
----------------------------------------------
trial-2354 gprs:nanobts+band-1900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
04:40:11.527041 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:40:11.539041 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
04:40:11.666921 tst                ping_idle_ping.py: using LAC 19133
04:40:11.783121 tst                ping_idle_ping.py: using RAC 8
04:40:11.901566 tst                ping_idle_ping.py: using CellId 19133
04:40:12.017837 tst                ping_idle_ping.py: using BVCI 19134
04:40:12.040302 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:40:12.051326 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:40:12.062041 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:40:12.072775 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:40:12.083470 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:40:12.094203 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:40:12.105131 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
04:40:12.115762 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
04:40:12.405210 tst             ping_idle_ping.py:24: start network...
04:40:12.538341 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
04:40:13.044181 run         create_hlr_db(pid=26125): Launched
04:40:13.228767 bus                          /gobi_6: Setting Powered False
04:40:14.250576 run         create_hlr_db(pid=26125): Terminated: ok {rc=0}
04:40:14.673863 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26127): Launched
04:40:14.992232 run   osmo-hlr_10.42.42.2(pid=26128): Launched
04:40:15.111472 run              osmo-stp_10.42.42.5: Starting osmo-stp
04:40:15.664392 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26130): Launched
04:40:16.099171 run   osmo-stp_10.42.42.5(pid=26131): Launched
04:40:16.326198 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
04:40:16.940041 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26133): Launched
04:40:17.049077 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
04:40:17.308364 run              patchelf(pid=26134): Launched
04:40:17.480821 run   osmo-stp_10.42.42.5(pid=26131): ERR: Terminated: ERROR {rc=1}  [trial-2354↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26131)]
04:40:17.607371 run   osmo-stp_10.42.42.5(pid=26131): stdout: 
| (launched: 2022-12-09_04:40:15.825333)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:40:17.733953 run   osmo-stp_10.42.42.5(pid=26131): stderr: 
| [0;m[38;5;43m20221209044016174 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209044016174 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209044016174 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209044016175 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209044016175 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209044016175 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209044016175 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:40:17.856100 run   osmo-stp_10.42.42.5(pid=26131): stdout: 
| (launched: 2022-12-09_04:40:15.825333)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:40:17.977159 run   osmo-stp_10.42.42.5(pid=26131): stderr: 
| [0;m[38;5;43m20221209044016174 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209044016174 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209044016174 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209044016175 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209044016175 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209044016175 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209044016175 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:40:18.118462 run              patchelf(pid=26134): Terminating (SIGINT)
04:40:18.285229 run              patchelf(pid=26134): Terminated: ok {rc=0}
04:40:18.315402 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=26131): Process ended prematurely: osmo-stp_10.42.42.5(pid=26131) [trial-2354↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26131)]  [trial-2354↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27]
04:40:18.323929 tst             ping_idle_ping.py:27: Test FAILED (6.8 sec)
04:40:18.383989 run   osmo-hlr_10.42.42.2(pid=26128): ERR: Terminated: ERROR {rc=237}  [trial-2354↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26128)]
04:40:18.432830 run   osmo-hlr_10.42.42.2(pid=26128): stdout: 
| (launched: 2022-12-09_04:40:14.834899) 
04:40:18.482486 run   osmo-hlr_10.42.42.2(pid=26128): stderr: 
| [0;m[1;31m20221209044015032 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209044015032 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209044015032 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209044015032 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209044015032 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209044015032 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209044015045 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:nanobts+band-1900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209044015053 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209044015053 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209044015053 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
04:40:18.524479 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26127): Terminating (SIGTERM)
04:40:18.564432 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26130): Terminating (SIGTERM)
04:40:18.603905 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26133): Terminating (SIGTERM)
04:40:18.613143 ---      ParallelTerminationStrategy: PID 26127 died...
04:40:18.666224 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26127): Terminated: ok {rc=0}
04:40:18.675845 ---      ParallelTerminationStrategy: PID 26130 died...
04:40:18.728492 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26130): Terminated: ok {rc=0}
04:40:18.738033 ---      ParallelTerminationStrategy: PID 26133 died...
04:40:18.790894 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26133): Terminated: ok {rc=0}
04:40:18.874633 bus                          /gobi_6: Setting Powered False
