run         create_hlr_db(pid=14925): Terminated: ok {rc=0}
02:51:33.699937 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14927): Launched
02:51:33.997557 run   osmo-hlr_10.42.42.2(pid=14928): Launched
02:51:34.112611 run              osmo-stp_10.42.42.5: Starting osmo-stp
02:51:34.633257 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14930): Launched
02:51:34.929911 run   osmo-stp_10.42.42.5(pid=14931): Launched
02:51:35.038604 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
02:51:35.553882 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14933): Launched
02:51:35.659825 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
02:51:35.917844 run              patchelf(pid=14934): Launched
02:51:36.091626 run   osmo-stp_10.42.42.5(pid=14931): ERR: Terminated: ERROR {rc=1}  [trial-2353↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14931)]
02:51:36.218595 run   osmo-stp_10.42.42.5(pid=14931): stdout: 
| (launched: 2022-12-09_02:51:34.783720)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:51:36.346217 run   osmo-stp_10.42.42.5(pid=14931): stderr: 
| [0;m[38;5;43m20221209025134953 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209025134954 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209025134954 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209025134954 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209025134955 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209025134955 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209025134955 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:51:36.469742 run   osmo-stp_10.42.42.5(pid=14931): stdout: 
| (launched: 2022-12-09_02:51:34.783720)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:51:36.591819 run   osmo-stp_10.42.42.5(pid=14931): stderr: 
| [0;m[38;5;43m20221209025134953 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209025134954 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209025134954 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209025134954 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209025134955 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209025134955 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209025134955 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:51:36.734438 run              patchelf(pid=14934): Terminating (SIGINT)
02:51:36.902188 run              patchelf(pid=14934): Terminated: ok {rc=0}
02:51:36.933219 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14931): Process ended prematurely: osmo-stp_10.42.42.5(pid=14931) [trial-2353↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14931)]  [trial-2353↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
02:51:36.942665 tst      cs_paging_gprs_active.py:38: Test FAILED (8.4 sec)
02:51:37.002414 run   osmo-hlr_10.42.42.2(pid=14928): ERR: Terminated: ERROR {rc=237}  [trial-2353↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14928)]
02:51:37.050903 run   osmo-hlr_10.42.42.2(pid=14928): stdout: 
| (launched: 2022-12-09_02:51:33.851114) 
02:51:37.100239 run   osmo-hlr_10.42.42.2(pid=14928): stderr: 
| [0;m[1;31m20221209025134024 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209025134024 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209025134024 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209025134024 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209025134024 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209025134024 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209025134037 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209025134045 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209025134045 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209025134045 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
02:51:37.142030 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14921): Terminating (SIGTERM)
02:51:37.181445 run iperf3-srv_10.42.42.10(pid=14922): Terminating (SIGTERM)
02:51:37.220913 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14923): Terminating (SIGTERM)
02:51:37.260297 run iperf3-srv_10.42.42.10(pid=14924): Terminating (SIGTERM)
02:51:37.299796 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14927): Terminating (SIGTERM)
02:51:37.339159 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14930): Terminating (SIGTERM)
02:51:37.378656 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14933): Terminating (SIGTERM)
02:51:37.387897 ---      ParallelTerminationStrategy: PID 14921 died...
02:51:37.440728 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14921): Terminated: ok {rc=0}
02:51:37.450442 ---      ParallelTerminationStrategy: PID 14922 died...
02:51:37.503157 run iperf3-srv_10.42.42.10(pid=14922): Terminated {rc=256}
02:51:37.512563 ---      ParallelTerminationStrategy: PID 14923 died...
02:51:37.564881 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14923): Terminated: ok {rc=0}
02:51:37.574463 ---      ParallelTerminationStrategy: PID 14924 died...
02:51:37.626472 run iperf3-srv_10.42.42.10(pid=14924): Terminated {rc=256}
02:51:37.635962 ---      ParallelTerminationStrategy: PID 14927 died...
02:51:37.688495 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14927): Terminated: ok {rc=0}
02:51:37.697923 ---      ParallelTerminationStrategy: PID 14930 died...
02:51:37.750236 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14930): Terminated: ok {rc=0}
02:51:37.759877 ---      ParallelTerminationStrategy: PID 14933 died...
02:51:37.812382 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14933): Terminated: ok {rc=0}
02:51:37.900543 bus                          /gobi_0: Setting Powered False
02:51:39.003505 bus                          /gobi_0: Setting Powered False
02:51:40.113700 bus                          /gobi_6: Setting Powered False
